CNAP Blade Chassis
From Datateknik
(Difference between revisions)
(→Dell Chassi) |
|||
| (36 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
hej | hej | ||
= CNAP Blade Chassis @ hv.se = | = CNAP Blade Chassis @ hv.se = | ||
| − | + | In the course, we only use one HP c3000 blade chassis with 8 CPU blades | |
| + | |||
== HP BLc 3000 Enclosure == | == HP BLc 3000 Enclosure == | ||
[[File:blc3000-front.png|right|300px]] | [[File:blc3000-front.png|right|300px]] | ||
| − | Username: Administrator Password: JUFBSWIX (for | + | Username: Administrator Password: JUFBSWIX (for blc3001 in b123a, closest to the door) |
| − | <br>Username: Administrator Password: 3H0TDQQV (for blc3002 in | + | <br>Username: Administrator Password: 3H0TDQQV (for blc3002 in b123a) |
*[http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c01167165&lang=en-us&cc=us Setup and Installation Guide] vilken kontakt är vilken | *[http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c01167165&lang=en-us&cc=us Setup and Installation Guide] vilken kontakt är vilken | ||
| Line 44: | Line 45: | ||
* [http://blog.helge.net/2009/01/vlan-tagging-on-gbe2c.html VLAN tagging on GbE2c] | * [http://blog.helge.net/2009/01/vlan-tagging-on-gbe2c.html VLAN tagging on GbE2c] | ||
'''HP Cisco switch''': [http://www8.hp.com/h20195/v2/GetPDF.aspx/c04128340.pdf Specs on page 16] -- [http://www.pinnacledata.co.uk/product/hp-cisco-catalyst-3020-blade-switch/ HP SWITCH CISCO CATALYST 3020 BLADE] [http://www.ebay.com/itm/Cisco-MDS-9124e-24-Port-Fabric-Switch-for-BLc3000-BLc7000-HP-AG642A-DS-HP-FC-K9-/400745897822 Cisco MDS 9124e 24-Port Fabric Switch for BLc3000 BLc7000 HP AG642A DS-HP-FC-K9] | '''HP Cisco switch''': [http://www8.hp.com/h20195/v2/GetPDF.aspx/c04128340.pdf Specs on page 16] -- [http://www.pinnacledata.co.uk/product/hp-cisco-catalyst-3020-blade-switch/ HP SWITCH CISCO CATALYST 3020 BLADE] [http://www.ebay.com/itm/Cisco-MDS-9124e-24-Port-Fabric-Switch-for-BLc3000-BLc7000-HP-AG642A-DS-HP-FC-K9-/400745897822 Cisco MDS 9124e 24-Port Fabric Switch for BLc3000 BLc7000 HP AG642A DS-HP-FC-K9] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== IP Addresses == | == IP Addresses == | ||
| Line 81: | Line 59: | ||
== HP Switch Configuration == | == HP Switch Configuration == | ||
| + | Layer 3 version [[File:hp-gbe2c.png|x90px]] | ||
| + | |||
<font size="-3"> | <font size="-3"> | ||
>> Information# '''/info/port''' | >> Information# '''/info/port''' | ||
Latest revision as of 07:56, 10 September 2020
hej
Contents |
[edit] CNAP Blade Chassis @ hv.se
In the course, we only use one HP c3000 blade chassis with 8 CPU blades
[edit] HP BLc 3000 Enclosure
Username: Administrator Password: JUFBSWIX (for blc3001 in b123a, closest to the door)
Username: Administrator Password: 3H0TDQQV (for blc3002 in b123a)
- Setup and Installation Guide vilken kontakt är vilken
- 2007 HP BladeSystem Onboard Administrator User Guide
- 2015 HP BladeSystem Onboard Administrator User Guide
SET MANAGEMENT IP ADDRESS
- Plug in the cable in OA, not uplink !!
- SET IPCONFIG STATIC 1 192.168.16.16 255.255.255.0
Drivers & Firmware
- Serial Number / Product ID: CZC9081KQN / 500041-B21 hp.com/support for BL495c G5 Blade
- BLc3000 hp.com/support for Part Number: 437502-B21
- c3000 HPE BladeSystem c3000 Enclosures SN: CZC8383004
- Unsupported devices: 1166:024a and 103c:3112
- Devices deprecated and unsupported in VMware ESXi 6.0 (2087970)
- PciInfo 1166:024a BCM5785 [HT1000] SATA (Native SATA Mode)
- PciInfo 103c:3112 Probably a HostBasedAdapter (HBA) for storage FibreChannel (FC)
[edit] Blade Management
- Fixing HP ILO2 Java Remote Console fails to start with ClassNotFound remcons.class
- Fixing HP ILO2 Java Remote Console] fails to start with Application Blocked. Click for details security settings...certificate from running
- run the application "Configure Java"
- Under /Security\ press "Edit Site List..." and add the IP-address of youre BladePC (Example: https://192.168.20.181)
- Fix Java:
- Uninstall Mozilla Firefox
- Download win32 Firefox 3.5.19 from ftp.mozilla.org/pub/firefox/releases
- Using Firefox3.5, goto java.com/download/ , run installer (doubleclick), and install java
- Close and restart Mozilla Firefox
- Google "verify java" and test it from the java.com-site
[edit] SWITCH: GbE2c Ethernet Blade Switch
- Christmas Wish: HP Cisco Catalyst 1GbE 3120G Blade Switch 451438-B21 Spare# 451356-001 Ebay or a Catalyst 3020
- Passwsord: admin
- GbE2c Ethernet Blade Switch for HP c-Class Quick Setup Instructions
- 2006: HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Application Guide
- Firmware etc for SN: MY383221E0, www.hpe.com files download
- Dot1q on HP's is called "tagging"
- VLAN tagging on GbE2c
HP Cisco switch: Specs on page 16 -- HP SWITCH CISCO CATALYST 3020 BLADE Cisco MDS 9124e 24-Port Fabric Switch for BLc3000 BLc7000 HP AG642A DS-HP-FC-K9
[edit] IP Addresses
alfa.cnap.hv.se[/var/named]# grep 3000 db.cnap.hv.se blc3000.cnap.hv.se. 3600 IN A 192.168.20.8 hp-left.cnap.hv.se 3600 IN A 192.168.17.38 hp-right.cnap.hv.se 3600 IN A 192.168.17.39 Blade-left.cnap.hv.se. 3600 IN A 192.168.17.26 Blade-right.cnap.hv.se. 3600 IN A 192.168.17.25
[edit] HP Switch Configuration
Layer 3 version 
>> Information# /info/port
Port Tag RMON PVID NAME VLAN(s) ---- --- ---- ----- -------------- ------------------------------- 1 y d 1* Downlink1 1 11 12 16 20 2 y d 1* Downlink2 1 11 12 16 20 3 y d 1* Downlink3 1 11 12 16 20 4 y d 1* Downlink4 1 11 12 16 20 5 y d 1* Downlink5 1 11 12 16 20 6 y d 1* Downlink6 1 11 12 16 20 7 y d 1* Downlink7 1 11 12 16 20 8 y d 1* Downlink8 1 11 12 16 20 9 y d 2 Downlink9 2 10 n d 2 Downlink10 2 11 n d 2 Downlink11 2 12 n d 2 Downlink12 2 13 n d 2 Downlink13 2 14 n d 2 Downlink14 2 15 n d 2 Downlink15 2 16 n d 2 Downlink16 2 17 n d 1* Xconnect1 1 18 n d 1* Xconnect2 1 19 n d 4095 Mgmt 4095 20 n d 1* Uplink1 1 21 n d 2 Uplink2 2 22 n d 2 Uplink3 2 23 n d 1* Uplink4 1 24 y d 1* Uplink5 1 11 12 16 17 20 42 * = PVID is tagged.
