Simons Roliga Kod

# Batch convert all .ppt/.pptx files encountered in folder and all its subfolders
# The produced PDF files are stored in the invocation folder
#
# Adapted from http://stackoverflow.com/questions/16534292/basic-powershell-batch-convert-word-docx-to-pdf
# Thanks to MFT, takabanana, ComFreek
#
# If PowerShell exits with an error, check if unsigned scripts are allowed in your system.
# You can allow them by calling PowerShell as an Administrator and typing
# ```
# Set-ExecutionPolicy Unrestricted
# ```
# Get invocation path
$curr_path = Split-Path -parent $MyInvocation.MyCommand.Path
# Create a PowerPoint object
$ppt_app = New-Object -ComObject PowerPoint.Application
# Get all objects of type .ppt? in $curr_path and its subfolders
Get-ChildItem -Path $curr_path -Recurse -Filter *.ppt? | ForEach-Object {
    Write-Host "Processing" $_.FullName "..."
    # Open it in PowerPoint
    $document = $ppt_app.Presentations.Open($_.FullName)
    # Create a name for the PDF document; they are stored in the invocation folder!
    # If you want them to be created locally in the folders containing the source PowerPoint file, replace $curr_path with $_.DirectoryName
    $pdf_filename = "$($curr_path)\$($_.BaseName).pdf"
    # Save as PDF -- 17 is the literal value of `wdFormatPDF`
    $opt= [Microsoft.Office.Interop.PowerPoint.PpSaveAsFileType]::ppSaveAsPDF
    $document.SaveAs($pdf_filename, $opt)
    # Close PowerPoint file
    $document.Close()
}
# Exit and release the PowerPoint object
$ppt_app.Quit()
[System.Runtime.Interopservices.Marshal]::ReleaseComObject($ppt_app)
Get-ChildItem -Filter "*Chp*.pdf" -Recurse | Rename-Item -NewName {$_.name -replace 'Chp','Kapitel_'}

#This is a bash script to check ssh services on hosts
#You need a host file with each IP-address on a separate row
#The source file for the text is used as an argument, ie ./ssh-check.sh ip.txt
#Edit the nc row to alter the port you are testing for, in this case its ssh=22
#Results are output to screen and a text file in the same directory
#!/bin/bash
echo "=================================="
rm results.txt

while read p; do
   nc -znv -w3 $p 22
   if [ $? -ne 0 ]
   then
     echo "No connection" | tee -a results.txt
   else
     echo "OK" | tee -a results.txt
   fi
done < $1

# This is a bash script to generate qrcodes by reading a text string
# from a file and adding a human readable text part below the qr code
# The source file for the text is used as an argument, ie ./qrcodes.sh hosts.txt
#!/bin/bash
echo "=================================="

while read p; do
  if echo "$p" | grep '*\|\/'; then
    echo "Illegal entry in hosts.txt file"
    break
  else
    qrencode -s 5 -i $p -o $p-QR.png
    convert $p-QR.png -pointsize 24 label:"$p" -gravity center -append $p.png
      rm $p-QR.png
  fi
done < $1

// 1. behövs för att köra vm-ware modulen i windows då den är "tredjepart"
Set-ExecutionPolicy remotesigned 

// 2. -Scope begränsar installation till inloggad användare
install-module -Name VMware.PowerCLI -Scope CurrentUser

// 3. Kommer att fråga om dina credentials, använd samma som gui inloggningen 
Connect-VIServer -server vcenter-b.cnap.hv.se

// 4. länk till object som är h6 hosten (till exempel)
$myVMHost = Get-VMHost -name esxi-h6.cnap.hv.se

!! VA RIKTIGT RIKTIGT SÄKER PÅ ATT DET ÄR HÄR DU VILL PILLA !!

