CNAP Blade Chassis

From Datateknik
(Difference between revisions)
Jump to: navigation, search
(Dell Chassi)
(IT's DELL Chassi)
Line 73: Line 73:
 
[[File:ITs-DELL-chassi.png|right|x200px]]
 
[[File:ITs-DELL-chassi.png|right|x200px]]
  
* Management: CMC-HBJP85J | M1000e
+
* Chassi: CMC-HBJP85J | M1000e | Service Tag: HBJP85J
 +
* Blades: Model PowerEdgeM710HD | Service Tag 83XN85J
 +
** CPU Information 2 x Intel(R) Xeon(R) CPU E5649 @ 2.53GHz
 +
** ITs Address: https://blc04.server.hv.se
 +
** CNAP Management address: 192.168.17.xx
 +
** Total System Memory 192.0  GB
 +
* 10GBE Switch a.k.a. I/O Module (IOM)
 +
** Model M8024-k 10GbE SW
 +
** Service Tag 4CJP85J
  
*DRAC [http://en.community.dell.com/support-forums/servers/f/177/t/11347224 default password]
+
 
*
+
* xx
 +
*yy
  
 
== IP Addresses ==
 
== IP Addresses ==

Revision as of 09:42, 5 December 2018

hej

Contents

CNAP Blade Chassis @ hv.se

There are two chassis in the CNAP network: one Dell, and two HP

HP BLc 3000 Enclosure

Blc3000-front.png

Username: Administrator   Password: JUFBSWIX (for blc3000 in b118)
Username: Administrator   Password: 3H0TDQQV (for blc3002 in b123)

SET MANAGEMENT IP ADDRESS

  • Plug in the cable in OA, not uplink !!
  • SET IPCONFIG STATIC 1 192.168.16.16 255.255.255.0

Drivers & Firmware

Blade Management

  • Fixing HP ILO2 Java Remote Console fails to start with ClassNotFound remcons.class
  • Fixing HP ILO2 Java Remote Console] fails to start with Application Blocked. Click for details security settings...certificate from running
    1. run the application "Configure Java"
    2. Under /Security\ press "Edit Site List..." and add the IP-address of youre BladePC (Example: https://192.168.20.181)
  • Fix Java:
    1. Uninstall Mozilla Firefox
    2. Download win32 Firefox 3.5.19 from ftp.mozilla.org/pub/firefox/releases
    3. Using Firefox3.5, goto java.com/download/ , run installer (doubleclick), and install java
    4. Close and restart Mozilla Firefox
    5. Google "verify java" and test it from the java.com-site

SWITCH: GbE2c Ethernet Blade Switch

HP Cisco switch: Specs on page 16 -- HP SWITCH CISCO CATALYST 3020 BLADE Cisco MDS 9124e 24-Port Fabric Switch for BLc3000 BLc7000 HP AG642A DS-HP-FC-K9

Dell Chassi

Blc3000-front.png


192.168.20.9 <--- Hela "lådan" med alla individuella fysiska servrar.
root / calvin

Media -> Detach (all)
Media -> Attach Server-3 -> Lägg till .iso-filen
Console -> Starta om servern -> Boot menu -> Kör .iso
Efter vi gjort inställningar kan vi nu SSHa in

IT's DELL Chassi

ITs-DELL-chassi.png
  • Chassi: CMC-HBJP85J | M1000e | Service Tag: HBJP85J
  • Blades: Model PowerEdgeM710HD | Service Tag 83XN85J
    • CPU Information 2 x Intel(R) Xeon(R) CPU E5649 @ 2.53GHz
    • ITs Address: https://blc04.server.hv.se
    • CNAP Management address: 192.168.17.xx
    • Total System Memory 192.0 GB
  • 10GBE Switch a.k.a. I/O Module (IOM)
    • Model M8024-k 10GbE SW
    • Service Tag 4CJP85J


  • xx
  • yy

IP Addresses

alfa.cnap.hv.se[/var/named]# grep 3000 db.cnap.hv.se
blc3000.cnap.hv.se.     3600    IN      A       192.168.20.8
hp-left.cnap.hv.se      3600    IN      A       192.168.17.38
hp-right.cnap.hv.se     3600    IN      A       192.168.17.39
 
Blade-left.cnap.hv.se.  3600    IN      A       192.168.17.26
Blade-right.cnap.hv.se. 3600    IN      A       192.168.17.25

HP Switch Configuration

>> Information# /info/port

Port Tag RMON PVID       NAME                  VLAN(s)
---- --- ---- ----- -------------- -------------------------------
1     y   d      1* Downlink1      1 11 12 16 20
2     y   d      1* Downlink2      1 11 12 16 20
3     y   d      1* Downlink3      1 11 12 16 20
4     y   d      1* Downlink4      1 11 12 16 20
5     y   d      1* Downlink5      1 11 12 16 20
6     y   d      1* Downlink6      1 11 12 16 20
7     y   d      1* Downlink7      1 11 12 16 20
8     y   d      1* Downlink8      1 11 12 16 20
9     y   d      2  Downlink9      2
10    n   d      2  Downlink10     2
11    n   d      2  Downlink11     2
12    n   d      2  Downlink12     2
13    n   d      2  Downlink13     2
14    n   d      2  Downlink14     2
15    n   d      2  Downlink15     2
16    n   d      2  Downlink16     2
17    n   d      1* Xconnect1      1
18    n   d      1* Xconnect2      1
19    n   d   4095  Mgmt           4095
20    n   d      1* Uplink1        1
21    n   d      2  Uplink2        2
22    n   d      2  Uplink3        2
23    n   d      1* Uplink4        1
24    y   d      1* Uplink5        1 11 12 16 17 20 42

* = PVID is tagged.

>> Information# /info/l2/vlan

VLAN                Name                Status            Ports
----  --------------------------------  ------  -------------------------
1     Default VLAN                      ena     1-14 17 18 20 23 24
Reminder: Port 17 needs to be enabled.
Reminder: Port 18 needs to be enabled.
2     STORAGE                           ena     15 16 21 22
10    VLAN 10                           ena     9
11    HP-VildaVastern                   ena     1-8 24
12    HP-StudentLab                     ena     1-8 24
16    HP-NATciscoLabPC                  ena     1-8 24
17    RA Mgmnt VLAN                     ena     24
20    VLAN 20                           ena     1-8 24
42    Native Blackhole VLAN             ena     24
4095  Mgmt VLAN                         ena     19 

CNAP uplink trunk on port 24

  • Use . (single period) to print menu
  • Use .. to move up one level

switchport mode trunk

/cfg/port
Enter port (1-24): 24
>> Port 5# tag
Current VLAN tag support: disabled
Enter new VLAN tag support [d/e]: e

create vlan

/cfg/l2/vlan
Enter VLAN number: (1-4095) 17
ena
Current status: disabled
New status: enabled
/cfg/l2/vlan
Enter VLAN number: (1-4095) 17
name "RA Management VLAN"

allowed-vlans

/cfg/l2/vlan 17
add 24
/cfg/l2/vlan 20
add 24
/cfg/l2/vlan 24
add 24

Before you finish remember to apply and save the changes. You apply them to make them active, and you save them so they are persistent between reboots of the switch.

apply
save

iSCSI Storage LAN -- using VLAN 2

  • Use . (single period) to print menu
  • Use .. to move up one level

Create, Name & Enable VLAN 2

>> VLAN 2# /cfg/l2/vlan/name
Enter VLAN number: (1-4095) 2
Current VLAN name:
Pending new VLAN name: VLAN 2
Enter new VLAN name: STORAGE

>> VLAN 2# /cfg/l2/vlan/
Enter VLAN number: (1-4095) 2
------------------------------------------------------------
[VLAN 2 Menu]
     name     - Set VLAN name
     stg      - Assign VLAN to a Spanning Tree Group
     add      - Add port to VLAN
     rem      - Remove port from VLAN
     def      - Define VLAN as list of ports
     ena      - Enable VLAN
     dis      - Disable VLAN
     del      - Delete VLAN
     cur      - Display current VLAN configuration

>> VLAN 2# ena
Current status: disabled
New status:     enabled

>> VLAN 2#  apply

>> VLAN 2#  /info/l2/vlan/dump 

ADD PORTS TO VLAN

>> VLAN 1# /cfg/l2/vlan/
Enter VLAN number: (1-4095) 2
------------------------------------------------------------
[VLAN 2 Menu]
    name     - Set VLAN name
    stg      - Assign VLAN to a Spanning Tree Group
    add      - Add port to VLAN
    rem      - Remove port from VLAN
    def      - Define VLAN as list of ports
    ena      - Enable VLAN
    dis      - Disable VLAN
    del      - Delete VLAN
    cur      - Display current VLAN configuration

>> VLAN 2# add
Current VLAN 2:  empty
Enter port to be added: 21
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    21 

>> VLAN 2# add
Current VLAN 2:  empty
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    21
Enter port to be added: 22
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    21 22

>> VLAN 2# add
Current VLAN 2:  empty
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    21 22
Enter port to be added: 15
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    15 21 22

>> VLAN 2# add
Current VLAN 2:  empty
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    15 21 22
Enter port to be added: 16
Current ports for VLAN 2:        empty
Pending new ports for VLAN 2:    15 16 21 22

>> VLAN 2#  /info/l2/vlan/dump 

Configure default VLAN on ports

>> Port 1# /cfg/port/pvid
Enter port (1-24):      15
Current port VLAN ID: 1
Enter new port VLAN ID [1-4094]: 2

>> Port 15# /cfg/port/pvid
Enter port (1-24):      16
Current port VLAN ID: 1
Enter new port VLAN ID [1-4094]: 2 

>> Port 16# /cfg/port/pvid
Enter port (1-24):      21
Current port VLAN ID: 1
Enter new port VLAN ID [1-4094]: 2 

>> Port 21# /cfg/port/pvid
Enter port (1-24):      22
Current port VLAN ID: 1
Enter new port VLAN ID [1-4094]: 2

>> Port 22#
>> Port 15# tagpvid
Current tag pvid support: enabled
Enter new tag pvid support [d/e]: d
Port 16 changed to pvid untagged.
 
>> Port 16# tagpvid
Current tag pvid support: enabled
Enter new tag pvid support [d/e]: d
Port 16 changed to pvid untagged.

>> Port 16#  cur
Current port 16 configuration: enabled, PVID 2
   name Downlink16
   The DLF rate control currently turned off
   The Multicast rate control currently turned off
   The Broadcast rate control currently turned off
   802.1p priority: 0
   ACL Port config is empty

>> Port 16#


Before you finish remember to apply and save the changes. You apply them to make them active, and you save them so they are persistent between reboots of the switch.

apply
save

Remote Management: Telnet Connectivity

Configuring an IP Interface

Källa: BLADE OS Application Guide HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Version 5.1 Advanced Functionality Software

1.Configure an IP interface for the Telnet connection, using the sample IP address of 205.21.17.3. 
2.The pending subnet mask address and broadcast address are automatically calculated.
3.If necessary, configure up to two default gateways. 
4.Configuring the default gateways allows the switch to send outbound traffic to the routers.
5.Apply, verify, and save the configuration.
#/cfg/l3/if 256  (Select IP interface 256, used by web-GUI for administration)
IP Interface 256#addr 192.168.17.39(Assign IP address for the interface)
Current IP address:      0.0.0.0
New pending IP address:  205.21.17.39
IP Interface 256# mask 255.255.255.0
Pending new subnet mask: 255.255.255.0
IP Interface 1#ena       (Enable IP interface 1)
IP Interface 5#/cfg/l3/gw 1   (Select primary default gateway)
Default gateway 1#addr 192.168.17.1  (Assign IP address for primary router)
Default gateway 1#ena                (Enable primary default gateway)
Default gateway 1#../gw 2            (Select secondary default gateway)
Default gateway 2#addr 0.0.0.0       (Assign address for secondary router)
Default gateway 2#disable            (DISEnable secondary default gateway)
Default gateway 2#apply              (Apply the configuration)
Default gateway 2#save               (Save the configuration)
#/info/l3/ip
#/cfg/dump                           (Verify the configuration)

Select VLAN for Management Port

Källa: Deploying the HP GbE2c Ethernet Blade Switch for HP c-Class BladeSystem into a Cisco-based Network HOWTO

  /cfg/l2/vlan 17             <-- DOES NOT WORK
  add 19                      <-- port 19 will NOT move !!
 