>> Information# /info/l2/vlan
VLAN Name Status Ports ---- -------------------------------- ------ ------------------------- 1 Default VLAN ena 1-14 17 18 20 23 24 Reminder: Port 17 needs to be enabled. Reminder: Port 18 needs to be enabled. 2 STORAGE ena 15 16 21 22 10 VLAN 10 ena 9 11 HP-VildaVastern ena 1-8 24 12 HP-StudentLab ena 1-8 24 16 HP-NATciscoLabPC ena 1-8 24 17 RA Mgmnt VLAN ena 24 20 VLAN 20 ena 1-8 24 42 Native Blackhole VLAN ena 24 4095 Mgmt VLAN ena 19
[edit] CNAP uplink trunk on port 24
- Use . (single period) to print menu
- Use .. to move up one level
switchport mode trunk
/cfg/port Enter port (1-24): 24 >> Port 5# tag Current VLAN tag support: disabled Enter new VLAN tag support [d/e]: e
create vlan
/cfg/l2/vlan Enter VLAN number: (1-4095) 17 ena Current status: disabled New status: enabled /cfg/l2/vlan Enter VLAN number: (1-4095) 17 name "RA Management VLAN"
allowed-vlans
/cfg/l2/vlan 17 add 24 /cfg/l2/vlan 20 add 24 /cfg/l2/vlan 24 add 24
Before you finish remember to apply and save the changes. You apply them to make them active, and you save them so they are persistent between reboots of the switch.
apply save
[edit] iSCSI Storage LAN -- using VLAN 2
- Use . (single period) to print menu
- Use .. to move up one level
Create, Name & Enable VLAN 2
>> VLAN 2# /cfg/l2/vlan/name
Enter VLAN number: (1-4095) 2
Current VLAN name:
Pending new VLAN name: VLAN 2
Enter new VLAN name: STORAGE
>> VLAN 2# /cfg/l2/vlan/
Enter VLAN number: (1-4095) 2
------------------------------------------------------------
[VLAN 2 Menu]
name - Set VLAN name
stg - Assign VLAN to a Spanning Tree Group
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
>> VLAN 2# ena
Current status: disabled
New status: enabled
>> VLAN 2# apply
>> VLAN 2# /info/l2/vlan/dump
ADD PORTS TO VLAN
>> VLAN 1# /cfg/l2/vlan/
Enter VLAN number: (1-4095) 2
------------------------------------------------------------
[VLAN 2 Menu]
name - Set VLAN name
stg - Assign VLAN to a Spanning Tree Group
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
>> VLAN 2# add
Current VLAN 2: empty
Enter port to be added: 21
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 21
>> VLAN 2# add
Current VLAN 2: empty
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 21
Enter port to be added: 22
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 21 22
>> VLAN 2# add
Current VLAN 2: empty
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 21 22
Enter port to be added: 15
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 15 21 22
>> VLAN 2# add
Current VLAN 2: empty
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 15 21 22
Enter port to be added: 16
Current ports for VLAN 2: empty
Pending new ports for VLAN 2: 15 16 21 22
>> VLAN 2# /info/l2/vlan/dump
Configure default VLAN on ports
>> Port 1# /cfg/port/pvid Enter port (1-24): 15 Current port VLAN ID: 1 Enter new port VLAN ID [1-4094]: 2 >> Port 15# /cfg/port/pvid Enter port (1-24): 16 Current port VLAN ID: 1 Enter new port VLAN ID [1-4094]: 2 >> Port 16# /cfg/port/pvid Enter port (1-24): 21 Current port VLAN ID: 1 Enter new port VLAN ID [1-4094]: 2 >> Port 21# /cfg/port/pvid Enter port (1-24): 22 Current port VLAN ID: 1 Enter new port VLAN ID [1-4094]: 2 >> Port 22#
>> Port 15# tagpvid Current tag pvid support: enabled Enter new tag pvid support [d/e]: d Port 16 changed to pvid untagged. >> Port 16# tagpvid Current tag pvid support: enabled Enter new tag pvid support [d/e]: d Port 16 changed to pvid untagged. >> Port 16# cur Current port 16 configuration: enabled, PVID 2 name Downlink16 The DLF rate control currently turned off The Multicast rate control currently turned off The Broadcast rate control currently turned off 802.1p priority: 0 ACL Port config is empty >> Port 16#
Before you finish remember to apply and save the changes. You apply them to make them active, and you save them so they are persistent between reboots of the switch.
