Latest revision as of 15:22, 23 November 2015

• .PDF Document CCNA Collaboration Certification Content Updates from CCNA Video and CCNA Voice

[edit] This lab is not finished

This lab is not finished, not even in beta stage... (:-)

Documentation:

• Cisco Unified Communications Manager Express System Administrator Guide
• CUVA Version 2.0
• slideshare.ru: CIPT2 v5.01-1 Enable IP Video Telephony Configuring Cisco Unified Video Advantage

hej

[edit] Note to self --- Conferencing Configuration

Three-way conferencing is supported as long as the parties are all G.711 users and conference resources are available. Conference resources are configured as follows:

   telephony-service
    max-conferences 10

If one of the parties in a conference presses Hold, the other two parties will hear the MoH or ToH. However, they will also be able to talk to each other, with the music or tone playing in the background.

[edit] Using PVDM3 for Video Switching - CME

My environment:  IOS 15.1(4)M, CME 8.6 on 3945

The configuration of video switching DSP farm is similar to the voice conference DSP farm.  There are 2 different types of video conference, homogenous and heterogenous.  For homogenous, assuming the video codec and resolution for endpoints are the same.  For heterogenous, you can have different endpoints with different video codec and resolution.  In this post, I am trying to use 9971, 9951 with unified camera in a CME-only environment.

Since DSP farm can only registered to SCCP CME or UCM, telephony-service configuration needs to be done to allow the video conferencing dspfarm registered to it.  You need AT LEAST ONE SCCP PHONE to initiate the conference ad-hoc or meet-me conference.

1.  voice-card 0 configuration, the new dsp-reservation command reserves a certain portion of DSP for voice.  dsp-reservation 0 means all DSP will be used for video.


voice-card 0
 voice-service dsp-reservation 0
 dsp services dspfarm

2. voice-service voip configuration, allow sip and h323 interwork and enable sip registrar

voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
 sip
  registrar server

3. SIP CME configuration, remember to enable unified camera and video, either globally or per phone.

voice register global
 mode cme
 source-address 192.168.24.11 port 5060
 bandwidth video tias-modifier 1024000 negotiate end-to-end
 max-dn 100
 max-pool 100
 tftp-path flash:
 create profile sync 0000519212952386
 camera
 video
!
voice register dn  1
 number 2001
!
voice register dn  2
 number 2002
!
voice register dn  3
 number 2003
!
voice register pool  1
 id mac ACA0.166F.D863
 type 9971
 number 1 dn 1
 camera
 video
!
voice register pool  2
 id mac ACA0.16FC.ED7F
 type 9971
 number 1 dn 2
 camera
 video
!
voice register pool  3
 id mac 9CAF.CAFF.9ABE
 type 9951
 number 1 dn 3
 camera
 video

4. Homogenous video conference DSP farm configuration

sccp local GigabitEthernet0/0

sccp ccm 192.168.24.11 identifier 1 priority 1 version 7.0 
sccp
!
sccp ccm group 1
 associate ccm 1 priority 1
 associate profile 2 register VBRIDGE

!
dspfarm profile 2 conference video homogeneous
 codec g722-64
 codec g711ulaw
 codec h264 vga frame-rate 30 bitrate 1mbps
 maximum sessions 3
 associate application SCCP

5. Telephony-service configuration

telephony-service
 sdspfarm units 10
 sdspfarm tag 2 VBRIDGE
 conference hardware
 video
  maximum bit-rate 1024000
 max-ephones 100
 max-dn 100
 ip source-address 192.168.24.11 port 2000
 cnf-file location flash:
 max-conferences 154 gain -6
 transfer-system full-consult
 create cnf-files version-stamp 7960 Jul 15 2011 15:25:15

6. Create ephone-template and apply it to the ephone who wants to initiate meetme conference

ephone-template  1
 conference admin
 softkeys hold  Join Newcall Resume Select
 softkeys idle  ConfList Gpickup Join Login Newcall Pickup Redial RmLstC
 softkeys seized  Redial Endcall Cfwdall Pickup Gpickup Callback Meetme
 softkeys connected  Hold Trnsfer Park Endcall Confrn ConfList Join Select RmLstC

7.  Create ad-hoc video and meetme video ephone-dn 

ephone-dn  10  octo-line
 number 3333
 conference ad-hoc video
 preference 1
 no huntstop
!
!
ephone-dn  11  octo-line
 number 3334
 conference meetme video
 preference 1
 no huntstop