  /cfg/l3/if   <number>  /vlan   <vlan#>  /ena/apply
>> Layer 3# dump
IP information:
Interface information:
  1: 192.168.20.191  255.255.255.0   192.168.20.255,  vlan 20, up            <--   WRONG ?!?
 17: 192.168.17.48   255.255.255.0   192.168.17.255,  vlan 17, up
256: 10.10.10.10     255.255.255.0   10.10.10.255,    vlan 4095, up

LLDP = IEEE 802.1ab protocol (CDP-like functionality)

Link Layer Discovery Protocol. An IEEE 802.1ab protocol that provides CDP-like functionality

Källa: BLADE OS Application Guide HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Version 5.1 Advanced Functionality Software Globally enable LLDP

/cfg/l2/lldp/on

Port Level: Transmit and Receive Control

/cfg/l2/lldp/port
>> LLDP Port# admstat tx_rx (Transmit and receive LLDP)
>> LLDP Port# admstat tx_only (Only transmit LLDP)
>> LLDP Port# admstat rx_only (Only receive LLDP)
>> LLDP Port# admstat disabled (Do not participate in LLDP)
>> # /cfg/l2/lldp/cur  (View LLDP status of all ports)
or
>> # /cfg/l2/lldp/port <n> /cur (View status of the selected port)

Cisco IOS

 conf t
 lldp run
 interface range gig 0/1 - 24
   lldp

>> Layer 2# /info/l2/vlan/dump


VLAN                Name                Status            Ports
----  --------------------------------  ------  -------------------------
1     Default VLAN                      ena     1-18 20-24
Reminder: Port 17 needs to be enabled.
Reminder: Port 18 needs to be enabled.
10    VLAN 10                           ena     9
16    VLAN 16                           dis     1-8
Reminder: VLAN 16 needs to be enabled.
17    RA Mgmnt VLAN                     ena     24
20    VLAN 20                           ena     1-8 24
42    Native Blackhole VLAN             ena     24
4095  Mgmt VLAN                         ena     19
------------------------------------------------------------------

upfast disabled, update 40

Pvst+ compatibility mode enabled

------------------------------------------------------------------
Spanning Tree Group 1: On (STP/PVST+)
VLANs:  1 10 16 17 20 42
Reminder: VLAN 16 needs to be enabled.

Current Root:            Path-Cost  Port Hello MaxAge FwdDel
 6001 00:21:1b:ec:da:00        8      24    2     20     15

Parameters:  Priority  Hello  MaxAge  FwdDel  Aging
              65534      2      20      15     300

Port  Priority   Cost   FastFwd   State       Designated Bridge     Des Port
----  --------   ----   -------- ----------   --------------------- --------
  1          0      0      n     FORWARDING *
  2          0      0      n     FORWARDING *
  3          0      0      n     FORWARDING *
  4          0      0      n     FORWARDING *
  5          0      0      n     FORWARDING *
  6          0      0      n     FORWARDING *
  7          0      0      n     FORWARDING *
  8          0      0      n     FORWARDING *
  9          0      0      n     FORWARDING *
 10          0      0      n     FORWARDING *
 11          0      0      n     FORWARDING *
 12          0      0      n     FORWARDING *
 13          0      0      n     FORWARDING *
 14          0      0      n     FORWARDING *
 15          0      0      n     FORWARDING *
 16          0      0      n     FORWARDING *
 17        128      0!     n     DISABLED
 18        128      0!     n     DISABLED
 20        128      0!     n     DISABLED
 21        128      0!     n     DISABLED
 22        128      0!     n     DISABLED
 23        128      0!     n     DISABLED
 24        128      4!     n     FORWARDING   8001-d4:d7:48:17:45:00    8019
* = STP turned off for this port.
! = Automatic path cost.

------------------------------------------------------------------
Spanning Tree Group 128: Off (STP/PVST+), FDB aging timer 300
VLANs:  4095

Port  Priority   Cost   FastFwd   State       Designated Bridge     Des Port
----  --------   ----   -------- ----------   --------------------- --------
 19          0      0      n     FORWARDING *
* = STP turned off for this port.

------------------------------------------------------------------
MSTP is not on.

VLAN                Name                Status            Ports
----  --------------------------------  ------  -------------------------
1     Default VLAN                      ena     1-18 20-24
Reminder: Port 17 needs to be enabled.
Reminder: Port 18 needs to be enabled.
10    VLAN 10                           ena     9
16    VLAN 16                           dis     1-8
Reminder: VLAN 16 needs to be enabled.
17    RA Mgmnt VLAN                     ena     24
20    VLAN 20                           ena     1-8 24
42    Native Blackhole VLAN             ena     24
4095  Mgmt VLAN                         ena     19

Trunk group 1: Enabled
Protocol - Static
Port State:
 17: STG  1 DOWN
Reminder: Port 17 needs to be enabled.
 18: STG  1 DOWN
Reminder: Port 18 needs to be enabled.


Forwarding database information:
Mac address Aging Time: 300

     MAC address     VLAN  Port  Trnk  State  Permanent
  -----------------  ----  ----  ----  -----
  00:0c:29:5c:13:38    20   5          FWD
  00:0c:29:5d:4d:c1    20   2          FWD
  00:0c:29:75:a1:0d    20   1          FWD
  00:0c:29:eb:93:26    20   3          FWD
  00:15:c5:fd:6d:57     1  24          FWD
  00:15:c5:fd:dc:6a     1  24          FWD
  00:1b:d4:a8:9c:1a     1  24          FWD
  00:1f:29:e7:24:0c  4095  19          FWD
  00:1f:29:e7:24:0d    20  24          FWD
  00:21:1b:ec:da:47    17  24          FWD
  00:21:1b:ec:da:4a    20  24          FWD
  00:21:1b:ec:da:4a  4095  19          FWD
  00:21:5a:f5:cf:28    20   3          FWD
  00:21:5a:f5:dc:ac    20   1          FWD
  00:21:5a:f5:e0:08    20   2          FWD
  00:22:00:1a:36:01    20  24          FWD
  00:50:56:89:6f:4a    20   1          FWD
  00:50:56:89:6f:4a  4095  19          FWD
  00:50:56:91:bb:89    20  24          FWD
  00:50:56:91:bb:89  4095  19          FWD
  00:50:56:93:1c:09    20  24          FWD
  00:50:56:93:1c:09  4095  19          FWD
  00:50:56:93:8c:f2    20  24          FWD
  00:50:56:93:8c:f2  4095  19          FWD
  00:50:56:bc:7b:57    20   4          FWD
  00:50:56:bc:a7:23    20   4          FWD
  00:50:56:bc:a7:23  4095  19          FWD
  00:50:56:bd:e2:31    20   3          FWD
  00:50:56:bd:e2:31  4095  19          FWD
  d4:d7:48:17:45:19     1  24          FWD
  d4:d7:48:17:45:19    10  24          FWD
  d4:d7:48:17:45:19    17  24          FWD
  d4:d7:48:17:45:19    20  24          FWD
  d4:d7:48:17:45:1a  4095  19          FWD

802.1x Operational Info:
------------------------------------------------------------------
System capability : Authenticator
System status     : disabled
Protocol version  : 1
                                  Authenticator    Backend
Port   Auth Mode    Auth Status     PAE State     Auth State
----  ------------  ------------  --------------  ----------
 1    force-auth    unauthorized  initialize      initialize
 2    force-auth    unauthorized  initialize      initialize
 3    force-auth    unauthorized  initialize      initialize
 4    force-auth    unauthorized  initialize      initialize
 5    force-auth    unauthorized  initialize      initialize
 6    force-auth    unauthorized  initialize      initialize
 7    force-auth    unauthorized  initialize      initialize
 8    force-auth    unauthorized  initialize      initialize
 9    force-auth    unauthorized  initialize      initialize
 10   force-auth    unauthorized  initialize      initialize
 11   force-auth    unauthorized  initialize      initialize
 12   force-auth    unauthorized  initialize      initialize
 13   force-auth    unauthorized  initialize      initialize
 14   force-auth    unauthorized  initialize      initialize
 15   force-auth    unauthorized  initialize      initialize
 16   force-auth    unauthorized  initialize      initialize
*17   force-auth    unauthorized  initialize      initialize
*18   force-auth    unauthorized  initialize      initialize
*20   force-auth    unauthorized  initialize      initialize
*21   force-auth    unauthorized  initialize      initialize
*22   force-auth    unauthorized  initialize      initialize
*23   force-auth    unauthorized  initialize      initialize
 24   force-auth    unauthorized  initialize      initialize
------------------------------------------------------------------
* - Port down or disabled


STP uplink fast mode : disabled


>> Layer 2#

iLO: SHOW ALL from command-line

Original configuration:

-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number:  1
OA Role:        Active
OA-BYGGBLADE login:
HP Onboard Administrator booting...
     HP Onboard Administrator

            *     **********
         ****    ***************
      ******    ******************
    ********   *********************
   ********   ***********************
  ********    ************************
 ********           *****          ****
*********   ****    ****    ****   *****
********   ****    *****   *****   *****
*******    ****   *****    ****   ******
*******   ****   *****    ****   *******
******   ****    ****    ****    *******
*****    ****   *****   *****   ********
 ***    ****   *****           ********
  *****************    ****************
   ***************    ***************
    **************   ***************
      ***********    *************
        ********    ************
            ***    *********

[16]
Subsystems init:
[ 9]
Enabling protocols: telnet ssh http ntp

Onboard Administrator's static IP address is: 10.0.209.19


-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number:  1
OA Role:        Active
OA-BYGGBLADE login:

-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number:  1
OA Role:        Active
OA-BYGGBLADE login:

-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number:  1
OA Role:        Active
OA-BYGGBLADE login:
HP Onboard Administrator booting...

Lost Password or Flash Recovery requested
Press L for Lost Password Recovery
Press F for Flash Recovery
Press any other key to reset
Booting in Lost Password Mode...
     HP Onboard Administrator

            *     **********
         ****    ***************
      ******    ******************
    ********   *********************
   ********   ***********************
  ********    ************************
 ********           *****          ****
*********   ****    ****    ****   *****
********   ****    *****   *****   *****
*******    ****   *****    ****   ******
*******   ****   *****    ****   *******
******   ****    ****    ****    *******
*****    ****   *****   *****   ********
 ***    ****   *****           ********
  *****************    ****************
   ***************    ***************
    **************   ***************
      ***********    *************
        ********    ************
            ***    *********


Subsystems init:
[16]  dministrator password reset to:  JUFBSWIX

[ 9]
Enabling protocols: telnet ssh http ntp

Onboard Administrator's static IP address is: 10.0.209.19


-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number:  1
OA Role:        Active
OA-BYGGBLADE login: root
Password:
Login incorrect
OA-BYGGBLADE login: administrator
Password:
Login incorrect
OA-BYGGBLADE login: admin
Password:
Login incorrect


-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number:  1
OA Role:        Active
OA-BYGGBLADE login: Administrator
Password:






HP BladeSystem Onboard Administrator
(C) Copyright 2006-2012 Hewlett-Packard Development Company, L.P.


Type 'HELP' to display a list of valid commands.
Type 'HELP <command>' to display detailed information about a specific command.
Type 'HELP HELP' to display more detailed information about the help system.


OA-BYGGBLADE> help

ADD ASSIGN CLEAR CONNECT DISABLE DISCOVER DOWNLOAD EDIT ENABLE EXIT FORCE
GENERATE HELP HISTORY HPONCFG LOGOUT PING POWEROFF POWERON QUIT REBOOT REMOVE
RESTART SAVE SEND SET SHOW SLEEP TEST UNASSIGN UPDATE UPLOAD


OA-BYGGBLADE> help show

SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }


OA-BYGGBLADE> SET IPCONFIG STATIC 1 192.168.16.16 255.255.255.0

Static IP settings successfully updated.
These setting changes will take effect immediately.