apply save
[edit] Remote Management: Telnet Connectivity
Configuring an IP Interface
Källa: BLADE OS Application Guide HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Version 5.1 Advanced Functionality Software
1.Configure an IP interface for the Telnet connection, using the sample IP address of 205.21.17.3. 2.The pending subnet mask address and broadcast address are automatically calculated. 3.If necessary, configure up to two default gateways. 4.Configuring the default gateways allows the switch to send outbound traffic to the routers. 5.Apply, verify, and save the configuration. #/cfg/l3/if 256 (Select IP interface 256, used by web-GUI for administration) IP Interface 256#addr 192.168.17.39(Assign IP address for the interface) Current IP address: 0.0.0.0 New pending IP address: 205.21.17.39 IP Interface 256# mask 255.255.255.0 Pending new subnet mask: 255.255.255.0 IP Interface 1#ena (Enable IP interface 1) IP Interface 5#/cfg/l3/gw 1 (Select primary default gateway) Default gateway 1#addr 192.168.17.1 (Assign IP address for primary router) Default gateway 1#ena (Enable primary default gateway) Default gateway 1#../gw 2 (Select secondary default gateway) Default gateway 2#addr 0.0.0.0 (Assign address for secondary router) Default gateway 2#disable (DISEnable secondary default gateway) Default gateway 2#apply (Apply the configuration) Default gateway 2#save (Save the configuration) #/info/l3/ip #/cfg/dump (Verify the configuration)
Select VLAN for Management Port
Källa: Deploying the HP GbE2c Ethernet Blade Switch for HP c-Class BladeSystem into a Cisco-based Network HOWTO
/cfg/l2/vlan 17 <-- DOES NOT WORK add 19 <-- port 19 will NOT move !! /cfg/l3/if <number> /vlan <vlan#> /ena/apply
>> Layer 3# dump IP information: Interface information: 1: 192.168.20.191 255.255.255.0 192.168.20.255, vlan 20, up <-- WRONG ?!? 17: 192.168.17.48 255.255.255.0 192.168.17.255, vlan 17, up 256: 10.10.10.10 255.255.255.0 10.10.10.255, vlan 4095, up
[edit] LLDP = IEEE 802.1ab protocol (CDP-like functionality)
Link Layer Discovery Protocol. An IEEE 802.1ab protocol that provides CDP-like functionality
Källa: BLADE OS Application Guide HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Version 5.1 Advanced Functionality Software Globally enable LLDP
/cfg/l2/lldp/on
Port Level: Transmit and Receive Control
/cfg/l2/lldp/port >> LLDP Port# admstat tx_rx (Transmit and receive LLDP) >> LLDP Port# admstat tx_only (Only transmit LLDP) >> LLDP Port# admstat rx_only (Only receive LLDP) >> LLDP Port# admstat disabled (Do not participate in LLDP) >> # /cfg/l2/lldp/cur (View LLDP status of all ports) or >> # /cfg/l2/lldp/port <n> /cur (View status of the selected port)
Cisco IOS
conf t lldp run interface range gig 0/1 - 24 lldp
[edit] >> Layer 2# /info/l2/vlan/dump
VLAN Name Status Ports
---- -------------------------------- ------ -------------------------
1 Default VLAN ena 1-18 20-24
Reminder: Port 17 needs to be enabled.
Reminder: Port 18 needs to be enabled.
10 VLAN 10 ena 9
16 VLAN 16 dis 1-8
Reminder: VLAN 16 needs to be enabled.
17 RA Mgmnt VLAN ena 24
20 VLAN 20 ena 1-8 24
42 Native Blackhole VLAN ena 24
4095 Mgmt VLAN ena 19
------------------------------------------------------------------
upfast disabled, update 40
Pvst+ compatibility mode enabled
------------------------------------------------------------------
Spanning Tree Group 1: On (STP/PVST+)
VLANs: 1 10 16 17 20 42
Reminder: VLAN 16 needs to be enabled.
Current Root: Path-Cost Port Hello MaxAge FwdDel
6001 00:21:1b:ec:da:00 8 24 2 20 15
Parameters: Priority Hello MaxAge FwdDel Aging
65534 2 20 15 300
Port Priority Cost FastFwd State Designated Bridge Des Port
---- -------- ---- -------- ---------- --------------------- --------
1 0 0 n FORWARDING *
2 0 0 n FORWARDING *
3 0 0 n FORWARDING *
4 0 0 n FORWARDING *
5 0 0 n FORWARDING *
6 0 0 n FORWARDING *
7 0 0 n FORWARDING *
8 0 0 n FORWARDING *
9 0 0 n FORWARDING *
10 0 0 n FORWARDING *
11 0 0 n FORWARDING *
12 0 0 n FORWARDING *
13 0 0 n FORWARDING *
14 0 0 n FORWARDING *
15 0 0 n FORWARDING *
16 0 0 n FORWARDING *
17 128 0! n DISABLED
18 128 0! n DISABLED
20 128 0! n DISABLED
21 128 0! n DISABLED
22 128 0! n DISABLED
23 128 0! n DISABLED
24 128 4! n FORWARDING 8001-d4:d7:48:17:45:00 8019
* = STP turned off for this port.
! = Automatic path cost.
------------------------------------------------------------------
Spanning Tree Group 128: Off (STP/PVST+), FDB aging timer 300
VLANs: 4095
Port Priority Cost FastFwd State Designated Bridge Des Port
---- -------- ---- -------- ---------- --------------------- --------
19 0 0 n FORWARDING *
* = STP turned off for this port.
------------------------------------------------------------------
MSTP is not on.
VLAN Name Status Ports
---- -------------------------------- ------ -------------------------
1 Default VLAN ena 1-18 20-24
Reminder: Port 17 needs to be enabled.
Reminder: Port 18 needs to be enabled.
10 VLAN 10 ena 9
16 VLAN 16 dis 1-8
Reminder: VLAN 16 needs to be enabled.
17 RA Mgmnt VLAN ena 24
20 VLAN 20 ena 1-8 24
42 Native Blackhole VLAN ena 24
4095 Mgmt VLAN ena 19
Trunk group 1: Enabled
Protocol - Static
Port State:
17: STG 1 DOWN
Reminder: Port 17 needs to be enabled.
18: STG 1 DOWN
Reminder: Port 18 needs to be enabled.