8.  Try to initiate a meetme video conference from the SCCP phone, the let the 9971 phones call in the meetme number.  It will work.  I don't have enough PVDM3 for heterogenous video conference therefore I didn't try the ad-hoc video conference, if you have tried it and it works, feel free to share with me your result.  :)

An iPhone app for CME Config Generation:
http://itunes.apple.com/us/app/cme-config-generator/id453025819?ls=1&mt=8
Posted by Mr & Mrs Wong at 11:38 PM 1 comments
Labels: Cisco, CUCME, PVDM3, Video 

[edit] Note to Self: Taking Screenshot on Cisco IP Phone and Cius

Try to access this link from your browser:

http://your-ip-phone-address/CGI/Screenshot

Enter your end user username and password, you will see the phone screenshot in your browser.

It is working for both IP phone and Cius.

[edit] Note to self --- http administration

Configuring Web Administration of the Cisco ITS Router

   admin_user.html
   ephone_admin.html
   logohome.gif
   normal_user.html
   telephony_service.html

   ip http server
     ip http path flash

   telephony-service
    admin-username administrator 
    !--- This sets up the administrator account used to access the web page.
    admin-password cisco  
    !--- This sets up the password for the admin account.
    dn-webedit    
    !--- (optional) This permits the editing of DNs through the web interface.
    time-webedit  
    !--- (optional) This permits editing of the system time through the web interface.
   !

   http://ITSrouter_ipaddr/telephony_service.html

   ephone 1
    username "gpburdell" password letmein

   call-history-mib retain-timer 500
   call-history-mib max-size 500

You can view the call records by choosing View System Configuration from the GUI after logging in, and then choosing View Call History Information.

[edit] show version

CME_router#show version | incl 15
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M1, RELEASE SOFTWARE (fc1)
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
System image file is "flash0:c2900-universalk9-mz.SPA.154-3.M1.bin"
CME_router#

CME_router#show license feature
Feature name             Enforcement  Evaluation  Subscription   Enabled  RightToUse
ipbasek9                 no           no          no             yes      no
securityk9               yes          yes         no             yes      yes
uck9                     yes          yes         no            *no*      yes
datak9                   yes          yes         no             no       yes
NtwkEssSuitek9           yes          yes         no             no       yes
CollabProSuitek9         yes          yes         no             no       yes
ios-ips-update           yes          yes         yes            no       yes
SNASw                    yes          yes         no             no       yes
hseck9                   yes          no          no             no       no
cme-srst                 yes          yes         no             no       yes
mgmt-plug-and-play       yes          no          no             no       no
mgmt-lifecycle           yes          no          no             no       no
mgmt-assurance           yes          no          no             no       no
mgmt-onplus              yes          no          no             no       no
mgmt-compliance          yes          no          no             no       no

conf t 
license boot module c2900 technology-package securityk9
license boot module c2900 technology-package uck9
license boot module c2900 technology-package datak9
# always 'data' last, otherwise other licenses will be overwritten
exit 

wr
reload

CME_router#show license feature
Feature name             Enforcement  Evaluation  Subscription   Enabled  RightToUse
ipbasek9                 no           no          no             yes      no
securityk9               yes          yes         no             yes      yes
uck9                     yes          yes         no            *yes*     yes
datak9                   yes          yes         no             yes      yes
NtwkEssSuitek9           yes          yes         no             no       yes
CollabProSuitek9         yes          yes         no             no       yes
ios-ips-update           yes          yes         yes            no       yes
SNASw                    yes          yes         no             no       yes
hseck9                   yes          no          no             no       no
cme-srst                 yes          yes         no             no       yes
mgmt-plug-and-play       yes          no          no             no       no
mgmt-lifecycle           yes          no          no             no       no
mgmt-assurance           yes          no          no             no       no
mgmt-onplus              yes          no          no             no       no
mgmt-compliance          yes          no          no             no       no
CME_router#

CME_router#conf t
CME_router()#telephony-service
CME_router()#exit
CME_router()#exit
CME_router#show telephony-service
CONFIG (Version=10.5)
=====================
Version 10.5
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html 

protocol mode default
ip source-address UNKNOWN port 2000
ip qos dscp:
 ef (the MS 6 bits, 46, in ToS, 0xB8) for media
 cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
 af41 (the MS 6 bits, 34, in ToS, 0x88) for video
 default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 0
max-dn 0
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
c0nf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US   (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US    (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
web admin system name Admin
web admin customer name Customer
edit DN through Web:  disabled.
edit TIME through web:  disabled.
background save interval 10 minutes
Log (table parameters):
     max-size: 150
     retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag. 