OA-BYGGBLADE> show ip

Invalid Arguments

SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }


OA-BYGGBLADE> show ipconfig

Invalid Arguments

SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }


OA-BYGGBLADE> show ipconfig 1

Invalid Arguments

SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }


OA-BYGGBLADE> help show

SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }


OA-BYGGBLADE> show all

>SHOW HEALTH

Enclosure Health:

        Enclosure: Degraded
        Power Subsystem: Degraded
        Cooling Subsystem: OK

Blade Health:

Bay Status               Problem                Corrective Action
--- -------------------- ---------------------- --------------------------------
  1 Absent
  2 Error                Missing Device         This device needs a partner
                                                blade in order to function
                                                properly. The partner device
                                                must be installed adjacent to
                                                this device and within the same
                                                partition indicated by the
                                                dividers.

  3 Absent
  4 Absent
  5 Absent
  6 Absent
  7 Absent
  8 Absent

Interconnect Health:

Bay Status               Problem                Corrective Action
--- -------------------- ---------------------- --------------------------------
  1 OK
  2 OK
  3 Absent
  4 Absent

Power Supply Health:

Bay Status               Problem                Corrective Action
--- -------------------- ---------------------- --------------------------------
  1 Error                Power Cord             The pwr cord of power supplies
                                                is unplugged or loose. Please
                                                plug in all pwr cords to the
                                                available power supplies.

  2 OK
  3 Absent
  4 Error                Power Cord             The pwr cord of power supplies
                                                is unplugged or loose. Please
                                                plug in all pwr cords to the
                                                available power supplies.

  5 OK
  6 Absent

Fan Health:

Bay Status               Problem                Corrective Action
--- -------------------- ---------------------- --------------------------------
  1 OK
  2 OK
  3 OK
  4 OK
  5 OK
  6 OK

Onboard Administrator Health:

Bay Status               Problem                Corrective Action
--- -------------------- ---------------------- --------------------------------
  1 OK

>SHOW CONFIG
#Script Generated by Administrator
#Generated on: Thu Oct 15 09:16:29 2015


#Set Enclosure Time
SET TIMEZONE Etc/GMT+1
#SET DATE MMDDhhmm{{CC}YY}

#Set Enclosure Information
SET ENCLOSURE ASSET TAG ""
SET ENCLOSURE NAME "CZC8383004"
SET RACK NAME "ByggBlade"


SET POWER MODE REDUNDANT
SET POWER SAVINGS ON
#Power limit must be within the range of 950-8750
SET POWER LIMIT OFF
#Enclosure Dynamic Power Cap must be within the range of 820-1459
#Derated Circuit Capacity must be within the range of 820-1459
#Rated Circuit Capacity must be within the range of 820-1459
SET ENCLOSURE POWER_CAP OFF
SET ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE None


#Set PowerDelay Information
SET INTERCONNECT POWERDELAY 1 0
SET INTERCONNECT POWERDELAY 2 0
SET INTERCONNECT POWERDELAY 3 0
SET INTERCONNECT POWERDELAY 4 0
SET SERVER POWERDELAY 1 0
SET SERVER POWERDELAY 2 0
SET SERVER POWERDELAY 3 0
SET SERVER POWERDELAY 4 0
SET SERVER POWERDELAY 5 0
SET SERVER POWERDELAY 6 0
SET SERVER POWERDELAY 7 0
SET SERVER POWERDELAY 8 0
SET SERVER POWERDELAY 1A 0
SET SERVER POWERDELAY 2A 0
SET SERVER POWERDELAY 3A 0
SET SERVER POWERDELAY 4A 0
SET SERVER POWERDELAY 5A 0
SET SERVER POWERDELAY 6A 0
SET SERVER POWERDELAY 7A 0
SET SERVER POWERDELAY 8A 0
SET SERVER POWERDELAY 1B 0
SET SERVER POWERDELAY 2B 0
SET SERVER POWERDELAY 3B 0
SET SERVER POWERDELAY 4B 0
SET SERVER POWERDELAY 5B 0
SET SERVER POWERDELAY 6B 0
SET SERVER POWERDELAY 7B 0
SET SERVER POWERDELAY 8B 0


#Configure Protocols
ENABLE WEB
ENABLE SECURESH
ENABLE TELNET
ENABLE XMLREPLY
DISABLE GUI_LOGIN_DETAIL
ENABLE ACTIVE_HEALTH_SYSTEM

#Configure Alertmail
SET ALERTMAIL SMTPSERVER 0.0.0.0
DISABLE ALERTMAIL

#Configure Trusted Hosts
#REMOVE TRUSTED HOST ALL
DISABLE TRUSTED HOST

#Configure NTP
SET NTP PRIMARY 192.36.144.22
SET NTP SECONDARY 192.36.143.151
SET NTP POLL 720
ENABLE NTP


#Set SNMP Information
SET SNMP CONTACT ""
SET SNMP LOCATION ""
SET SNMP COMMUNITY READ "public"
SET SNMP COMMUNITY WRITE ""
DISABLE SNMP


#Set Remote Syslog Information
SET REMOTE SYSLOG SERVER ""
SET REMOTE SYSLOG PORT 514
DISABLE SYSLOG REMOTE


#Set Enclosure Bay IP Addressing (EBIPA) Information for Device Bays
#NOTE: SET EBIPA commands are only valid for OA v3.00 and later
SET EBIPA SERVER 10.0.209.83 255.255.255.0 1
SET EBIPA SERVER GATEWAY 10.0.209.1 1
SET EBIPA SERVER DOMAIN "byggtjanst.local" 1
ADD EBIPA SERVER DNS 10.0.209.30 1
ADD EBIPA SERVER DNS 10.0.209.31 1
ENABLE EBIPA SERVER 1
SET EBIPA SERVER NONE NONE 1A
SET EBIPA SERVER GATEWAY 10.0.209.1 1A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 1A
ADD EBIPA SERVER DNS 10.0.209.30 1A
ADD EBIPA SERVER DNS 10.0.209.31 1A
DISABLE EBIPA SERVER 1A
SET EBIPA SERVER NONE NONE 1B
SET EBIPA SERVER GATEWAY 10.0.209.1 1B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 1B
ADD EBIPA SERVER DNS 10.0.209.30 1B
ADD EBIPA SERVER DNS 10.0.209.31 1B
DISABLE EBIPA SERVER 1B
SET EBIPA SERVER NONE NONE 2
SET EBIPA SERVER GATEWAY 10.0.209.1 2
SET EBIPA SERVER DOMAIN "byggtjanst.local" 2
ADD EBIPA SERVER DNS 10.0.209.30 2
ADD EBIPA SERVER DNS 10.0.209.31 2
DISABLE EBIPA SERVER 2
SET EBIPA SERVER NONE NONE 2A
SET EBIPA SERVER GATEWAY 10.0.209.1 2A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 2A
ADD EBIPA SERVER DNS 10.0.209.30 2A
ADD EBIPA SERVER DNS 10.0.209.31 2A
DISABLE EBIPA SERVER 2A
SET EBIPA SERVER NONE NONE 2B
SET EBIPA SERVER GATEWAY 10.0.209.1 2B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 2B
ADD EBIPA SERVER DNS 10.0.209.30 2B
ADD EBIPA SERVER DNS 10.0.209.31 2B
DISABLE EBIPA SERVER 2B
SET EBIPA SERVER NONE NONE 3
SET EBIPA SERVER GATEWAY 10.0.209.1 3
SET EBIPA SERVER DOMAIN "byggtjanst.local" 3
ADD EBIPA SERVER DNS 10.0.209.30 3
ADD EBIPA SERVER DNS 10.0.209.31 3
DISABLE EBIPA SERVER 3
SET EBIPA SERVER NONE NONE 3A
SET EBIPA SERVER GATEWAY 10.0.209.1 3A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 3A
ADD EBIPA SERVER DNS 10.0.209.30 3A
ADD EBIPA SERVER DNS 10.0.209.31 3A
DISABLE EBIPA SERVER 3A
SET EBIPA SERVER NONE NONE 3B
SET EBIPA SERVER GATEWAY 10.0.209.1 3B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 3B
ADD EBIPA SERVER DNS 10.0.209.30 3B
ADD EBIPA SERVER DNS 10.0.209.31 3B
DISABLE EBIPA SERVER 3B
SET EBIPA SERVER NONE NONE 4
SET EBIPA SERVER GATEWAY 10.0.209.1 4
SET EBIPA SERVER DOMAIN "byggtjanst.local" 4
ADD EBIPA SERVER DNS 10.0.209.30 4
ADD EBIPA SERVER DNS 10.0.209.31 4
DISABLE EBIPA SERVER 4
SET EBIPA SERVER NONE NONE 4A
SET EBIPA SERVER GATEWAY 10.0.209.1 4A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 4A
ADD EBIPA SERVER DNS 10.0.209.30 4A
ADD EBIPA SERVER DNS 10.0.209.31 4A
DISABLE EBIPA SERVER 4A
SET EBIPA SERVER NONE NONE 4B
SET EBIPA SERVER GATEWAY 10.0.209.1 4B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 4B
ADD EBIPA SERVER DNS 10.0.209.30 4B
ADD EBIPA SERVER DNS 10.0.209.31 4B
DISABLE EBIPA SERVER 4B
SET EBIPA SERVER 10.0.209.85 255.255.255.0 5
SET EBIPA SERVER GATEWAY 10.0.209.1 5
SET EBIPA SERVER DOMAIN "byggtjanst.local" 5
ADD EBIPA SERVER DNS 10.0.209.30 5
ADD EBIPA SERVER DNS 10.0.209.31 5
ENABLE EBIPA SERVER 5
SET EBIPA SERVER NONE NONE 5A
SET EBIPA SERVER GATEWAY 10.0.209.1 5A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 5A
ADD EBIPA SERVER DNS 10.0.209.30 5A
ADD EBIPA SERVER DNS 10.0.209.31 5A
DISABLE EBIPA SERVER 5A
SET EBIPA SERVER NONE NONE 5B
SET EBIPA SERVER GATEWAY 10.0.209.1 5B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 5B
ADD EBIPA SERVER DNS 10.0.209.30 5B
ADD EBIPA SERVER DNS 10.0.209.31 5B
DISABLE EBIPA SERVER 5B
SET EBIPA SERVER NONE NONE 6
SET EBIPA SERVER GATEWAY 10.0.209.1 6
SET EBIPA SERVER DOMAIN "byggtjanst.local" 6
ADD EBIPA SERVER DNS 10.0.209.30 6
ADD EBIPA SERVER DNS 10.0.209.31 6
DISABLE EBIPA SERVER 6
SET EBIPA SERVER NONE NONE 6A
SET EBIPA SERVER GATEWAY 10.0.209.1 6A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 6A
ADD EBIPA SERVER DNS 10.0.209.30 6A
ADD EBIPA SERVER DNS 10.0.209.31 6A
DISABLE EBIPA SERVER 6A
SET EBIPA SERVER NONE NONE 6B
SET EBIPA SERVER GATEWAY 10.0.209.1 6B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 6B
ADD EBIPA SERVER DNS 10.0.209.30 6B
ADD EBIPA SERVER DNS 10.0.209.31 6B
DISABLE EBIPA SERVER 6B
SET EBIPA SERVER NONE NONE 7
SET EBIPA SERVER GATEWAY 10.0.209.1 7
SET EBIPA SERVER DOMAIN "byggtjanst.local" 7
ADD EBIPA SERVER DNS 10.0.209.30 7
ADD EBIPA SERVER DNS 10.0.209.31 7
DISABLE EBIPA SERVER 7
SET EBIPA SERVER NONE NONE 7A
SET EBIPA SERVER GATEWAY 10.0.209.1 7A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 7A
ADD EBIPA SERVER DNS 10.0.209.30 7A
ADD EBIPA SERVER DNS 10.0.209.31 7A
DISABLE EBIPA SERVER 7A
SET EBIPA SERVER NONE NONE 7B
SET EBIPA SERVER GATEWAY 10.0.209.1 7B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 7B
ADD EBIPA SERVER DNS 10.0.209.30 7B
ADD EBIPA SERVER DNS 10.0.209.31 7B
DISABLE EBIPA SERVER 7B
SET EBIPA SERVER NONE NONE 8
SET EBIPA SERVER GATEWAY 10.0.209.1 8
SET EBIPA SERVER DOMAIN "byggtjanst.local" 8
ADD EBIPA SERVER DNS 10.0.209.30 8
ADD EBIPA SERVER DNS 10.0.209.31 8
DISABLE EBIPA SERVER 8
SET EBIPA SERVER NONE NONE 8A
SET EBIPA SERVER GATEWAY 10.0.209.1 8A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 8A
ADD EBIPA SERVER DNS 10.0.209.30 8A
ADD EBIPA SERVER DNS 10.0.209.31 8A
DISABLE EBIPA SERVER 8A
SET EBIPA SERVER NONE NONE 8B
SET EBIPA SERVER GATEWAY 10.0.209.1 8B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 8B
ADD EBIPA SERVER DNS 10.0.209.30 8B
ADD EBIPA SERVER DNS 10.0.209.31 8B
DISABLE EBIPA SERVER 8B