Forwarding database information:
Mac address Aging Time: 300
MAC address VLAN Port Trnk State Permanent
----------------- ---- ---- ---- -----
00:0c:29:5c:13:38 20 5 FWD
00:0c:29:5d:4d:c1 20 2 FWD
00:0c:29:75:a1:0d 20 1 FWD
00:0c:29:eb:93:26 20 3 FWD
00:15:c5:fd:6d:57 1 24 FWD
00:15:c5:fd:dc:6a 1 24 FWD
00:1b:d4:a8:9c:1a 1 24 FWD
00:1f:29:e7:24:0c 4095 19 FWD
00:1f:29:e7:24:0d 20 24 FWD
00:21:1b:ec:da:47 17 24 FWD
00:21:1b:ec:da:4a 20 24 FWD
00:21:1b:ec:da:4a 4095 19 FWD
00:21:5a:f5:cf:28 20 3 FWD
00:21:5a:f5:dc:ac 20 1 FWD
00:21:5a:f5:e0:08 20 2 FWD
00:22:00:1a:36:01 20 24 FWD
00:50:56:89:6f:4a 20 1 FWD
00:50:56:89:6f:4a 4095 19 FWD
00:50:56:91:bb:89 20 24 FWD
00:50:56:91:bb:89 4095 19 FWD
00:50:56:93:1c:09 20 24 FWD
00:50:56:93:1c:09 4095 19 FWD
00:50:56:93:8c:f2 20 24 FWD
00:50:56:93:8c:f2 4095 19 FWD
00:50:56:bc:7b:57 20 4 FWD
00:50:56:bc:a7:23 20 4 FWD
00:50:56:bc:a7:23 4095 19 FWD
00:50:56:bd:e2:31 20 3 FWD
00:50:56:bd:e2:31 4095 19 FWD
d4:d7:48:17:45:19 1 24 FWD
d4:d7:48:17:45:19 10 24 FWD
d4:d7:48:17:45:19 17 24 FWD
d4:d7:48:17:45:19 20 24 FWD
d4:d7:48:17:45:1a 4095 19 FWD
802.1x Operational Info:
------------------------------------------------------------------
System capability : Authenticator
System status : disabled
Protocol version : 1
Authenticator Backend
Port Auth Mode Auth Status PAE State Auth State
---- ------------ ------------ -------------- ----------
1 force-auth unauthorized initialize initialize
2 force-auth unauthorized initialize initialize
3 force-auth unauthorized initialize initialize
4 force-auth unauthorized initialize initialize
5 force-auth unauthorized initialize initialize
6 force-auth unauthorized initialize initialize
7 force-auth unauthorized initialize initialize
8 force-auth unauthorized initialize initialize
9 force-auth unauthorized initialize initialize
10 force-auth unauthorized initialize initialize
11 force-auth unauthorized initialize initialize
12 force-auth unauthorized initialize initialize
13 force-auth unauthorized initialize initialize
14 force-auth unauthorized initialize initialize
15 force-auth unauthorized initialize initialize
16 force-auth unauthorized initialize initialize
*17 force-auth unauthorized initialize initialize
*18 force-auth unauthorized initialize initialize
*20 force-auth unauthorized initialize initialize
*21 force-auth unauthorized initialize initialize
*22 force-auth unauthorized initialize initialize
*23 force-auth unauthorized initialize initialize
24 force-auth unauthorized initialize initialize
------------------------------------------------------------------
* - Port down or disabled
STP uplink fast mode : disabled
>> Layer 2#
[edit] iLO: SHOW ALL from command-line
Original configuration:
-----------------------------------------------------------------------------
WARNING: This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number: 1
OA Role: Active
OA-BYGGBLADE login:
HP Onboard Administrator booting...
HP Onboard Administrator
* **********
**** ***************
****** ******************
******** *********************
******** ***********************
******** ************************
******** ***** ****
********* **** **** **** *****
******** **** ***** ***** *****
******* **** ***** **** ******
******* **** ***** **** *******
****** **** **** **** *******
***** **** ***** ***** ********
*** **** ***** ********
***************** ****************
*************** ***************
************** ***************
*********** *************
******** ************
*** *********
[16]
Subsystems init:
[ 9]
Enabling protocols: telnet ssh http ntp
Onboard Administrator's static IP address is: 10.0.209.19
-----------------------------------------------------------------------------
WARNING: This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number: 1
OA Role: Active
OA-BYGGBLADE login:
-----------------------------------------------------------------------------
WARNING: This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number: 1
OA Role: Active
OA-BYGGBLADE login:
-----------------------------------------------------------------------------
WARNING: This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number: 1
OA Role: Active
OA-BYGGBLADE login:
HP Onboard Administrator booting...
Lost Password or Flash Recovery requested
Press L for Lost Password Recovery
Press F for Flash Recovery
Press any other key to reset
Booting in Lost Password Mode...
HP Onboard Administrator
* **********
**** ***************
****** ******************
******** *********************
******** ***********************
******** ************************
******** ***** ****
********* **** **** **** *****
******** **** ***** ***** *****
******* **** ***** **** ******
******* **** ***** **** *******
****** **** **** **** *******
***** **** ***** ***** ********
*** **** ***** ********
***************** ****************
*************** ***************
************** ***************
*********** *************
******** ************
*** *********
Subsystems init:
[16] dministrator password reset to: JUFBSWIX
[ 9]
Enabling protocols: telnet ssh http ntp
Onboard Administrator's static IP address is: 10.0.209.19
-----------------------------------------------------------------------------
WARNING: This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number: 1
OA Role: Active
OA-BYGGBLADE login: root
Password:
Login incorrect
OA-BYGGBLADE login: administrator
Password:
Login incorrect
OA-BYGGBLADE login: admin
Password:
Login incorrect
-----------------------------------------------------------------------------
WARNING: This is a private system. Do not attempt to login unless you are an
authorized user. Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------
Firmware Version: 3.71
Built: 12/07/2012 @ 13:26
OA Bay Number: 1
OA Role: Active
OA-BYGGBLADE login: Administrator
Password:
HP BladeSystem Onboard Administrator
(C) Copyright 2006-2012 Hewlett-Packard Development Company, L.P.
Type 'HELP' to display a list of valid commands.
Type 'HELP <command>' to display detailed information about a specific command.
Type 'HELP HELP' to display more detailed information about the help system.
OA-BYGGBLADE> help
ADD ASSIGN CLEAR CONNECT DISABLE DISCOVER DOWNLOAD EDIT ENABLE EXIT FORCE
GENERATE HELP HISTORY HPONCFG LOGOUT PING POWEROFF POWERON QUIT REBOOT REMOVE
RESTART SAVE SEND SET SHOW SLEEP TEST UNASSIGN UPDATE UPLOAD
OA-BYGGBLADE> help show
SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }
OA-BYGGBLADE> SET IPCONFIG STATIC 1 192.168.16.16 255.255.255.0
Static IP settings successfully updated.
These setting changes will take effect immediately.
OA-BYGGBLADE> show ip
Invalid Arguments
SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }
OA-BYGGBLADE> show ipconfig
Invalid Arguments
SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }
OA-BYGGBLADE> show ipconfig 1
Invalid Arguments
SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }
OA-BYGGBLADE> help show
SHOW { ALL | CA | CONFIG | DATE | DEVICE | DISPLAY EVENT(S) | EBIPA | ENCLOSURE
| ENCRYPTION | FIPS MODE | FIRMWARE MANAGEMENT | FRU | HEALTH | HPSIM INFO |
INTERCONNECT | LDAP | LOGIN_BANNER | NETWORK | OA | PASSWORD SETTINGS | POWER |
RACK | REMOTE_SUPPORT | SERVER | SESSION TIMEOUT | SNMP | SOLUTIONSID |
SSHFINGERPRINT | SSHKEY | SYSLOG | TOPOLOGY | TWOFACTOR | UPDATE | URB | USBKEY
| USER | VCMODE | VLAN }
OA-BYGGBLADE> show all
>SHOW HEALTH
Enclosure Health:
Enclosure: Degraded
Power Subsystem: Degraded
Cooling Subsystem: OK
Blade Health:
Bay Status Problem Corrective Action
--- -------------------- ---------------------- --------------------------------
1 Absent
2 Error Missing Device This device needs a partner
blade in order to function
properly. The partner device
must be installed adjacent to
this device and within the same
partition indicated by the
dividers.
