CME Video
hej
Contents |
Runrik 1
hej
Note to self --- Conferencing Configuration
Three-way conferencing is supported as long as the parties are all G.711 users and conference resources are available. Conference resources are configured as follows:
telephony-service
max-conferences 10
If one of the parties in a conference presses Hold, the other two parties will hear the MoH or ToH. However, they will also be able to talk to each other, with the music or tone playing in the background.
Note to self --- http administration
Configuring Web Administration of the Cisco ITS Router
To properly administer the Cisco ITS server through the web, as well as allow end users to administer their phones through the web, the following files must be present in flash:
admin_user.html ephone_admin.html logohome.gif normal_user.html telephony_service.html
To allow administration of the web pages through the web, the following global configuration commands must be entered:
ip http server
ip http path flash
Other commands must be entered under the telephony-service configuration section.
telephony-service
admin-username administrator
!--- This sets up the administrator account used to access the web page.
admin-password cisco
!--- This sets up the password for the admin account.
dn-webedit
!--- (optional) This permits the editing of DNs through the web interface.
time-webedit
!--- (optional) This permits editing of the system time through the web interface.
!
To access the Cisco ITS router through the web, point your browser to the following URL:
http://ITSrouter_ipaddr/telephony_service.html
The URL is the same for everyone. Other .html files are considered internal files called by the telephony-service.html web page. Calling other files directly can lead to JavaScript errors. Users who are to use the web page must be configured first on ephone, as shown below.
ephone 1
username "gpburdell" password letmein
The user (in this example, "gpburdell") can log in and change their forwarding information, perform directory searches, and even configure their own speed dial settings. There is online help available, as well.
Administrators can perform phone or DN adds, deletes, and changes, as well as some system changes. Note that there may be problems if you configure through the web as well as by the command line, because the web page does not poll the Cisco IOS Software configuration periodically, nor does the Refresh button on the browser update this information. In fact, when trying to refresh in that way, you will be logged out of the GUI page and see the “Configuration Change Failed, Configuration Change is not allowed” error message box. Only the Update button on the main menu retrieves the latest changes from the Cisco ITS router.
From the web page, the Write System Configuration button causes changes to be written immediately to NVRAM. However, for regular users, the changes are written every 10 minutes as long as there is no active session on vty, console, and aux lines.
Note: For Update to work, please make sure that at least four free vty lines are available in Cisco ITS, even though one free vty line is enough for normal configuration changes.
Call History information is also available to administrators. First it must be enabled by configuring as follows:
call-history-mib retain-timer 500 call-history-mib max-size 500
At most, 500 entries and 500 minutes of call history are retained in the MIB table.
You can view the call records by choosing View System Configuration from the GUI after logging in, and then choosing View Call History Information.
show version
CME_router#show version | incl 15 Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M1, RELEASE SOFTWARE (fc1) ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1) System image file is "flash0:c2900-universalk9-mz.SPA.154-3.M1.bin" CME_router#
CME_router#show license feature Feature name Enforcement Evaluation Subscription Enabled RightToUse ipbasek9 no no no yes no securityk9 yes yes no yes yes uck9 yes yes no *no* yes datak9 yes yes no no yes NtwkEssSuitek9 yes yes no no yes CollabProSuitek9 yes yes no no yes ios-ips-update yes yes yes no yes SNASw yes yes no no yes hseck9 yes no no no no cme-srst yes yes no no yes mgmt-plug-and-play yes no no no no mgmt-lifecycle yes no no no no mgmt-assurance yes no no no no mgmt-onplus yes no no no no mgmt-compliance yes no no no no conf t license boot module c2900 technology-package securityk9 license boot module c2900 technology-package uck9 license boot module c2900 technology-package datak9 # always 'data' last, otherwise other licenses will be overwritten exit wr reload
CME_router#show license feature Feature name Enforcement Evaluation Subscription Enabled RightToUse ipbasek9 no no no yes no securityk9 yes yes no yes yes uck9 yes yes no *yes* yes datak9 yes yes no yes yes NtwkEssSuitek9 yes yes no no yes CollabProSuitek9 yes yes no no yes ios-ips-update yes yes yes no yes SNASw yes yes no no yes hseck9 yes no no no no cme-srst yes yes no no yes mgmt-plug-and-play yes no no no no mgmt-lifecycle yes no no no no mgmt-assurance yes no no no no mgmt-onplus yes no no no no mgmt-compliance yes no no no no CME_router#
CME_router#conf t CME_router()#telephony-service CME_router()#exit CME_router()#exit CME_router#show telephony-service CONFIG (Version=10.5) ===================== Version 10.5 Max phoneload sccp version 17 Max dspfarm sccp version 18 Cisco Unified Communications Manager Express For on-line documentation please see: http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address UNKNOWN port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 0
max-dn 0
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
c0nf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
web admin system name Admin
web admin customer name Customer
edit DN through Web: disabled.
edit TIME through web: disabled.
background save interval 10 minutes
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
CME_router#show telephony-service license License Supported: cme-srst: Registered, Not In Use. Handle: 0x0 Maximum User License: 0 CSL license count: 0 CSL Requested User License: 0 Used User License: 0 Available User License: 0 Max Users Provisioned (ephone + pool): 0 Allowance - Extra user license: 7 temp_license_expired_event: 0 license_installed_event: 0 license_count_change_event: 0 eula_not_accepted: 1 license_check_approved: 0 license_check_denied: 0 CME_router#
Version Matrix
Collaboration System 10.0(1) kräver http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html
- IP Communicator 8.6(1)
- Telephony service 10.0(1)
- IOS 15.3(3)M1 or 15.2(4)M5 or 15.1(4)M7
- Cisco Unified Video Advantage2.3(1)
CIPC Config
- Set the GUI option "TFTP server" to 10.0.0.1 or whatever IP-address your CME router has
CUVA Config