// 5. länk till vswitch som skall pillas på
$vswitch = Get-VirtualSwitch -vmhost $myVMHost -name vSwitch1

// 6. Skapar VLAN med namn "VLAN20XX" och vlan id 20XX
for ($i=2004; $i -le 2038; $i++) {New-VirtualPortGroup -VirtualSwitch $vswitch -name "VLAN$i" -VLanId $i}

// 7. tar bort portgroups "VLAN2037-VLAN2038" på vswitchen som definieras i steg >>5<<
// OBS! -confirm:$false stänger av en "are you sure, dummy" fråga. Är du inte säker, ta bort detta ur raden! OBS!
for ($i=2037; $i -le 2038; $i++) {Get-VirtualPortGroup -VirtualSwitch $vswitch -name "VLAN$i" | Remove-VirtualPortGroup -confirm:$false}

// Bryt kopplingen till vcentret
Disconnect-VIServer

Taget från virtuallymikebrown.com

$remove_vms = Read-Host -Prompt 'Input the server match string to remove from disk'
Write-Host "The entered string was: '$remove_vms'"
$select_confirm = Read-Host -Prompt 'Confirm your selection string (y/n)'

if($select_confirm -eq 'y') {
	 $VMs = Get-VM $remove_vms
	 foreach($VM in $VMs) {
	 	 Write-Host $VM
	 	 }
	 Write-Host "The listed VMs above will be permanently deleted from disk!"
	 Write-Host "Are you absolutely sure you want to do this?"
	 $nuclearoption = Read-Host -Prompt 'Type in "DELETE" to confirm this operation!'
	 if($nuclearoption -eq 'DELETE') {
	 	 Write-Host "Deleting..."
	 	 foreach($active in $VMs) {
	 	 	 if($active.Powerstate -eq "PoweredOn") {
	 			 Stop-VM -VM $active -Confirm:$false -RunAsync | Out-Null
	 			 Start-Sleep -Seconds 7 
	 			 }
	 		 }
	 	 foreach($delete in $VMs) {
	 			 Remove-VM -VM $delete -DeleteFromDisk -Confirm:$false -RunAsync | Out-Null 
	 			 }
	 	 }
	 }

https://medium.com/better-programming/how-to-send-push-notifications-to-your-phone-from-any-script-6b70e34748f6

• Visit http://ifttt.com and sign up for an account.
• Click on your account icon (top right), and then click on Create.
• Click on the If+ icon and type “Webhooks” in the search box.
• Select Webhooks → Receive a Web Request and type “notify” for your event name.
• Next, click on the +That icon and type “Notifications” in the search box.
• Select “Send a notification from the IFTTT app.”
• Type the following text into the Message box:

Notification: {{Value1}}

• Click 'Create action' and then give your action a name, e.g. “Push Notification.” Then click on Finish.

Testing the Notification

• Install the ifttt app on your android device
• Visit https://ifttt.com, and then:
  • Click on your account icon (top right), and then click on My Services.
  • Select Webhooks from the list, and then click on Documentation.
• A screen should be displayed showing your API URL as well as some fields to pass values via a POST request.
  • Type “notify” (the name of our event) in the event box.
  • Type “test” in the Value 1 box.

The resulting command at the bottom should look something like this:

curl -X POST -H "Content-Type: application/json" -d '{"value1":"Meddelande här!"}' https://maker.ifttt.com/trigger/notify/with/key/DIN_API_NYCKEL_HÄR

• Klicka på test it för att skicka ett test till telefonen (eller kör kommandot via din linux/curl)

Kort bash function för att skicka ett custom meddelande

cli-2-phone()
{
    printf -v message '{"value1":"%s"}' "$*"
     $1  && curl -X POST -H "Content-Type: application/json" -d "$message" https://maker.ifttt.com/trigger/notify/with/key/DIN_API_NYCKEL_HÄR > /dev/null 2>&1 ; return
     $0  && echo "You need to specify a message!"; return
}

Det är nu hyfsat enkelt att anropa detta via ett python program t.ex.