3 Absent
4 Absent
5 Absent
6 Absent
7 Absent
8 Absent
Interconnect Health:
Bay Status Problem Corrective Action
--- -------------------- ---------------------- --------------------------------
1 OK
2 OK
3 Absent
4 Absent
Power Supply Health:
Bay Status Problem Corrective Action
--- -------------------- ---------------------- --------------------------------
1 Error Power Cord The pwr cord of power supplies
is unplugged or loose. Please
plug in all pwr cords to the
available power supplies.
2 OK
3 Absent
4 Error Power Cord The pwr cord of power supplies
is unplugged or loose. Please
plug in all pwr cords to the
available power supplies.
5 OK
6 Absent
Fan Health:
Bay Status Problem Corrective Action
--- -------------------- ---------------------- --------------------------------
1 OK
2 OK
3 OK
4 OK
5 OK
6 OK
Onboard Administrator Health:
Bay Status Problem Corrective Action
--- -------------------- ---------------------- --------------------------------
1 OK
>SHOW CONFIG
#Script Generated by Administrator
#Generated on: Thu Oct 15 09:16:29 2015
#Set Enclosure Time
SET TIMEZONE Etc/GMT+1
#SET DATE MMDDhhmm{{CC}YY}
#Set Enclosure Information
SET ENCLOSURE ASSET TAG ""
SET ENCLOSURE NAME "CZC8383004"
SET RACK NAME "ByggBlade"
SET POWER MODE REDUNDANT
SET POWER SAVINGS ON
#Power limit must be within the range of 950-8750
SET POWER LIMIT OFF
#Enclosure Dynamic Power Cap must be within the range of 820-1459
#Derated Circuit Capacity must be within the range of 820-1459
#Rated Circuit Capacity must be within the range of 820-1459
SET ENCLOSURE POWER_CAP OFF
SET ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE None
#Set PowerDelay Information
SET INTERCONNECT POWERDELAY 1 0
SET INTERCONNECT POWERDELAY 2 0
SET INTERCONNECT POWERDELAY 3 0
SET INTERCONNECT POWERDELAY 4 0
SET SERVER POWERDELAY 1 0
SET SERVER POWERDELAY 2 0
SET SERVER POWERDELAY 3 0
SET SERVER POWERDELAY 4 0
SET SERVER POWERDELAY 5 0
SET SERVER POWERDELAY 6 0
SET SERVER POWERDELAY 7 0
SET SERVER POWERDELAY 8 0
SET SERVER POWERDELAY 1A 0
SET SERVER POWERDELAY 2A 0
SET SERVER POWERDELAY 3A 0
SET SERVER POWERDELAY 4A 0
SET SERVER POWERDELAY 5A 0
SET SERVER POWERDELAY 6A 0
SET SERVER POWERDELAY 7A 0
SET SERVER POWERDELAY 8A 0
SET SERVER POWERDELAY 1B 0
SET SERVER POWERDELAY 2B 0
SET SERVER POWERDELAY 3B 0
SET SERVER POWERDELAY 4B 0
SET SERVER POWERDELAY 5B 0
SET SERVER POWERDELAY 6B 0
SET SERVER POWERDELAY 7B 0
SET SERVER POWERDELAY 8B 0
#Configure Protocols
ENABLE WEB
ENABLE SECURESH
ENABLE TELNET
ENABLE XMLREPLY
DISABLE GUI_LOGIN_DETAIL
ENABLE ACTIVE_HEALTH_SYSTEM
#Configure Alertmail
SET ALERTMAIL SMTPSERVER 0.0.0.0
DISABLE ALERTMAIL
#Configure Trusted Hosts
#REMOVE TRUSTED HOST ALL
DISABLE TRUSTED HOST
#Configure NTP
SET NTP PRIMARY 192.36.144.22
SET NTP SECONDARY 192.36.143.151
SET NTP POLL 720
ENABLE NTP
#Set SNMP Information
SET SNMP CONTACT ""
SET SNMP LOCATION ""
SET SNMP COMMUNITY READ "public"
SET SNMP COMMUNITY WRITE ""
DISABLE SNMP
#Set Remote Syslog Information
SET REMOTE SYSLOG SERVER ""
SET REMOTE SYSLOG PORT 514
DISABLE SYSLOG REMOTE
#Set Enclosure Bay IP Addressing (EBIPA) Information for Device Bays
#NOTE: SET EBIPA commands are only valid for OA v3.00 and later
SET EBIPA SERVER 10.0.209.83 255.255.255.0 1
SET EBIPA SERVER GATEWAY 10.0.209.1 1
SET EBIPA SERVER DOMAIN "byggtjanst.local" 1
ADD EBIPA SERVER DNS 10.0.209.30 1
ADD EBIPA SERVER DNS 10.0.209.31 1
ENABLE EBIPA SERVER 1
SET EBIPA SERVER NONE NONE 1A
SET EBIPA SERVER GATEWAY 10.0.209.1 1A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 1A
ADD EBIPA SERVER DNS 10.0.209.30 1A
ADD EBIPA SERVER DNS 10.0.209.31 1A
DISABLE EBIPA SERVER 1A
SET EBIPA SERVER NONE NONE 1B
SET EBIPA SERVER GATEWAY 10.0.209.1 1B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 1B
ADD EBIPA SERVER DNS 10.0.209.30 1B
ADD EBIPA SERVER DNS 10.0.209.31 1B
DISABLE EBIPA SERVER 1B
SET EBIPA SERVER NONE NONE 2
SET EBIPA SERVER GATEWAY 10.0.209.1 2
SET EBIPA SERVER DOMAIN "byggtjanst.local" 2
ADD EBIPA SERVER DNS 10.0.209.30 2
ADD EBIPA SERVER DNS 10.0.209.31 2
DISABLE EBIPA SERVER 2
SET EBIPA SERVER NONE NONE 2A