CME_router#show telephony-service license
License Supported:
cme-srst: Registered, Not In Use. Handle: 0x0
Maximum User License: 0
CSL license count: 0
CSL Requested User License: 0
Used User License: 0
Available User License: 0
Max Users Provisioned (ephone + pool): 0
Allowance - Extra user license: 7
temp_license_expired_event: 0
license_installed_event: 0
license_count_change_event: 0
eula_not_accepted: 1
license_check_approved: 0
license_check_denied: 0
CME_router#

[edit] Version Matrix

Collaboration System 10.0(1) kräver http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html

• IP Communicator 8.6(1)
• Telephony service 10.0(1)
• IOS 15.3(3)M1 or 15.2(4)M5 or 15.1(4)M7
• Cisco Unified Video Advantage2.3(1)

[edit] CIPC Config

• Set the GUI option "TFTP server" to 10.0.0.1 or whatever IP-address your CME router has

[edit] CUVA Config

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmevideo.html

7. end DETAILED STEPS

Command or Action

Purpose

Step 1

enable

Router> enable

Enables privileged EXEC mode.

   Enter your password if prompted.

Step 2

configure terminal

Router# configure terminal

Enters global configuration mode.

Step 3

telephony-service

Router(config)# telephony-service

Enters telephony-service configuration mode.

Step 4

service phone videoCapability { 0 | 1 }

Router(config-telephony)# service phone videoCapability 1

Enables or disables video capability parameter for all applicable IP phones associated with a Cisco Unified CME router.

   The parameter name is word and case-sensitive.
   0 —Disable (default).
   1 —Enable.

Step 5

video

Router(config-telephony)# video

(Optional) Enters video configuration mode.

   Required only if you want to modify the maximum value of the video bandwidth for all video-capable phones.

Step 6

maximum bit-rate value

Router(conf-tele-video)# maximum bit-rate 256

(Optional) Sets the maximum IP phone video bandwidth, in kilobits per second.

   value —Range: 0 to 10000000. Default: 10000000.

Step 7

end

Router(conf-tele-video)# end

Exits to privileged EXEC mode. Video Capabilities on a Phone

[edit] Youtube tutorials

• VIDEO: Cisco Video Advantage by aspenmountainpeaks
• TELEFONSVARARE:
  • AIM CUE Eval License by aspenmountainpeaks Inbyggd Linux telefonsvarare i c2811-router
  • Upgrade AIM CUE
  • AIM CUE Short license update CUCM med AIM-CUE integration
  • AIM CUE uppgradering via tftp server "cue-vm-k9.aim.7.4.1.pkg"
    • Unified CM Express ... Versions
  • unity_exp/rel8_0/online_help/GUI_PDF/guiadmin80.pdf

• Configure Cisco Unified Personal Communicator to control Cisco IP Communicator
• Cisco IOS Tip - See what protocols are running through your router

VAR ÄR MATRIX FÖR vilka versioner av OS som stöds på AIM2-CUE ??
[https://software.cisco.com/download/release.html?mdfid=283671889&flowid=45715&softwareid=282774362&release=8.6.11&relind=AVAILABLE&rellifecycle=&reltype=latest CiscoDownload for Unity Express Version 8.6.11

[edit] It Works !!!

Proof of Concept

• Camera1: Microsoft Lifecam Studio, Model 142S
• Camera2: Logitech V-UAX16

[edit] Show running

CME_router#
CME_router#
CME_router#
CME_router#show running
Building configuration...


Current configuration : 5478 bytes
!
! Last configuration change at 10:13:02 EST Tue Oct 13 2015 by nit
! NVRAM config last updated at 10:08:34 EST Tue Oct 13 2015 by nit
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CME_router
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
!
no aaa new-model
clock timezone est 1 0
clock summer-time EST recurring
!
!
!
!
!
!
!
!
!
!
!
!
!
!