#Set Enclosure Bay IP Addressing (EBIPA) Information for Interconnect Bays
#NOTE: SET EBIPA commands are only valid for OA v3.00 and later
SET EBIPA INTERCONNECT 10.0.209.68 255.255.255.0 1
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 1
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 1
ADD EBIPA INTERCONNECT DNS 10.0.209.30 1
ADD EBIPA INTERCONNECT DNS 10.0.209.31 1
SET EBIPA INTERCONNECT NTP PRIMARY NONE 1
SET EBIPA INTERCONNECT NTP SECONDARY NONE 1
ENABLE EBIPA INTERCONNECT 1
SET EBIPA INTERCONNECT NONE NONE 2
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 2
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 2
ADD EBIPA INTERCONNECT DNS 10.0.209.30 2
ADD EBIPA INTERCONNECT DNS 10.0.209.31 2
SET EBIPA INTERCONNECT NTP PRIMARY NONE 2
SET EBIPA INTERCONNECT NTP SECONDARY NONE 2
DISABLE EBIPA INTERCONNECT 2
SET EBIPA INTERCONNECT NONE NONE 3
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 3
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 3
ADD EBIPA INTERCONNECT DNS 10.0.209.30 3
ADD EBIPA INTERCONNECT DNS 10.0.209.31 3
SET EBIPA INTERCONNECT NTP PRIMARY NONE 3
SET EBIPA INTERCONNECT NTP SECONDARY NONE 3
DISABLE EBIPA INTERCONNECT 3
SET EBIPA INTERCONNECT NONE NONE 4
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 4
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 4
ADD EBIPA INTERCONNECT DNS 10.0.209.30 4
ADD EBIPA INTERCONNECT DNS 10.0.209.31 4
SET EBIPA INTERCONNECT NTP PRIMARY NONE 4
SET EBIPA INTERCONNECT NTP SECONDARY NONE 4
DISABLE EBIPA INTERCONNECT 4
SAVE EBIPA

#Uncomment following line to remove all user accounts currently in the system
#REMOVE USERS ALL

#Create Users
ADD USER "Administrator"
SET USER CONTACT "Administrator" ""
SET USER FULLNAME "Administrator" "System Administrator"
SET USER ACCESS "Administrator" ADMINISTRATOR
ASSIGN SERVER 1,2,3,4,5,6,7,8,1A,2A,3A,4A,5A,6A,7A,8A,1B,2B,3B,4B,5B,6B,7B,8B "Administrator"
ASSIGN INTERCONNECT 1,2,3,4 "Administrator"
ASSIGN OA "Administrator"
ENABLE USER "Administrator"

#Password Settings
DISABLE STRONG PASSWORDS
SET MINIMUM PASSWORD LENGTH 3

#Session Timeout Settings
SET SESSION TIMEOUT 0

#Set LDAP Information
SET LDAP SERVER
SET LDAP PORT 0
SET LDAP NAME MAP OFF
SET LDAP SEARCH 1 ""
SET LDAP SEARCH 2 ""
SET LDAP SEARCH 3 ""
SET LDAP SEARCH 4 ""
SET LDAP SEARCH 5 ""
SET LDAP SEARCH 6 ""

#Uncomment following line to remove all LDAP accounts currently in the system
#REMOVE LDAP GROUP ALL
DISABLE LDAP


#Set SSO TRUST MODE
SET SSO TRUST Disabled
SET SERIAL BAUD 9600

#Set VLAN Information
SET VLAN FACTORY
SET VLAN DEFAULT 1
EDIT VLAN 1 "Default"
SET VLAN SERVER 1 1
SET VLAN SERVER 1 2
SET VLAN SERVER 1 3
SET VLAN SERVER 1 4
SET VLAN SERVER 1 5
SET VLAN SERVER 1 6
SET VLAN SERVER 1 7
SET VLAN SERVER 1 8
SET VLAN INTERCONNECT 1 1
SET VLAN INTERCONNECT 1 2
SET VLAN INTERCONNECT 1 3
SET VLAN INTERCONNECT 1 4
SET VLAN OA 1
DISABLE VLAN
SAVE VLAN

#Set URB Information
DISABLE URB
SET URB URL ""
SET URB PROXY URL ""
SET URB INTERVAL DAILY 0

SET SOLUTIONSID "0000000000000000"

#Set Login Banner Text Information
CLEAR LOGIN_BANNER_TEXT
DISABLE LOGIN_BANNER

#Set Firmware Management information
DISABLE FIRMWARE MANAGEMENT
SET FIRMWARE MANAGEMENT POLICY MANUAL
SET FIRMWARE MANAGEMENT POWER OFF
SET FIRMWARE MANAGEMENT SCHEDULE NONE
SET FIRWMARE MANAGEMENT BAYS_TO_INCLUDE SERVER NONE

#Set Remote Support Information
DISABLE REMOTE_SUPPORT


#Set Network Information
#NOTE: Setting your network information through a script while
#      remotely accessing the server could drop your connection.
#      If your connection is dropped this script may not execute to conclusion.
SET OA NAME 1 OA-BYGGBLADE
SET IPCONFIG STATIC 1 192.168.16.16 255.255.255.0 0.0.0.0 0.0.0.0 0.0.0.0
SET NIC AUTO 1
DISABLE ROUTER ADVERTISEMENTS
DISABLE DHCPV6
DISABLE IPV6

>SHOW DATE

        Date: 2015-10-15T09:16:43-01:00
        Time Zone: Etc/GMT+1
>SHOW DISPLAY EVENT

Display Events is set to OFF.
>SHOW EBIPA

EBIPA Device Server Settings
Bay Enabled EBIPA/Current   Netmask         Gateway         DNS             Domain
--- ------- --------------- --------------- --------------- --------------- ------
  1   Yes   10.0.209.83     255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 1A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 1B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  2    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
            0.0.0.0                                         10.0.209.31
 2A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 2B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  3    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 3A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 3B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  4    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 4A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 4B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  5   Yes   10.0.209.85     255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 5A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 5B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  6    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 6A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 6B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  7    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 7A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 7B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
  8    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 8A    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31
 8B    No                   255.255.255.0   10.0.209.1      10.0.209.30     byggtjanst.local
                                                            10.0.209.31

EBIPA Device Interconnect Settings
Bay Enabled EBIPA/Current   Netmask         Gateway         DNS             NTP             Domain
--- ------- --------------- --------------- --------------- --------------- --------------- ------
  1   Yes   10.0.209.68     255.255.255.0   10.0.209.1      10.0.209.30                     byggtjanst.local
            10.0.209.68                                     10.0.209.31         
  2    No                   255.255.255.0   10.0.209.1      10.0.209.30                     byggtjanst.local
            10.0.209.41                                     10.0.209.31         
  3    No                   255.255.255.0   10.0.209.1      10.0.209.30                     byggtjanst.local
                                                            10.0.209.31         
  4    No                   255.255.255.0   10.0.209.1      10.0.209.30                     byggtjanst.local
                                                            10.0.209.31         

>SHOW ENCLOSURE FAN ALL
Fan #1 information:
        Status: OK
        Speed: 27 percent of Maximum speed
        Maximum speed: 18000
        Minimum speed: 10
        Power consumed: 7
        Product Name: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001
        Version: 2.9
        Diagnostic Status:
                Internal Data        OK
                Location             OK
                Device Failure       OK
                Device Degraded      OK
                Missing Device       OK
Fan #2 information:
        Status: OK
        Speed: 27 percent of Maximum speed
        Maximum speed: 18000
        Minimum speed: 10
        Power consumed: 7
        Product Name: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001
        Version: 2.9
        Diagnostic Status:
                Internal Data        OK
                Location             OK
                Device Failure       OK
                Device Degraded      OK
                Missing Device       OK
Fan #3 information:
        Status: OK
        Speed: 27 percent of Maximum speed
        Maximum speed: 18000
        Minimum speed: 10
        Power consumed: 6
        Product Name: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001
        Version: 2.9
        Diagnostic Status:
                Internal Data        OK
                Location             OK
                Device Failure       OK
                Device Degraded      OK
                Missing Device       OK
Fan #4 information:
        Status: OK
        Speed: 27 percent of Maximum speed
        Maximum speed: 18000
        Minimum speed: 10
        Power consumed: 7
        Product Name: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001
        Version: 2.9
        Diagnostic Status:
                Internal Data        OK
                Location             OK
                Device Failure       OK
                Device Degraded      OK
                Missing Device       OK
Fan #5 information:
        Status: OK
        Speed: 27 percent of Maximum speed
        Maximum speed: 18000
        Minimum speed: 10
        Power consumed: 7
        Product Name: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001
        Version: 2.9
        Diagnostic Status:
                Internal Data        OK
                Location             OK
                Device Failure       OK
                Device Degraded      OK
                Missing Device       OK
Fan #6 information:
        Status: OK
        Speed: 27 percent of Maximum speed
        Maximum speed: 18000
        Minimum speed: 10
        Power consumed: 6
        Product Name: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001
        Version: 2.9
        Diagnostic Status:
                Internal Data        OK
                Location             OK
                Device Failure       OK
                Device Degraded      OK
                Missing Device       OK

>SHOW ENCLOSURE INFO

Enclosure Information:
        Enclosure Name: CZC8383004
        Enclosure Type: BladeSystem c3000 Enclosure
        Part Number: 437502-B21
        Serial Number: CZC8383004
        UUID: 09CZC8383004
        Asset Tag:
        Midplane Spare Part Number: 441829-001
        Solutions ID: 0000000000000000
        Power Distribution Unit:
                [No PDU is present on c3000 enclosures]
        Onboard Administrator Tray Information:
                [No Tray Information is present on c3000 enclosures]

>SHOW ENCLOSURE LCD

        Status      :   OK
        Display     :   On
        Name        :   BladeSystem c3000 Insight Display
        Spare Part# :   441831-001
        Manufacturer:   HP
        Fw Version  :   2.2.2

        Diagnostic Status:
                Internal Data        OK

>SHOW ENCLOSURE POWER_CAP

Enclosure Dynamic Power Cap:                               Disabled
Derated Circuit Capacity:                                  Disabled
Rated Circuit Capacity:                                    Disabled
Allowable Enclosure Dynamic Power Cap:            820 -  1459 Watts AC
Allowable Derated Circuit Capacity:               820 -  1459 Watts AC
Allowable Rated Circuit Capacity:                 820 -  1459 Watts AC