SET EBIPA SERVER GATEWAY 10.0.209.1 2A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 2A
ADD EBIPA SERVER DNS 10.0.209.30 2A
ADD EBIPA SERVER DNS 10.0.209.31 2A
DISABLE EBIPA SERVER 2A
SET EBIPA SERVER NONE NONE 2B
SET EBIPA SERVER GATEWAY 10.0.209.1 2B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 2B
ADD EBIPA SERVER DNS 10.0.209.30 2B
ADD EBIPA SERVER DNS 10.0.209.31 2B
DISABLE EBIPA SERVER 2B
SET EBIPA SERVER NONE NONE 3
SET EBIPA SERVER GATEWAY 10.0.209.1 3
SET EBIPA SERVER DOMAIN "byggtjanst.local" 3
ADD EBIPA SERVER DNS 10.0.209.30 3
ADD EBIPA SERVER DNS 10.0.209.31 3
DISABLE EBIPA SERVER 3
SET EBIPA SERVER NONE NONE 3A
SET EBIPA SERVER GATEWAY 10.0.209.1 3A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 3A
ADD EBIPA SERVER DNS 10.0.209.30 3A
ADD EBIPA SERVER DNS 10.0.209.31 3A
DISABLE EBIPA SERVER 3A
SET EBIPA SERVER NONE NONE 3B
SET EBIPA SERVER GATEWAY 10.0.209.1 3B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 3B
ADD EBIPA SERVER DNS 10.0.209.30 3B
ADD EBIPA SERVER DNS 10.0.209.31 3B
DISABLE EBIPA SERVER 3B
SET EBIPA SERVER NONE NONE 4
SET EBIPA SERVER GATEWAY 10.0.209.1 4
SET EBIPA SERVER DOMAIN "byggtjanst.local" 4
ADD EBIPA SERVER DNS 10.0.209.30 4
ADD EBIPA SERVER DNS 10.0.209.31 4
DISABLE EBIPA SERVER 4
SET EBIPA SERVER NONE NONE 4A
SET EBIPA SERVER GATEWAY 10.0.209.1 4A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 4A
ADD EBIPA SERVER DNS 10.0.209.30 4A
ADD EBIPA SERVER DNS 10.0.209.31 4A
DISABLE EBIPA SERVER 4A
SET EBIPA SERVER NONE NONE 4B
SET EBIPA SERVER GATEWAY 10.0.209.1 4B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 4B
ADD EBIPA SERVER DNS 10.0.209.30 4B
ADD EBIPA SERVER DNS 10.0.209.31 4B
DISABLE EBIPA SERVER 4B
SET EBIPA SERVER 10.0.209.85 255.255.255.0 5
SET EBIPA SERVER GATEWAY 10.0.209.1 5
SET EBIPA SERVER DOMAIN "byggtjanst.local" 5
ADD EBIPA SERVER DNS 10.0.209.30 5
ADD EBIPA SERVER DNS 10.0.209.31 5
ENABLE EBIPA SERVER 5
SET EBIPA SERVER NONE NONE 5A
SET EBIPA SERVER GATEWAY 10.0.209.1 5A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 5A
ADD EBIPA SERVER DNS 10.0.209.30 5A
ADD EBIPA SERVER DNS 10.0.209.31 5A
DISABLE EBIPA SERVER 5A
SET EBIPA SERVER NONE NONE 5B
SET EBIPA SERVER GATEWAY 10.0.209.1 5B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 5B
ADD EBIPA SERVER DNS 10.0.209.30 5B
ADD EBIPA SERVER DNS 10.0.209.31 5B
DISABLE EBIPA SERVER 5B
SET EBIPA SERVER NONE NONE 6
SET EBIPA SERVER GATEWAY 10.0.209.1 6
SET EBIPA SERVER DOMAIN "byggtjanst.local" 6
ADD EBIPA SERVER DNS 10.0.209.30 6
ADD EBIPA SERVER DNS 10.0.209.31 6
DISABLE EBIPA SERVER 6
SET EBIPA SERVER NONE NONE 6A
SET EBIPA SERVER GATEWAY 10.0.209.1 6A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 6A
ADD EBIPA SERVER DNS 10.0.209.30 6A
ADD EBIPA SERVER DNS 10.0.209.31 6A
DISABLE EBIPA SERVER 6A
SET EBIPA SERVER NONE NONE 6B
SET EBIPA SERVER GATEWAY 10.0.209.1 6B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 6B
ADD EBIPA SERVER DNS 10.0.209.30 6B
ADD EBIPA SERVER DNS 10.0.209.31 6B
DISABLE EBIPA SERVER 6B
SET EBIPA SERVER NONE NONE 7
SET EBIPA SERVER GATEWAY 10.0.209.1 7
SET EBIPA SERVER DOMAIN "byggtjanst.local" 7
ADD EBIPA SERVER DNS 10.0.209.30 7
ADD EBIPA SERVER DNS 10.0.209.31 7
DISABLE EBIPA SERVER 7
SET EBIPA SERVER NONE NONE 7A
SET EBIPA SERVER GATEWAY 10.0.209.1 7A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 7A
ADD EBIPA SERVER DNS 10.0.209.30 7A
ADD EBIPA SERVER DNS 10.0.209.31 7A
DISABLE EBIPA SERVER 7A
SET EBIPA SERVER NONE NONE 7B
SET EBIPA SERVER GATEWAY 10.0.209.1 7B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 7B
ADD EBIPA SERVER DNS 10.0.209.30 7B
ADD EBIPA SERVER DNS 10.0.209.31 7B
DISABLE EBIPA SERVER 7B
SET EBIPA SERVER NONE NONE 8
SET EBIPA SERVER GATEWAY 10.0.209.1 8
SET EBIPA SERVER DOMAIN "byggtjanst.local" 8
ADD EBIPA SERVER DNS 10.0.209.30 8
ADD EBIPA SERVER DNS 10.0.209.31 8
DISABLE EBIPA SERVER 8
SET EBIPA SERVER NONE NONE 8A
SET EBIPA SERVER GATEWAY 10.0.209.1 8A
SET EBIPA SERVER DOMAIN "byggtjanst.local" 8A
ADD EBIPA SERVER DNS 10.0.209.30 8A
ADD EBIPA SERVER DNS 10.0.209.31 8A
DISABLE EBIPA SERVER 8A