!
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 10.0.0.1 10.0.0.10
!
ip dhcp pool ccp-pool
 import all
 network 10.10.10.0 255.255.255.248
 default-router 10.10.10.1
 lease 0 2
!
ip dhcp pool PUTTE
 network 10.0.0.0 255.255.255.0
 default-router 10.0.0.1
 domain-name cnap.hv.se
 dns-server 10.0.0.1
 option 150 ip 10.0.0.1
!
!
!
ip domain name yourdomain.com
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
cts logging verbose
!
crypto pki trustpoint TP-self-signed-254623785
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-254623785
 revocation-check none
 rsakeypair TP-self-signed-254623785
!
!
crypto pki certificate chain TP-self-signed-254623785
 certificate self-signed 01
  30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
  30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 32353436 32333738 35301E17 0D313431 32303530 38343935
  345A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
  532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3235 34363233
  37383530 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
  DB63372F 7B0C2146 DF9B4A38 1AECD693 F2FDE454 9B25C317 1C486842 E6DC3D51
  B8612E4D D59CBF34 EE29C6B3 40B641F9 7AF3CECA F753A7ED 87FBC8B0 6C43DF9B
  96F9CE40 27441B0A 82AA275C EF852A40 4544B85B D9B088D3 A4D16EAD 9F31A01C
  CA7BCAAD AAFE1B93 2C0F2408 32B33101 82920C08 61AD6736 D2BFCF17 2EB97955
  02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
  23041830 16801482 B8BD6E0E 2F6F2FE1 34FAC5F8 566436A6 E853DA30 1D060355
  1D0E0416 041482B8 BD6E0E2F 6F2FE134 FAC5F856 6436A6E8 53DA300D 06092A86
  4886F70D 01010505 00038181 00BE7C75 BA1B38B8 930C6FD1 1F7E96C6 1F5D1FB5
  8D8D7FB9 184892FE EF5A9D46 922AB6CE 7E307A3C 00773D65 947782C9 42174DED
  A09D1F87 F13B1040 33380CB5 D1BFED4C AFBF3A22 E3BE6FFF 9665A43E 5D23BEA3
  C463747B F35E3559 A921DACD 12368A04 B1947344 1D69C8AC 22B1D75C F5C298B8
  2B50A51F 897263BC 950D913B 69
        quit
voice-card 0
!
!
!
!
!
!
!
!
license udi pid CISCO2901/K9 sn FCZ184994CE
license boot module c2900 technology-package securityk9
license boot module c2900 technology-package uck9
license boot module c2900 technology-package datak9
!
!
username robert privilege 15 secret 5 $1$Is8J$Ld/7ht5tpXURDVxPywbVB0
username nit privilege 15 secret 5 $1$pTsD$viN8qJ0U5LITA117hXfW71
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
 ip address 10.0.0.1 255.255.255.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 ip address dhcp
 duplex auto
 speed auto
!
interface Serial0/1/0
 no ip address
 shutdown
 clock rate 125000
!
interface Serial0/1/1
 no ip address
 shutdown
 clock rate 125000
!
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
!
!
tftp-server flash:/SIP45.9-1-1SR1S.loads alias SIP45.9-1-1SR1S.loads
tftp-server flash:/term45.default.loads alias term45.default.loads
access-list 23 permit 10.10.10.0 0.0.0.7
!
control-plane
!
 !
 !
 !
 !
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
!
!
!
!
!
gatekeeper
 shutdown
!
!
telephony-service
 video
 max-ephones 20
 max-dn 100
 ip source-address 10.0.0.1 port 2000
 service phone videoCapability 1
 cnf-file location flash:
 load 7965 term65.default.loads
 voicemail 8888
 max-conferences 8 gain -6
 web admin system name administrator password cisco
 dn-webedit
 time-webedit
 transfer-system full-consult
 create cnf-files version-stamp 7960 Oct 12 2015 16:20:13
!
!
ephone-dn  1
 number 1001
 name First Phone
!
!
ephone-dn  2
 number 1002
 name Second Phone
!
!
ephone-dn  3
 number 1013
 name Physical SeventyNine65
!
!
ephone  1
 device-security-mode none
 description Make sure you change the MAC-address to your PC
 video
 mac-address 001E.4F49.9D84
 type CIPC
 button  1:1
!
!
!
ephone  2
 device-security-mode none
 video
 mac-address 001E.4F48.C8F6
 type CIPC
 button  1:2
!
!
!
ephone  11
 device-security-mode none
 mac-address 04C5.A4B1.8EAF
 button  1:1
!
!
!
ephone  13
 device-security-mode none
 mac-address 04C5.A4B1.912E
 button  1:3
!
!
!
banner exec ^C Welcome to the dark side... ^C
banner login ^C  login with username  nit  and password   nit ^C
!
line con 0
 login local
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet ssh
line vty 5 15
 access-class 23 in
 privilege level 15
 login local
 transport input telnet ssh
!
scheduler allocate 20000 1000
ntp server 193.10.203.1
!
end