>SHOW ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE

Bays opted out: None
>SHOW ENCLOSURE POWERSUPPLY ALL
Power Supply #1 Information:
        Status: Failed
        AC Input Status: Failed
        Capacity: 0 Watts
        Current Power Output: 0 Watts
        Serial Number: 531290A4DW650P
        Product Name: HP PROLIANT SERVER PS
        Part Number: 437572-B21
        Spare Part Number: 441830-001
        Product Ver: 01
        Diagnostic Status:
                Device Failure       Failed
                Power Cord           Failed
Power Supply #2 Information:
        Status: OK
        AC Input Status: OK
        Capacity: 1200 Watts
        Current Power Output: 30 Watts
        Serial Number: 531290A4DW96UL
        Product Name: HP PROLIANT SERVER PS
        Part Number: 437572-B21
        Spare Part Number: 441830-001
        Product Ver: 01
        Diagnostic Status:
                Internal Data        OK
                Device Failure       OK
                Power Cord           OK
Power Supply #3 Information:
        Status: Power Supply Bay Empty
Power Supply #4 Information:
        Status: Failed
        AC Input Status: Failed
        Capacity: 0 Watts
        Current Power Output: 0 Watts
        Serial Number: 531290A4DWJ1NR
        Product Name: HP PROLIANT SERVER PS
        Part Number: 437572-B21
        Spare Part Number: 441830-001
        Product Ver: 01
        Diagnostic Status:
                Device Failure       Failed
                Power Cord           Failed
Power Supply #5 Information:
        Status: OK
        AC Input Status: OK
        Capacity: 1200 Watts
        Current Power Output: 38 Watts
        Serial Number: 531290A4DW96UN
        Product Name: HP PROLIANT SERVER PS
        Part Number: 437572-B21
        Spare Part Number: 441830-001
        Product Ver: 01
        Diagnostic Status:
                Internal Data        OK
                Device Failure       OK
                Power Cord           OK
Power Supply #6 Information:
        Status: Power Supply Bay Empty

>SHOW ENCLOSURE POWER_SUMMARY

Enclosure Bay Output Allocation:
Bay               Power Allocated (Watts DC)
-------------     --------------------------
Devices                      0
Interconnects          +    60
Fans                   +   480
                       -------
                       =   540

Enclosure Output Power Summary:
Enclosure             Watts DC
----------------      --------
Power Capacity            1200
Power Allocation       -   540
Power Available        =   660

Enclosure Input Power Summary:
Enclosure              Watts AC
-----------------      --------
Present Power              181
Max Input Power           1459
Dynamic Power Cap      Not Set
Power Limit            Not Set

Device Bay Power Summary:
                          Power Allocated
Bay  Name                 (Watts DC)
---  -------------------  ---------------
  2  HP StorageWorks SB4           0
                              -------
                              =     0

Interconnect Bay Power Summary:
Bay  Name                              Power Allocated (Watts DC)
---  --------------------------------  --------------------------
  1  GbE2c Ethernet Blade Switch                     25
  2  Brocade 4/12 SAN Switch for HP                  35
                                                -------
                                                =    60

Fan Power Summary:
Total Fans        Fan Rule          Present Power   Power Allocated
(Number of Fans)  (Number of Fans)  (Watts DC)      (Watts DC)
----------------  ----------------  --------------  ---------------
        6                 4                 40             480

>SHOW ENCLOSURE STATUS

Enclosure:
        Status: Degraded
        Unit Identification LED: Off
        Diagnostic Status:
                Internal Data        OK

Onboard Administrator:
        Status: OK

Power Subsystem:
        Status: Degraded
        Power Mode: Redundant
        Redundancy State: Redundant
        Power Capacity: 1200 Watts DC
        Power Available:  660 Watts DC
        Present Power:  181 Watts AC

Cooling Subsystem:
        Status: OK
        Fans Good/Wanted/Needed: 6/4/3
        Fan 1:  5001 RPM (28%)
        Fan 2:  4999 RPM (28%)
        Fan 3:  5001 RPM (28%)
        Fan 4:  5000 RPM (28%)
        Fan 5:  5000 RPM (28%)
        Fan 6:  5000 RPM (28%)

>SHOW ENCLOSURE TEMP

Locale                 Bay # Temp Status      Temp    Caution   Critical
---------------------- ----- -----------    --------  -------   --------
Enclosure                    N/A            25C/ 77F    ---       ---
Onboard Administrator    1   OK             25C/ 77F    75C       80C
Blade Bay                2   N/A             0C/ 32F    45C       60C
Interconnect Module      1   OK               ----      ---       ---
Interconnect Module      2   OK               ----      ---       ---
>SHOW FIPS MODE

FIPS Mode is Off

>SHOW OA INFO

Onboard Administrator #1 information:
        Product Name  : BladeSystem c3000 Onboard Administrator
        Part Number   : 448589-B21
        Spare Part No.: 441832-001
        Serial Number : P3059%%9VW909F
        UUID          : 18P3059%%9VW909F
        Manufacturer  : HP
        Firmware Ver. : 3.71 Dec 07 2012
        Hw Board Type : 1
        Hw Version    : %%
        Loader Version: U-Boot 1.1.1 (Aug 21 2007 - 09:51:44)
        Serial Port:
            Baud Rate   : 9600
            Parity      : None
            Data bits   : 8
            Stop bits   : 1
            Flow control: None


>SHOW OA NETWORK

Enclosure Network Settings:

        - - - - - IPv6 Information - - - - -
        IPv6: Disabled
        DHCPv6: Disabled
        Router Advertisement: Disabled

Onboard Administrator #1 Network Information:
        Name: OA-BYGGBLADE

        - - - - - IPv4 Information - - - - -
        DHCP: Disabled
        IPv4 Address: 192.168.16.16
        Netmask: 255.255.255.0
        Gateway Address: 0.0.0.0

        - - - - - IPv6 Information - - - - -
        Static Address: Not Set
        Static IPv6 DNS 1: Not Set
        Static IPv6 DNS 2: Not Set

        - - - - - General Information - - - - -
        Active DNS Addresses:
                Primary:         Not Set
                Secondary:       Not Set
                Tertiary:        Not Set

        MAC Address: 00:1F:29:E7:24:0D
        Link Settings: Auto-Negotiation, 10 Mbps, Half Duplex
        Link Status: Not Active
        Enclosure IP Mode: Not Supported

>SHOW OA STATUS ALL

Onboard Administrator #1 Status:
        Name:   OA-BYGGBLADE
        Role:   Active
        UID:    Off
        Status: OK

>SHOW OA UPTIME ALL

Onboard Administrator #1:
        Role     : Active
        Uptime   : 0 days, 0 hours, 24 min
        CPU Load : 0.12, 0.20, 0.18

>SHOW OA CERTIFICATE

Onboard Administrator #1 Certificate Information:
        Issued by: CZC8383004
        Valid from: 2006-09-06T00:18:19Z
        Valid until: 2016-09-03T00:18:19Z
        Serial Number: C8:88:B2:68:A1:8E:2B:CE
        Version: 1
        MD5 Fingerprint: 09:2B:D0:D4:70:8E:5F:C0:71:D1:B7:37:C9:D2:8A:97
        SHA1 Fingerprint: 54:CE:1D:C6:B0:3E:02:CD:06:98:88:BC:93:87:B7:CA:2E:46:7C:29
        Public Key: RSA (1024 Bits)

        Subject:
        Common Name (CN): CZC8383004
        Country (C):
        State or Province (ST):
        City or Locality (L):
        Organization Name (0): Hewlett-Packard
        Organizational Unit: Onboard Administrator