SET EBIPA SERVER NONE NONE 8B
SET EBIPA SERVER GATEWAY 10.0.209.1 8B
SET EBIPA SERVER DOMAIN "byggtjanst.local" 8B
ADD EBIPA SERVER DNS 10.0.209.30 8B
ADD EBIPA SERVER DNS 10.0.209.31 8B
DISABLE EBIPA SERVER 8B
#Set Enclosure Bay IP Addressing (EBIPA) Information for Interconnect Bays
#NOTE: SET EBIPA commands are only valid for OA v3.00 and later
SET EBIPA INTERCONNECT 10.0.209.68 255.255.255.0 1
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 1
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 1
ADD EBIPA INTERCONNECT DNS 10.0.209.30 1
ADD EBIPA INTERCONNECT DNS 10.0.209.31 1
SET EBIPA INTERCONNECT NTP PRIMARY NONE 1
SET EBIPA INTERCONNECT NTP SECONDARY NONE 1
ENABLE EBIPA INTERCONNECT 1
SET EBIPA INTERCONNECT NONE NONE 2
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 2
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 2
ADD EBIPA INTERCONNECT DNS 10.0.209.30 2
ADD EBIPA INTERCONNECT DNS 10.0.209.31 2
SET EBIPA INTERCONNECT NTP PRIMARY NONE 2
SET EBIPA INTERCONNECT NTP SECONDARY NONE 2
DISABLE EBIPA INTERCONNECT 2
SET EBIPA INTERCONNECT NONE NONE 3
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 3
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 3
ADD EBIPA INTERCONNECT DNS 10.0.209.30 3
ADD EBIPA INTERCONNECT DNS 10.0.209.31 3
SET EBIPA INTERCONNECT NTP PRIMARY NONE 3
SET EBIPA INTERCONNECT NTP SECONDARY NONE 3
DISABLE EBIPA INTERCONNECT 3
SET EBIPA INTERCONNECT NONE NONE 4
SET EBIPA INTERCONNECT GATEWAY 10.0.209.1 4
SET EBIPA INTERCONNECT DOMAIN "byggtjanst.local" 4
ADD EBIPA INTERCONNECT DNS 10.0.209.30 4
ADD EBIPA INTERCONNECT DNS 10.0.209.31 4
SET EBIPA INTERCONNECT NTP PRIMARY NONE 4
SET EBIPA INTERCONNECT NTP SECONDARY NONE 4
DISABLE EBIPA INTERCONNECT 4
SAVE EBIPA
#Uncomment following line to remove all user accounts currently in the system
#REMOVE USERS ALL
#Create Users
ADD USER "Administrator"
SET USER CONTACT "Administrator" ""
SET USER FULLNAME "Administrator" "System Administrator"
SET USER ACCESS "Administrator" ADMINISTRATOR
ASSIGN SERVER 1,2,3,4,5,6,7,8,1A,2A,3A,4A,5A,6A,7A,8A,1B,2B,3B,4B,5B,6B,7B,8B "Administrator"
ASSIGN INTERCONNECT 1,2,3,4 "Administrator"
ASSIGN OA "Administrator"
ENABLE USER "Administrator"
#Password Settings
DISABLE STRONG PASSWORDS
SET MINIMUM PASSWORD LENGTH 3
#Session Timeout Settings
SET SESSION TIMEOUT 0
#Set LDAP Information
SET LDAP SERVER
SET LDAP PORT 0
SET LDAP NAME MAP OFF
SET LDAP SEARCH 1 ""
SET LDAP SEARCH 2 ""
SET LDAP SEARCH 3 ""
SET LDAP SEARCH 4 ""
SET LDAP SEARCH 5 ""
SET LDAP SEARCH 6 ""
#Uncomment following line to remove all LDAP accounts currently in the system
#REMOVE LDAP GROUP ALL
DISABLE LDAP
#Set SSO TRUST MODE
SET SSO TRUST Disabled
SET SERIAL BAUD 9600
#Set VLAN Information
SET VLAN FACTORY
SET VLAN DEFAULT 1
EDIT VLAN 1 "Default"
SET VLAN SERVER 1 1
SET VLAN SERVER 1 2
SET VLAN SERVER 1 3
SET VLAN SERVER 1 4
SET VLAN SERVER 1 5
SET VLAN SERVER 1 6
SET VLAN SERVER 1 7
SET VLAN SERVER 1 8
SET VLAN INTERCONNECT 1 1
SET VLAN INTERCONNECT 1 2
SET VLAN INTERCONNECT 1 3
SET VLAN INTERCONNECT 1 4
SET VLAN OA 1
DISABLE VLAN
SAVE VLAN
#Set URB Information
DISABLE URB
SET URB URL ""
SET URB PROXY URL ""
SET URB INTERVAL DAILY 0
SET SOLUTIONSID "0000000000000000"
#Set Login Banner Text Information
CLEAR LOGIN_BANNER_TEXT
DISABLE LOGIN_BANNER
#Set Firmware Management information
DISABLE FIRMWARE MANAGEMENT
SET FIRMWARE MANAGEMENT POLICY MANUAL
SET FIRMWARE MANAGEMENT POWER OFF
SET FIRMWARE MANAGEMENT SCHEDULE NONE
SET FIRWMARE MANAGEMENT BAYS_TO_INCLUDE SERVER NONE
#Set Remote Support Information
DISABLE REMOTE_SUPPORT
#Set Network Information
#NOTE: Setting your network information through a script while
# remotely accessing the server could drop your connection.
# If your connection is dropped this script may not execute to conclusion.
SET OA NAME 1 OA-BYGGBLADE
SET IPCONFIG STATIC 1 192.168.16.16 255.255.255.0 0.0.0.0 0.0.0.0 0.0.0.0
SET NIC AUTO 1
DISABLE ROUTER ADVERTISEMENTS
DISABLE DHCPV6
DISABLE IPV6
>SHOW DATE
Date: 2015-10-15T09:16:43-01:00
Time Zone: Etc/GMT+1
>SHOW DISPLAY EVENT
Display Events is set to OFF.