CME_router#
CME_router#
CME_router#
CME_router#
CME_router#
CME_router#
CME_router#
CME_router#
CME_router#
CME_router#

[edit] BOOKS

Table of Contents

Part 1: Voice Perspectives

1. Traditional Voice vs. Unified Voice
2. Understanding the Pieces of Cisco Unified Communications
3. Understanding the Cisco IP Phone Concepts and Registration

Part 2: Cisco Unified Communications Manager Express and Cisco Unity Express

4. Getting Familiar with CME Administration
5. Managing Endpoint and End Users with CME
6. Understanding the CME Dial-Plan
7. Enabling Telephony Features with CME
8. Understanding Cisco Unity Express

Part 3: Cisco Unified Communications Manager
9. Getting Familiar with CUCM Administration
10. Managing Endpoint and End Users with CUCM
11. Understanding the CUCM Dial-Plan
12. Enabling Telephony Features with CUCM
13. Enabling Mobility Features with CUCM

Part 4: Cisco Unity Connection, CUCM IM and Presence, and Cisco Telepresence
14. Voicemail Integration with Unity Connection
15. Enabling CUCM IM and Presence
16. Understanding Cisco Telepresence

Part 5: Voice Network Management and Troubleshooting
17. Common CME Management and Troubleshooting Issues
18. Common CUCM Management and Troubleshooting Issues
19. Unity Connection and CUCM IM and Presence Management and Troubleshooting

Part 6: Final Preparation
20. Final Preparation

Appendix A. Answers to the Do I Know This Already? Quizzes
Appendix B. Exam Updates
Appendix C. Memory Tables
Appendix D. Memory Tables Answer Key
Appendix E. Study Planner
Glossary

[edit] DUSTIN Inköpslista

• 10st á 649kr Artikelnr. 5010614505 Microsoft LifeCam Studio for Business (tot 6490:-)

• 1st á 129kr Artikelnr. 5010795354 Logilink Buntband 5 Olika Längder 600st Inkl Tång
• 5st [1]
• 5st á 45kr utp-cat6-keystone-connector-black
• 1st á kr patchpanel-24xrj45-emptyse bild
• 6st á 545kr Artikelnr. 5010876618 7extra kontakter, utan strömbrutare ELLER
• 6st á 295kr Artikelnr. 5010779171 utan brytare, utan amperemeter
• OVANSTÅENDE KOPPLAS IN I BEFINTLIG LIST, som har en strömbrytare...

Prio 2

• 6st á 255kr Artikelnr. 5010042141 Deltaco I/O Card PCI 1xSerial 16550C DB9male Low Profile
• 2st á 849 Artikelnr. 5010620091 Logitech HD Pro Webcam C920 (tot 1698:-)

• ...

Bundle listan: lösa enheter, längst bak i listan

Need

• 6 st VIC2-2FXO= PSTN 2-port HWIC module for analog phones and fax devices
• 6 st VIC3-2FXS/DID= PSTN inward dial 2-port HWIC module for connection to POTS

Greed

• 6 st PVDM3-16= 16-channel high-density voice and video DSP module SPARE

Ej bundle listan??

• 6 st ISM-SRE-300-K9 Cisco Integrated Services-Ready Engine on Cisco ISR G2s is fully self-contained, with dedicated onboard processing, memory, and storage.
• 6 st mjukvara för att köra CUE (Cisco Unity Express) (dvs telefonsvarare) på ISM-SRE-300-K9

[edit] Contacts from Conference

• Belgium: Pierre de Fooz,Maître-Assistant at Haute Ecole Province de Liège, Belgium (CCNA CCDA CWNA CCSP (SECUR+SNPA) CCNP (BSCI+BCMSN+ISCW+ONT) CCDP)