>SHOW SYSLOG OA 1

Mar 10 13:44:40  OA: Blade 3 is reporting nominal health status.
Mar 10 13:44:40  OA: Blade in bay #3 status changed to OK
Mar 10 13:44:52  Kernel: usb 2-2: device descriptor read/64, error -71
Mar 10 13:44:54  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Mar 10 13:44:56  OA: Internal health status of interconnect in bay 2 changed to OK
Mar 10 13:44:59  OA: Device 3 power delayed until device settings are updated.
Mar 10 13:45:12  OA: Blade removed from bay 3
Mar 10 13:47:41  OA: Blade in bay #6 status changed to OK
Mar 10 13:51:43  OA: Blade in bay #6 status changed to OK
Mar 26 09:00:39  OA: Administrator logged into the Onboard Administrator from 10.0.209.187
Mar 26 09:14:16  OA: Blade in bay 6 has been powered down
Mar 26 09:14:21  OA: Blade removed from bay 6
Mar 26 11:54:05  OA: Administrator logged into the Onboard Administrator from 10.0.209.187
Mar 28 09:10:31  OA: Administrator logged into the Onboard Administrator from 10.0.209.136
Mar 28 09:26:27  OA: Administrator logged into the Onboard Administrator from 10.0.209.136
Mar 28 10:36:18  OA: Administrator logged into the Onboard Administrator from 10.0.209.135
Mar 31 06:32:25  OA: Authentication failure for user admin from 10.0.209.204, requesting web service
Mar 31 06:32:41  OA: Administrator logged into the Onboard Administrator from 10.0.209.204
Apr 15 16:27:39  OA: Blade in bay 1 has been powered down
Apr 15 16:27:39  OA: Blade in bay 2 has been powered down
Apr 15 16:27:48  OA: Blade 2 found a partner device.
Apr 15 16:27:48  OA: Blade 1 found a partner device.
Apr 15 16:27:48  OA: Blade 2 properly partners with its neighbor.
Apr 15 16:27:48  OA: Blade 1 properly partners with its neighbor.
Apr 15 16:27:48  OA: Blade in bay 2 has been powered on
Apr 15 16:27:49  OA: Blade in bay #2 status changed from Degraded to OK
Apr 15 19:01:53  OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 640W DC, Present Power: 76W AC.
Apr 15 19:01:53  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Apr 15 19:02:22  OA: PS Status Changed: Bay #1 From: unknown To: failed
Apr 15 19:02:22  OA: PS Status Changed: Bay #2 From: unknown To: failed
Apr 15 19:03:10  NTP: Failed to update time/date using NTP
Apr 15 19:50:33  Kernel: Network link is down
Apr 15 22:09:17  Kernel: Network link is up at 100Mbps - Full Duplex
Apr 15 22:09:21  OA: Time zone changed to GMT+1
Apr 15 22:09:23  OA: Blade in bay #1 status changed to Unknown
Apr 15 22:09:23  OA: Blade in bay #2 status changed to Unknown
Apr 15 22:09:23  OA: LCD Status is: OK.
Apr 15 22:09:24  OA: Blade in bay #2 status changed to OK
Apr 15 22:09:24  OA: Blade 1 is reporting nominal health status.
Apr 15 22:09:24  OA: Blade in bay #1 status changed to OK
Apr 15 22:09:27  Enclosure-Link: Service started
Apr 15 22:09:27  OA: Device 2 power delayed during device discovery.
Apr 15 22:09:28  NTP: Failed to update time/date using NTP
Apr 15 22:09:32  OA: Device 1 power delayed during device discovery.
Apr 15 22:09:33  Enclosure-Link: Initial topology scan completed successfully
Apr 15 22:09:37  OA: Onboard Administrator booted successfully
Apr 15 22:09:44  OA: HTTP server is up
Apr 15 22:10:09  NTP: Successfully updated time/date using NTP
Apr 15 22:10:16  OA: VLAN is disabled
Apr 15 22:10:25  OA: Blade in bay #1 status changed to OK
Apr 15 22:10:28  OA: Blade 2 found a partner device.
Apr 15 22:10:28  OA: Blade 1 found a partner device.
Apr 15 22:10:28  OA: Blade 2 properly partners with its neighbor.
Apr 15 22:10:28  OA: Blade 1 properly partners with its neighbor.
Apr 15 22:10:28  OA: Blade 2 is properly cooled.
Apr 15 22:10:28  OA: Blade in bay 2 has been powered on
Apr 15 22:10:28  OA: Blade 2 is reporting nominal health status.
Apr 15 22:10:41  OA: Blade 1 is properly cooled.
Apr 15 22:10:41  OA: Blade in bay 1 has been powered on
Apr 15 22:11:12  OA: Internal health status of interconnect in bay 2 changed to OK
May 12 12:03:37  Kernel: hub 4-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
May 12 12:03:40  Kernel: hub 4-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
May 12 12:03:43  Kernel: hub 4-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
May 12 12:03:46  Kernel: hub 4-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Jul 27 10:22:00  OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 956W DC, Present Power: 250W AC.
Jul 27 10:22:00  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Jul 27 10:22:00  OA: PS Subsystem N + N Redundancy - REPAIRED
Jul 27 10:22:00  OA: Enclosure Status changed from Degraded to OK.
Jul 31 20:07:52  Kernel: usb 2-2: device descriptor read/64, error -110
Jul 31 20:07:54  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Jul 31 20:07:55  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Jul 31 20:07:56  Kernel: usb 2-2: device descriptor read/8, error -71
Jul 31 20:07:56  Kernel: usb 2-2: device descriptor read/8, error -71
Jul 31 20:07:56  Kernel: usb 2-2: device not accepting address 7, error -71
Aug  6 04:44:07  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  6 04:44:12  Kernel: usb 2-2: device descriptor read/64, error -71
Aug  6 04:44:13  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Aug  6 04:44:14  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  6 04:44:14  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  6 04:44:17  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  6 04:44:17  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  6 23:11:54  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  6 23:12:10  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  6 23:12:13  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  6 23:12:28  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  6 23:12:33  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  6 23:12:34  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  6 23:12:37  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  6 23:12:37  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  7 03:25:01  OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 956W DC, Present Power: 250W AC.
Aug  7 03:25:01  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Aug  7 03:25:08  OA: PS Subsystem N + N Redundancy - REPAIRED
Aug  7 03:25:08  OA: Enclosure Status changed from Degraded to OK.
Aug  7 03:52:08  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  7 03:52:23  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  7 03:52:26  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  7 03:52:37  Kernel: usb 2-2: device descriptor read/64, error -71
Aug  7 03:52:42  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  7 03:52:47  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  7 03:52:52  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  7 03:52:56  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  8 04:37:49  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  8 04:38:04  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  8 04:38:08  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  8 04:38:23  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  8 04:38:28  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  8 04:38:33  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  8 04:38:39  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  8 04:38:44  Kernel: usb 2-2: device descriptor read/8, error -110
Aug  9 05:54:25  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Aug  9 05:54:28  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Aug  9 05:54:31  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  9 05:54:35  Kernel: hub 2-0:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
Aug  9 05:54:38  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  9 05:54:42  Kernel: usb 2-2: device descriptor read/8, error -71
Aug  9 05:54:43  Kernel: usb 2-2: device not accepting address 29, error -71
Aug  9 06:56:39  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  9 06:56:44  Kernel: usb 2-2: device descriptor read/64, error -110
Aug  9 06:56:54  Kernel: usb 2-2: device descriptor read/64, error -71
Aug  9 06:56:59  Kernel: usb 2-2: device descriptor read/64, error -110
Sep 21 12:52:50  OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 956W DC, Present Power: 235W AC.
Sep 21 12:52:50  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Sep 21 12:52:57  OA: PS Subsystem N + N Redundancy - REPAIRED
Sep 21 12:52:57  OA: Enclosure Status changed from Degraded to OK.
Oct  9 13:23:42  OA: Authentication failure for user admin from 10.0.209.153, requesting web service
Oct  9 13:23:55  OA: Administrator logged into the Onboard Administrator from 10.0.209.153
Oct 14 06:32:59  OA: Authentication failure for user administrator from 10.0.209.212, requesting web service
Oct 14 06:33:11  OA: Administrator logged into the Onboard Administrator from 10.0.209.212
Nov 13 14:01:14  OA: Authentication failure for user admin from 10.0.209.95, requesting web service
Nov 13 14:01:24  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 16 18:05:02  OA: Administrator logged into the Onboard Administrator from 10.0.210.240
Nov 16 18:20:57  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 16 18:32:57  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 17 11:41:04  OA: Authentication failure for user administrator from 10.0.209.95, requesting web service
Nov 17 12:13:52  OA: Authentication failure for user Administrator from 10.0.209.95, requesting web service
Nov 17 12:14:00  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 19 13:53:33  OA: Authentication failure for user admin from 10.0.210.106, requesting web service
Nov 19 13:53:44  OA: Authentication failure for user Admin from 10.0.210.106, requesting web service
Nov 19 13:53:53  OA: Administrator logged into the Onboard Administrator from 10.0.210.106
Nov 19 15:02:44  OA: Authentication failure for user admin from 10.0.209.95, requesting web service
Nov 19 15:02:56  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 20 19:59:20  OA: Authentication failure for user admin from 10.0.209.95, requesting web service
Nov 20 19:59:34  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 20 20:09:52  OA: Administrator logged out of the Onboard Administrator
Nov 28 08:42:40  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 28 08:45:15  OA: Blade in bay 1 has been powered down
Nov 28 08:45:15  OA: Blade in bay 2 has been powered down
Nov 28 08:45:21  OA: Blade 2 found a partner device.
Nov 28 08:45:21  OA: Blade 1 found a partner device.
Nov 28 08:45:21  OA: Blade 2 properly partners with its neighbor.
Nov 28 08:45:21  OA: Blade 1 properly partners with its neighbor.
Nov 28 08:45:21  OA: Blade in bay 2 has been powered on
Nov 28 08:50:18  OA: Onboard Administrator in bay 1 was restarted by user Administrator.
Nov 28 08:50:24  OA: Onboard Administrator is rebooting
Nov 28 08:51:22  Kernel: Network link is up at 100Mbps - Full Duplex
Nov 28 08:51:25  OA: Time zone changed to GMT+1
Nov 28 08:51:27  OA: Blade in bay #1 status changed to Unknown
Nov 28 08:51:27  OA: Blade in bay #2 status changed to Unknown
Nov 28 08:51:28  OA: LCD Status is: OK.
Nov 28 08:51:28  OA: Blade 1 is reporting nominal health status.
Nov 28 08:51:29  OA: Blade in bay #1 status changed to OK
Nov 28 08:51:31  Enclosure-Link: Service started
Nov 28 08:51:38  NTP: Successfully updated time/date using NTP
Nov 28 08:51:42  Enclosure-Link: Initial topology scan completed successfully
Nov 28 08:51:47  OA: Onboard Administrator booted successfully
Nov 28 08:51:49  OA: Fan Removed: Bay #3
Nov 28 08:51:53  OA: Fan Inserted: Bay #3
Nov 28 08:51:54  OA: HTTP server is up
Nov 28 08:51:59  OA: Blade 2 is reporting nominal health status.
Nov 28 08:52:00  OA: Blade in bay #2 status changed to OK
Nov 28 08:52:03  OA: Blade in bay #1 status changed to OK
Nov 28 08:52:27  OA: VLAN is disabled
Nov 28 08:54:02  OA: Authentication failure for user administrator from 10.0.209.95, requesting web service
Nov 28 08:54:18  OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 28 09:21:38  Kernel: Network link is down
Nov 28 09:28:09  NTP: Failed to update time/date using NTP
Nov 28 09:45:24  OA: PS Removed: Bay #2
Nov 28 09:45:49  OA: Server Power Reduction - Activated
Nov 28 09:45:50  OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 640W DC, Present Power: 70W AC.
Nov 28 09:45:50  OA: Enclosure Status changed from OK to Failed. (Power Subsystem)
Nov 28 09:46:14  OA: PS Status Changed: Bay #4 From: unknown To: failed
Nov 28 09:46:14  OA: PS Status Changed: Bay #5 From: unknown To: failed
Oct 15 07:59:39  Kernel: Network link is down
Oct 15 07:59:53  OA: Time zone changed to GMT+1
Oct 15 07:59:55  OA: Blade in bay #2 status changed to Unknown
Oct 15 07:59:56  OA: Device 2 power delayed during device discovery.
Oct 15 07:59:56  OA: LCD Status is: OK.
Oct 15 07:59:57  OA: Blade in bay #2 status changed to OK
Oct 15 07:59:59  Enclosure-Link: Service started
Oct 15 08:00:05  Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:00:06  OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:00:06  OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:00:06  OA: HTTP server is up
Oct 15 08:00:10  OA: Onboard Administrator booted successfully
Oct 15 08:00:16  OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:00:16  OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:00:16  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:00:47  OA: VLAN is disabled
Oct 15 08:01:45  OA: Internal health status of interconnect in bay 2 changed to OK
Oct 15 08:05:30  OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 540W DC, Present Power: 118W AC.
Oct 15 08:37:14  Kernel: Network link is down
Oct 15 08:37:28  OA: Time zone changed to GMT+1
Oct 15 08:37:30  OA: Blade in bay #2 status changed to Unknown
Oct 15 08:37:30  OA: Device 2 power delayed during device discovery.
Oct 15 08:37:31  OA: LCD Status is: OK.
Oct 15 08:37:32  OA: Blade in bay #2 status changed to OK
Oct 15 08:37:34  Enclosure-Link: Service started
Oct 15 08:37:40  OA: HTTP server is up
Oct 15 08:37:40  Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:37:41  OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:37:41  OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:37:44  OA: Onboard Administrator booted successfully
Oct 15 08:37:51  OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:37:51  OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:37:51  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:38:24  OA: VLAN is disabled
Oct 15 08:39:19  OA: Internal health status of interconnect in bay 2 changed to OK
Oct 15 08:41:42  OA: Authentication failure for user admin on the OA serial console.
Oct 15 08:50:52  Kernel: Network link is down
Oct 15 08:51:06  OA: Time zone changed to GMT+1
Oct 15 08:51:08  OA: Blade in bay #2 status changed to Unknown
Oct 15 08:51:08  OA: Device 2 power delayed during device discovery.
Oct 15 08:51:09  OA: LCD Status is: OK.
Oct 15 08:51:10  OA: Blade in bay #2 status changed to OK
Oct 15 08:51:12  Enclosure-Link: Service started
Oct 15 08:51:18  Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:51:18  OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:51:18  OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:51:21  OA: HTTP server is up
Oct 15 08:51:24  OA: Onboard Administrator booted successfully
Oct 15 08:51:29  OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:51:29  OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:51:29  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:52:01  OA: VLAN is disabled
Oct 15 09:53:06  OA: Password for `Administrator' changed by system
Oct 15 08:53:29  Kernel: Network link is down
Oct 15 08:53:44  OA: Time zone changed to GMT+1
Oct 15 08:53:45  OA: Blade in bay #2 status changed to Unknown
Oct 15 08:53:46  OA: Device 2 power delayed during device discovery.
Oct 15 08:53:47  OA: LCD Status is: OK.
Oct 15 08:53:48  OA: Blade in bay #2 status changed to OK
Oct 15 08:53:50  Enclosure-Link: Service started
Oct 15 08:53:56  OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:53:56  OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:53:57  Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:53:57  OA: HTTP server is up
Oct 15 08:54:00  OA: Onboard Administrator booted successfully
Oct 15 08:54:07  OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:54:07  OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:54:07  OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:54:16  OA: Authentication failure for user root on the OA serial console.
Oct 15 08:54:26  OA: Authentication failure for user administrator on the OA serial console.
Oct 15 08:54:37  OA: VLAN is disabled
Oct 15 08:54:40  OA: Authentication failure for user admin on the OA serial console.
Oct 15 09:01:30  OA: Administrator logged into the Onboard Administrator on the OA serial console.
Oct 15 09:03:20  Enclosure-Link: Found new Topology: New enclosure connected (1 total)
Oct 15 09:14:52  Enclosure-Link: Failed to get local address. Will keep retrying
Oct 15 09:15:31  Enclosure-Link: Failed to get local address. Will keep retrying
Oct 15 09:15:47  OA: Static TCP/IP settings were modified by user Administrator.
Oct 15 09:15:52  Kernel: Network link is down
Oct 15 09:16:12  Enclosure-Link: Failed to get local address. Will keep retrying
Oct 15 09:16:52  Enclosure-Link: Failed to get local address. Will keep retrying

>SHOW NETWORK

Enclosure Network Settings:

        - - - - - IPv6 Information - - - - -
        IPv6: Disabled
        DHCPv6: Disabled
        Router Advertisement: Disabled

Onboard Administrator Network Settings:

        - - - - - IPv4 Information - - - - -
        DHCP: Disabled
        IPv4 Address: 192.168.16.16
        Netmask: 255.255.255.0
        Gateway Address: 0.0.0.0

