IPv6-lab1

From Datateknik
Revision as of 15:15, 14 October 2014 by Imra (Talk | contribs)

Jump to: navigation, search

Contents

Lab 1 -- Connecting to the IPv6 internet

Router connectivity

  1. Connect your router to the CNAP-switch, which in turn connect to the CNAP-Brouter for L3-Routing
  2. enable plug-and-play IPv6 addressing on your router-port
  3. What IPv4 address (and default gateway did you get ?)
  4. enable plug-and-play IPv6 addressing on your router-port
  5. What IPv6 address (and default gateway did you get ?)
  6. traceroute to 2001:6b0:1d:10::11, how many router-hops?
  7. define DNS-server as 2001:6b0:1d:10::11
  8. how many router-hops is it to www.facebook.com?
  9. Found any fun IPv6-addresses (leet-speak!?!)
  10. Is there any difference between "a connection on port 1-6 in the CNAP-switch" and "a connection on port 7-23 in the CNAP-switch"? What?

WARNING: Do not configure link-local address FE80::1 -- Every other group might use the same address! User FE80::c2 where c is your pod, and 2 is your PC's number

Basic EIGRP

  1. enable ipv6 eigrp 1 and make sure that you become a neighbor with CNAP-brouter
  2. Every group (POD) gets 16 IPv6 subnets 2001:6b0:1d:1x0/60 where x is the POD-letter

Example: POD C's third network would be 2001:6b0:1d:1C2/64

  1. How many other groups have announced networks according to the routing table?
  2. Create a loopback interface with a IPv6 address and announce it over EIGRP
  3. Go to another group and check if they can see your network in their routing table?
  4. can you traceroute to the other group
  5. Try also ping, but it's boring...
  6. If you are into routing; create more loopbacks and try to summarize them. Don't steal networks from other PODS!
    No prob's if you want to jump this point, and skip to the next one

Client IPv6 Connectivity

  1. Connect your PC directly to the "internet" and download [www.teeworlds.com], then disconnect.
  2. Disconnect your PC from the internet (:-)
  3. Connect your pc to the other router ethernet port
  4. Make sure that your router ethernet interfaces are UP/UP
  5. Configure static IPv6 addresses (global and link-local) on the router interface facing the PC
  6. Configure static global IPv6 addressing on the PC (IP,mask + default gateway and DNS)
    DNS addresses are 2001:6b0:1d:10::11 and 2001:6b0:1d:10::12
  7. can you TRACERT to ipv6.google.com? why?
  8. can you TRACERT to www.volvo.com? why?
  9. can you surf to ipv6.google.com?
  10. can you surf to www.volvo.com?
  11. can you surf to www.volvo.com through Application Level Gateway (ALG) ?
  12. Set up a teeworlds server and invite your friends
  13. Remove your PC addressing configuration
  14. Enable stateless autoconf (SLAAC) of your PC on the router
  15. What address did your PC get? why not eui64?
  16. test teeworlds again
  17. Enable stateful autoconf (DHCPv6) of your PC on the router and try to give the PC the shortest possible IPv6-address.
  18. try IPCONFIG /RELEASE6 and /RENEW6 etc on the PC
  19. Play some teeworlds until you want to go home... (:-)

Good Luck /Robert

Personal tools
Namespaces

Variants
Actions
Navigation
Tools