        - - - - - IPv6 Information - - - - -
        Static Address: Not Set
        Static IPv6 DNS 1: Not Set
        Static IPv6 DNS 2: Not Set

        - - - - - General Information - - - - -
        Active DNS Addresses:
                Primary:         Not Set
                Secondary:       Not Set
                Tertiary:        Not Set

        MAC Address: 00:1F:29:E7:24:0D
        Network Link Settings: Link Auto-negotiation

Onboard Administrator Protocol Status:
        Web (HTTP/HTTPS): Enabled
        SNMP: Disabled
        SecureSH: Enabled
        FIPS Mode: Off
        Trusted Hosts: Disabled
        HPSIM Trust Mode: Disabled
        Telnet: Enabled
        AlertMail: Disabled
                Mailbox: Not Set
                SMTP Server: Not Set
                Sender Domain: Not Set
        XML Reply: Enabled
        NTP: Enabled
                Primary NTP server: 192.36.144.22
                Secondary NTP server: 192.36.143.151
                Server Poll-Interval: 720 seconds
                Last Update: Update in progress
        Link Loss Failover: Not Supported
        Link Loss Interval: Not Supported
        Enclosure IP Mode: Not Supported
        GUI Login Detail: Disabled
        Active Health System: Enabled
        VLAN: Disabled
>SHOW POWER

Power Mode: Redundant
Dynamic Power: Enabled
Set Power Limit: Not Set

Power Capacity:              1200 Watts DC
Power Available:              660 Watts DC
Power Allocated:              540 Watts DC
Present Power:                181 Watts AC
Power Limit:                 1459 Watts AC

>SHOW RACK NAME

Rack Name: ByggBlade
>SHOW RACK INFO

Rack Information:
        Location hardware not found (No hardware support)

>SHOW SNMP

SNMP Configuration:
        Status: Disabled
        System Name: CZC8383004
        System Location:
        System Contact:
        Read Community Name: public
        Write Community Name:
        No trap receivers specified.

>SHOW SSHFINGERPRINT


1024 sha1:59:89:d2:4f:d4:c1:c5:63:22:c3:9f:44:e7:ec:b5:b3:ae:e3:76:ea /etc/ssh/id_dsa.pub (DSA)

>SHOW SSHKEY

There is no SSH key installed.

>SHOW HPSIM INFO

HPSIM Trust Mode: Disabled
Trusted Server Certificates
  No certificates were found.


>SHOW INTERCONNECT INFO ALL

1. Ethernet
        Product Name: GbE2c Ethernet Blade Switch
        Width: Single
        URL to Management interface: http://10.0.209.68
        In-Band IPv4 Address: 10.0.209.68
        User Assigned Name:
        Part Number: 410917-B21
        Spare Part Number: 414037-001
        Serial Number: MY383221E0
        Temperature Sensor: Present
        JS2 Connector: Absent
        Internal Ethernet Interface to OA: Present
        Internal Ethernet Route to OA: Enabled
        Internal Serial Interface to OA: Absent
        Internal Serial Route to OA: Disabled
        External Serial Port Interface: Present
        External Ethernet Interface: Present
        Manufacturer: HP

2. Fibre Channel
        Product Name: Brocade 4/12 SAN Switch for HP c-Class BladeSystem
        Width: Single
        URL to Management interface: http://10.0.209.41
        In-Band IPv4 Address: 10.0.209.41
        User Assigned Name: BYGGSANSW
        Part Number: AE370A
        Spare Part Number: 411120-001
        Serial Number: CN8820606G
        Temperature Sensor: Present
        JS2 Connector: Absent
        Internal Ethernet Interface to OA: Present
        Internal Ethernet Route to OA: Enabled
        Internal Serial Interface to OA: Present
        Internal Serial Route to OA: Enabled
        Serial Port Baud Rate: 9600
        External Serial Port Interface: Absent
        External Ethernet Interface: Absent
        Manufacturer: BROCADE

3. <absent>
4. <absent>
>SHOW INTERCONNECT LIST

Bay Interconnect Type     Manufacturer      Power   Health   UID  Management IP
--- ----------------- -------------------- ------- --------- --- ---------------
  1 Ethernet          HP                   On      OK        Off 10.0.209.68
  2 Fibre Channel     BROCADE              On      OK        Off 10.0.209.41
  3 [Absent]
  4 [Absent]
Totals: 2 interconnect modules installed, 2 powered on.
>SHOW INTERCONNECT SESSION


  Interconnect Bay        User
 ------------------  --------------

No Interconnect remote console sessions were detected.

>SHOW INTERCONNECT STATUS ALL

Interconnect Module #1 Status:
        Status: OK
        Thermal: OK
        CPU Fault: OK
        Health LED: OK
        UID: Off
        Powered: On
        Diagnostic Status:
                Internal Data        OK
                Management Processor OK
                Thermal Warning      OK
                Thermal Danger       OK
                Power                OK
                Device Failure       OK
                Device Degraded      OK

Interconnect Module #2 Status:
        Status: OK
        Thermal: OK
        CPU Fault: OK
        Health LED: OK
        UID: Off
        Powered: On
        Diagnostic Status:
                Internal Data        OK
                Management Processor OK
                Thermal Warning      OK
                Thermal Danger       OK
                Power                OK
                Device Failure       OK
                Device Degraded      OK

Interconnect Module #3 Status:
        Interconnect Module Type: No Interconnect Module Installed

Interconnect Module #4 Status:
        Interconnect Module Type: No Interconnect Module Installed

>SHOW INTERCONNECT PORT MAP ALL


1: GbE2c Ethernet Blade Switch
   Type: Ethernet
   Width: Single
   Status: No Connection

2: Brocade 4/12 SAN Switch for HP c-Class BladeSystem
   Type: Fibre
   Width: Single
   Status: No Connection

3. <absent>

4. <absent>

>SHOW INTERCONNECT POWERDELAY ALL

Current PowerDelay Status: Not in Progress

Bay               Device               PowerDelay State  Delay (seconds)
---  --------------------------------  ----------------  ---------------
  1  GbE2c Ethernet Blade Switch           Disabled        0
  2  Brocade 4/12 SAN Switch for HP c      Disabled        0
  3  Absent                                Disabled        0
  4  Absent                                Disabled        0

>SHOW SERVER LIST

Bay iLO Name                      iLO IP Address  Status   Power   UID Partner
--- ----------------------------- --------------- -------- ------- --- -------
  1 [Absent]
  2 Storage Blade                 N/A             Degraded Off     Off
  3 [Absent]
  4 [Absent]
  5 [Absent]
  6 [Absent]
  7 [Absent]
  8 [Absent]
Totals: 1 server blades installed, 0 powered on.
>SHOW SERVER NAMES

Bay Server Name                   Serial Number   Status   Power   UID Partner
--- ----------------------------- --------------- -------- ------- --- -------
  1 [Absent]
  2 Storage Blade                 SGI8360058      Degraded Off     Off
  3 [Absent]
  4 [Absent]
  5 [Absent]
  6 [Absent]
  7 [Absent]
  8 [Absent]
Totals: 1 server blades installed, 0 powered on.
>SHOW FRU

Enclosure
        Model: BladeSystem c3000 Enclosure
        Manufacturer: HP
        Serial Number: CZC8383004
        Part Number: 437502-B21

Enclosure Midplane
        Manufacturer: HP
        Spare Part Number: 441829-001

Onboard Administrator 1
        Model: BladeSystem c3000 Onboard Administrator
        Manufacturer: HP
        Serial Number: P3059%%9VW909F
        Part Number: 448589-B21
        Spare Part Number: 441832-001
        Firmware Version: 3.71
        HwVersion: %%

Blade   2
        Model: HP StorageWorks SB40c
        Manufacturer: HP
        Serial Number: SGI8360058
        Part Number: 411243-B21
        Spare Part Number: 430798-001

Interconnect 1
        Model: GbE2c Ethernet Blade Switch
        Manufacturer: HP
        Serial Number: MY383221E0
        Part Number: 410917-B21
        Spare Part Number: 414037-001

Interconnect 2
        Model: Brocade 4/12 SAN Switch for HP c-Class BladeSystem
        Manufacturer: BROCADE
        Serial Number: CN8820606G
        Part Number: AE370A
        Spare Part Number: 411120-001

Fan  1
        Model: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001

Fan  2
        Model: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001

Fan  3
        Model: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001

Fan  4
        Model: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001

Fan  5
        Model: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001

Fan  6
        Model: Active Cool 200 Fan
        Part Number: 412140-B21
        Spare Part Number: 413996-001

Power Supply  1
        Model: HP PROLIANT SERVER PS
        Serial Number: 531290A4DW650P
        Part Number: 437572-B21
        Spare Part Number: 441830-001

Power Supply  2
        Model: HP PROLIANT SERVER PS
        Serial Number: 531290A4DW96UL
        Part Number: 437572-B21
        Spare Part Number: 441830-001

Power Supply  4
        Model: HP PROLIANT SERVER PS
        Serial Number: 531290A4DWJ1NR
        Part Number: 437572-B21
        Spare Part Number: 441830-001

Power Supply  5
        Model: HP PROLIANT SERVER PS
        Serial Number: 531290A4DW96UN
        Part Number: 437572-B21
        Spare Part Number: 441830-001

Insight Display
        Model: BladeSystem c3000 Insight Display
        Manufacturer: HP
        Spare Part Number: 441831-001
        Firmware Version: 2.2.2

>SHOW SERVER INFO ALL

Server Blade #1 Information:
        Server Blade Type: No Server Blade Installed

Server Blade #2 Information:
        Type: Storage Blade
        Manufacturer: HP
        Product Name: HP StorageWorks SB40c
        Part Number: 411243-B21
        System Board Spare Part Number: 430798-001
        Serial Number: SGI8360058
        ROM Version: 1.20

Server Blade #3 Information:
        Server Blade Type: No Server Blade Installed

Server Blade #4 Information:
        Server Blade Type: No Server Blade Installed

Server Blade #5 Information:
        Server Blade Type: No Server Blade Installed

Server Blade #6 Information:
        Server Blade Type: No Server Blade Installed

Server Blade #7 Information:
        Server Blade Type: No Server Blade Installed

Server Blade #8 Information:
        Server Blade Type: No Server Blade Installed

>SHOW SERVER PORT MAP ALL

              Mezz
Mezz   Mezz  Device  Port      Interconnect Interconnect
Slot  Device  Port  Status         Bay        Bay Port       Device ID
----  ------ ------ ---------- ------------ ------------ ----------------

------------------------------- Blade 001 -------------------------------
<absent>


------------------------------- Blade 002 -------------------------------
No Port Mapping information available for blade 2

------------------------------- Blade 003 -------------------------------
<absent>


------------------------------- Blade 004 -------------------------------
<absent>


------------------------------- Blade 005 -------------------------------
<absent>


------------------------------- Blade 006 -------------------------------
<absent>


------------------------------- Blade 007 -------------------------------
<absent>


------------------------------- Blade 008 -------------------------------
<absent>


>SHOW SERVER STATUS ALL
Blade #1 Status:
        Power: No Server Blade Installed
Blade #2 Status:
        Power: Off
        Current Wattage used: 0
        Health: Degraded
        Unit Identification LED: Off
        Virtual Fan: 0%
        Diagnostic Status:
                Internal Data        OK
                Management Processor OK
                Missing Device       Failed
Blade #3 Status:
        Power: No Server Blade Installed
Blade #4 Status:
        Power: No Server Blade Installed
Blade #5 Status:
        Power: No Server Blade Installed
Blade #6 Status:
        Power: No Server Blade Installed
Blade #7 Status:
        Power: No Server Blade Installed
Blade #8 Status:
        Power: No Server Blade Installed

>SHOW SERVER TEMP ALL

Device Bay #1 Temperature Information
        No Server Blade Installed

Device Bay #2 Temperature Information
        Blade Power is Off. Cannot retrieve data.

Device Bay #3 Temperature Information
        No Server Blade Installed

Device Bay #4 Temperature Information
        No Server Blade Installed

Device Bay #5 Temperature Information
        No Server Blade Installed

Device Bay #6 Temperature Information
        No Server Blade Installed

Device Bay #7 Temperature Information
        No Server Blade Installed

Device Bay #8 Temperature Information
        No Server Blade Installed

>SHOW SERVER DVD ALL
DVD Drive: Absent

Server DVD connections:
Bay Connected Device or image URL
--- --------- -------------------------------------
  1 -         [Bay empty]
  2 -         [Non-server blade]
  3 -         [Bay empty]
  4 -         [Bay empty]
  5 -         [Bay empty]
  6 -         [Bay empty]
  7 -         [Bay empty]
  8 -         [Bay empty]

>SHOW SERVER POWERDELAY ALL

Current PowerDelay Status: Not in Progress

Bay               Device               PowerDelay State  Delay (seconds)
---  --------------------------------  ----------------  ---------------
  1  Absent                                Disabled        0
 1A  Absent                                Disabled        0
 1B  Absent                                Disabled        0
  2  HP StorageWorks SB40c                 Disabled        0
 2A  Absent                                Disabled        0
 2B  Absent                                Disabled        0
  3  Absent                                Disabled        0
 3A  Absent                                Disabled        0
 3B  Absent                                Disabled        0
  4  Absent                                Disabled        0
 4A  Absent                                Disabled        0
 4B  Absent                                Disabled        0
  5  Absent                                Disabled        0
 5A  Absent                                Disabled        0
 5B  Absent                                Disabled        0
  6  Absent                                Disabled        0
 6A  Absent                                Disabled        0
 6B  Absent                                Disabled        0
  7  Absent                                Disabled        0
 7A  Absent                                Disabled        0
 7B  Absent                                Disabled        0
  8  Absent                                Disabled        0
 8A  Absent                                Disabled        0
 8B  Absent                                Disabled        0

>SHOW SERVER BOOT ALL

Server Blade #1 Boot Information:
The blade is not present.


Server Blade #2 Boot Information:
        One time boot from: None

        IPL Devices (Boot Order):

Server Blade #3 Boot Information:
The blade is not present.


Server Blade #4 Boot Information:
The blade is not present.


Server Blade #5 Boot Information:
The blade is not present.


Server Blade #6 Boot Information:
The blade is not present.


Server Blade #7 Boot Information:
The blade is not present.


Server Blade #8 Boot Information:
The blade is not present.


>SHOW SYSLOG SERVER ALL
Retrieving Server syslog(s) ...

Server   1 Syslog:

The blade is not present.



Server   2 Syslog:

Could not determine the ip address of the management processor for blade



Server   3 Syslog:

The blade is not present.



Server   4 Syslog:

The blade is not present.



Server   5 Syslog:

The blade is not present.



Server   6 Syslog:

The blade is not present.



Server   7 Syslog:

The blade is not present.



Server   8 Syslog:

The blade is not present.



>SHOW SYSLOG ILO ALL
Retrieving iLO Event Log ...

Server   1 iLO Event Log:

The blade is not present.



Server   2 iLO Event Log:

Could not determine the ip address of the management processor for blade



Server   3 iLO Event Log:

The blade is not present.



Server   4 iLO Event Log:

The blade is not present.



Server   5 iLO Event Log:

The blade is not present.



Server   6 iLO Event Log:

The blade is not present.



Server   7 iLO Event Log:

The blade is not present.



Server   8 iLO Event Log:

The blade is not present.



>SHOW TOPOLOGY

Detecting linked enclosures .
An error occurred while communicating with the other Onboard Administrator.
 !.

Rack Topology (top-down)


Rack UUID: [Unknown]
Rack Name:


         Enclosure Name           Status  Local   IP Address         UUID
-------------------------------- -------- ----- --------------- --------------
                                 Unknown  Yes

>SHOW USBKEY

No USB keys detected in this Onboard Administrator. Note: USB keys can only be used in the Active Onboard Administrator.

>SHOW USER  (current user)

Local User "Administrator" Information:
        Full name: System Administrator
        Contact Info:
        User Rights: Admin
        Account Status: Enabled
        Server Bay Access List: 1 1A 1B 2 2A 2B 3 3A 3B 4 4A 4B 5 5A 5B 6 6A 6B 7 7A 7B 8 8A 8B
        Interconnect Bay Access List: 1 2 3 4
        OA Access: Yes
>SHOW USER LIST

 * denotes current user
                                                                   Privilege   Acct.
   User Name                                 Full Name             Level       Status
   ----------------------------------------  --------------------  ----------  ---------
 * Administrator                             System Administrator  Admin       Enabled

>SHOW LDAP INFO

Directory Services (LDAP)
        Enabled                   : Disabled
        Local Users Enabled       : Enabled
        NT Name Mapping           : Disabled
        Directory Server          :
        Directory Server SSL Port : 0
        Search Context #1         :
        Search Context #2         :
        Search Context #3         :
        Search Context #4         :
        Search Context #5         :
        Search Context #6         :
>SHOW LDAP CERTIFICATE

No certificates were found.

>SHOW LDAP GROUP LIST

No LDAP groups were detected.

>SHOW CA CERTIFICATE

No CA certificates are imported.

>SHOW TWOFACTOR INFO

Two Factor Authentication:
        Enabled                   : Disabled
        Certificate Revocation    : Disabled
        Certificate Owner Field   : Subject

>SHOW PASSWORD SETTINGS

Strong Passwords:               Disabled
Minimum Password Length:        3

>SHOW UPDATE

Device  Name                                          Location Version    NewVersion
-----------------------------------------------------------------------------------
TRAY  | BladeSystem c3000 Onboard Administrator       | -     | 2.10     | 2.10 
LCD   | BladeSystem c3000 Insight Display             | -     | 2.2.2    | 2.2.2
BLADE | HP StorageWorks SB40c                         | 2     | 1.20     | 2.20 
FAN   | Active Cool 200 Fan                           | 1     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 2     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 3     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 4     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 5     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 6     | 2.9.4    | 2.9.4

>SHOW SYSLOG SETTINGS

Remote log:     Disabled
Address:
Port:           514

>SHOW VCMODE

Virtual Connect Mode: Disabled

>SHOW SESSION TIMEOUT

Session Timeout: Disabled

>SHOW VLAN

VLAN is disabled. OA VLAN ID = 1. Default VLAN ID (untagged) = 1.

VLAN VLAN NAME
---- ---------
1    Default

Device Settings
BAY VLAN
--- ----
1   1
2   1
3   1
4   1
5   1
6   1
7   1
8   1

Interconnect Settings
BAY VLAN
--- ----
1   1
2   1
3   1
4   1

>SHOW URB

Utility Ready Blade (URB) Reporting Settings

        URB Reporting:          Disabled
        Endpoint URL:
        Proxy URL:
        SMTP Server:
        Email Address:
        Interval:               Daily at hour 0
        Last Attempt:           HTTP Failed on Wed Dec 31 23:00:00 1969
                                SMTP Failed on Wed Dec 31 23:00:00 1969

>SHOW FIRMWARE SUMMARY

Enclosure Firmware Summary

Onboard Administrator Firmware Information
Bay Model                                              Firmware Version
--- -------------------------------------------------- ----------------
1   BladeSystem c3000 Onboard Administrator            3.71

Enclosure Component Firmware Information
Device  Name                                          Location Version    NewVersion
-----------------------------------------------------------------------------------
TRAY  | BladeSystem c3000 Onboard Administrator       | -     | 2.10     | 2.10 
LCD   | BladeSystem c3000 Insight Display             | -     | 2.2.2    | 2.2.2
BLADE | HP StorageWorks SB40c                         | 2     | 1.20     | 2.20 
FAN   | Active Cool 200 Fan                           | 1     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 2     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 3     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 4     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 5     | 2.9.4    | 2.9.4
FAN   | Active Cool 200 Fan                           | 6     | 2.9.4    | 2.9.4


Device Firmware Information

Interconnect Firmware Information

Bay Device Model                                        Firmware Version
--- --------------------------------------------------- ----------------
  1 GbE2c Ethernet Blade Switch                         [Not Available]
  2 Brocade 4/12 SAN Switch for HP c-Class BladeSystem  [Not Available]
>SHOW FIRMWARE SUMMARY CSV
Bay Number, Device Name, Discovered, Firmware Component, Current Version, Firmware ISO Version

>SHOW FIRMWARE MANAGEMENT

Enclosure Firmware Settings

Enclosure:              CZC8383004
Firmware Management:    Disabled
- Force Downgrade:      Disabled
- Firmware ISO URL:     Not Set
- Firmware Power Policy:        OFF
- Firmware Policy:      Manual Only
- Firmware Date:        Not Set
- Bays to Include
        Server Bays: None

Firmware ISO Information:
- ISO URL Status:       N/A
>SHOW FIRMWARE MANAGEMENT LOG
May 29 08:40:32 Enclosure Firmware Management started.
Jun 18 13:22:43 Enclosure Firmware Management started.
Sep 24 11:01:36 Enclosure Firmware Management started.
Dec 19 13:54:43 Enclosure Firmware Management started.
Mar 10 13:43:09 Enclosure Firmware Management started.
Apr 15 22:09:28 Enclosure Firmware Management started.
Nov 28 08:50:29 Enclosure Firmware Management terminated.
Nov 28 08:51:32 Enclosure Firmware Management started.
Oct 15 08:00:01 Enclosure Firmware Management started.
Oct 15 08:37:36 Enclosure Firmware Management started.
Oct 15 08:51:13 Enclosure Firmware Management started.
Oct 15 08:53:52 Enclosure Firmware Management started.

>SHOW FIRMWARE LOG SERVER ALL

There are no firmware logs to display.

>SHOW SERVER FIRMWARE ALL

Device Firmware Information

>SHOW REMOTE_SUPPORT

        Status                           : Disabled
        Connection type                  : None
        IRS Hostname                     :
        IRS Port                         : 0
        Last successful registration     : 0000-00-00T00:00:00
        Last successful unregistration   : 0000-00-00T00:00:00
        Last successful Data Collection  : 0000-00-00T00:00:00
        Last successful Service Event    : 0000-00-00T00:00:00
        Failed Data Collection attempts  : 0
        Failed Service Event attempts    : 0
        Maintenance Mode                 : Disabled
>SHOW REMOTE_SUPPORT EVENT

(No Remote Support Service Events)

>SHOW DEVICE SERIAL_NUMBER BLADE ALL

Blade #1 Information:
        The specified bay is empty.

Blade #2 Information:
        Serial Number: SGI8360058

Blade #3 Information:
        The specified bay is empty.

Blade #4 Information:
        The specified bay is empty.

Blade #5 Information:
        The specified bay is empty.

Blade #6 Information:
        The specified bay is empty.

Blade #7 Information:
        The specified bay is empty.

Blade #8 Information:
        The specified bay is empty.

>SHOW SOLUTIONSID
0000000000000000
>SHOW LOGIN_BANNER

        Login Banner:
                Status                  : Disabled
                Login Banner Text       :
(* empty *)


OA-BYGGBLADE>

iDRAC 7 configuration of esxi-f1 (drac-f1.cnap.hv.se)

Power Supply.Slot.1	                                00.0C.6F	
Integrated Dell Remote Access Controller	        2.41.40.40	
Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:60	20.2.17	
Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:61	20.2.17	
Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:62	20.2.17	
Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:63	20.2.17	
BIOS	2.3.4	
PERC H330 Mini	                                         25.5.0.0019	
Disk 0 in Backplane 1 of Integrated RAID Controller 1	DS03	
BP13G+ 0:1	                                        2.23	
Lifecycle Controller	                                2.41.40.40	
Dell 32 Bit uEFI Diagnostics, version 4239, 4239A33, 4239.41	4239A33	
Dell OS Driver Pack, 16.10.10, A00	               16.10.10	
OS COLLECTOR 2.1, A00	                                2.1	
System CPLD	                                        1.0.3

PERC H330 Mini (Embedded)	Integrated RAID Controller 1	25.5.0.0019	Information Not Available
Personal tools
Namespaces

Variants
Actions
Navigation
Tools