>SHOW EBIPA
EBIPA Device Server Settings
Bay Enabled EBIPA/Current Netmask Gateway DNS Domain
--- ------- --------------- --------------- --------------- --------------- ------
1 Yes 10.0.209.83 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
1A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
1B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
2 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
0.0.0.0 10.0.209.31
2A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
2B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
3 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
3A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
3B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
4 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
4A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
4B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
5 Yes 10.0.209.85 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
5A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
5B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
6 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
6A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
6B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
7 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
7A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
7B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
8 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
8A No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
8B No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
EBIPA Device Interconnect Settings
Bay Enabled EBIPA/Current Netmask Gateway DNS NTP Domain
--- ------- --------------- --------------- --------------- --------------- --------------- ------
1 Yes 10.0.209.68 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.68 10.0.209.31
2 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.41 10.0.209.31
3 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
4 No 255.255.255.0 10.0.209.1 10.0.209.30 byggtjanst.local
10.0.209.31
>SHOW ENCLOSURE FAN ALL
Fan #1 information:
Status: OK
Speed: 27 percent of Maximum speed
Maximum speed: 18000
Minimum speed: 10
Power consumed: 7
Product Name: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Version: 2.9
Diagnostic Status:
Internal Data OK
Location OK
Device Failure OK
Device Degraded OK
Missing Device OK
Fan #2 information:
Status: OK
Speed: 27 percent of Maximum speed
Maximum speed: 18000
Minimum speed: 10
Power consumed: 7
Product Name: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Version: 2.9
Diagnostic Status:
Internal Data OK
Location OK
Device Failure OK
Device Degraded OK
Missing Device OK
Fan #3 information:
Status: OK
Speed: 27 percent of Maximum speed
Maximum speed: 18000
Minimum speed: 10
Power consumed: 6
Product Name: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Version: 2.9
Diagnostic Status:
Internal Data OK
Location OK
Device Failure OK
Device Degraded OK
Missing Device OK
Fan #4 information:
Status: OK
Speed: 27 percent of Maximum speed
Maximum speed: 18000
Minimum speed: 10
Power consumed: 7
Product Name: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Version: 2.9
Diagnostic Status:
Internal Data OK
Location OK
Device Failure OK
Device Degraded OK
Missing Device OK
Fan #5 information:
Status: OK
Speed: 27 percent of Maximum speed
Maximum speed: 18000
Minimum speed: 10
Power consumed: 7
Product Name: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Version: 2.9
Diagnostic Status:
Internal Data OK
Location OK
Device Failure OK
Device Degraded OK
Missing Device OK
Fan #6 information:
Status: OK
Speed: 27 percent of Maximum speed
Maximum speed: 18000
Minimum speed: 10
Power consumed: 6
Product Name: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Version: 2.9
Diagnostic Status:
Internal Data OK
Location OK
Device Failure OK
Device Degraded OK
Missing Device OK
>SHOW ENCLOSURE INFO
Enclosure Information:
Enclosure Name: CZC8383004
Enclosure Type: BladeSystem c3000 Enclosure
Part Number: 437502-B21
Serial Number: CZC8383004
UUID: 09CZC8383004
Asset Tag:
Midplane Spare Part Number: 441829-001
Solutions ID: 0000000000000000
Power Distribution Unit:
[No PDU is present on c3000 enclosures]
Onboard Administrator Tray Information:
[No Tray Information is present on c3000 enclosures]
>SHOW ENCLOSURE LCD
Status : OK
Display : On
Name : BladeSystem c3000 Insight Display
Spare Part# : 441831-001
Manufacturer: HP
Fw Version : 2.2.2
Diagnostic Status:
Internal Data OK
>SHOW ENCLOSURE POWER_CAP
Enclosure Dynamic Power Cap: Disabled
Derated Circuit Capacity: Disabled
Rated Circuit Capacity: Disabled
Allowable Enclosure Dynamic Power Cap: 820 - 1459 Watts AC
Allowable Derated Circuit Capacity: 820 - 1459 Watts AC
Allowable Rated Circuit Capacity: 820 - 1459 Watts AC
>SHOW ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE
Bays opted out: None
>SHOW ENCLOSURE POWERSUPPLY ALL
Power Supply #1 Information:
Status: Failed
AC Input Status: Failed
Capacity: 0 Watts
Current Power Output: 0 Watts
Serial Number: 531290A4DW650P
Product Name: HP PROLIANT SERVER PS
Part Number: 437572-B21
Spare Part Number: 441830-001
Product Ver: 01
Diagnostic Status:
Device Failure Failed
Power Cord Failed
Power Supply #2 Information:
Status: OK
AC Input Status: OK
Capacity: 1200 Watts
Current Power Output: 30 Watts
Serial Number: 531290A4DW96UL
Product Name: HP PROLIANT SERVER PS
Part Number: 437572-B21
Spare Part Number: 441830-001
Product Ver: 01
Diagnostic Status:
Internal Data OK
Device Failure OK
Power Cord OK
Power Supply #3 Information:
Status: Power Supply Bay Empty
Power Supply #4 Information:
Status: Failed
AC Input Status: Failed
Capacity: 0 Watts
Current Power Output: 0 Watts
Serial Number: 531290A4DWJ1NR
Product Name: HP PROLIANT SERVER PS
Part Number: 437572-B21
Spare Part Number: 441830-001
Product Ver: 01
Diagnostic Status:
Device Failure Failed
Power Cord Failed
Power Supply #5 Information:
Status: OK
AC Input Status: OK
Capacity: 1200 Watts
Current Power Output: 38 Watts
Serial Number: 531290A4DW96UN
Product Name: HP PROLIANT SERVER PS
Part Number: 437572-B21
Spare Part Number: 441830-001
Product Ver: 01
Diagnostic Status:
Internal Data OK
Device Failure OK
Power Cord OK
Power Supply #6 Information:
Status: Power Supply Bay Empty
>SHOW ENCLOSURE POWER_SUMMARY
Enclosure Bay Output Allocation:
Bay Power Allocated (Watts DC)
------------- --------------------------
Devices 0
Interconnects + 60
Fans + 480
-------
= 540
Enclosure Output Power Summary:
Enclosure Watts DC
---------------- --------
Power Capacity 1200
Power Allocation - 540
Power Available = 660
Enclosure Input Power Summary:
Enclosure Watts AC
----------------- --------
Present Power 181
Max Input Power 1459
Dynamic Power Cap Not Set
Power Limit Not Set
Device Bay Power Summary:
Power Allocated
Bay Name (Watts DC)
--- ------------------- ---------------
2 HP StorageWorks SB4 0
-------
= 0
Interconnect Bay Power Summary:
Bay Name Power Allocated (Watts DC)
--- -------------------------------- --------------------------
1 GbE2c Ethernet Blade Switch 25
2 Brocade 4/12 SAN Switch for HP 35
-------
= 60
Fan Power Summary:
Total Fans Fan Rule Present Power Power Allocated
(Number of Fans) (Number of Fans) (Watts DC) (Watts DC)
---------------- ---------------- -------------- ---------------
6 4 40 480
>SHOW ENCLOSURE STATUS
Enclosure:
Status: Degraded
Unit Identification LED: Off
Diagnostic Status:
Internal Data OK
Onboard Administrator:
Status: OK
Power Subsystem:
Status: Degraded
Power Mode: Redundant
Redundancy State: Redundant
Power Capacity: 1200 Watts DC
Power Available: 660 Watts DC
Present Power: 181 Watts AC
Cooling Subsystem:
Status: OK
Fans Good/Wanted/Needed: 6/4/3
Fan 1: 5001 RPM (28%)
Fan 2: 4999 RPM (28%)
Fan 3: 5001 RPM (28%)
Fan 4: 5000 RPM (28%)
Fan 5: 5000 RPM (28%)
Fan 6: 5000 RPM (28%)
>SHOW ENCLOSURE TEMP
Locale Bay # Temp Status Temp Caution Critical
---------------------- ----- ----------- -------- ------- --------
Enclosure N/A 25C/ 77F --- ---
Onboard Administrator 1 OK 25C/ 77F 75C 80C
Blade Bay 2 N/A 0C/ 32F 45C 60C
Interconnect Module 1 OK ---- --- ---
Interconnect Module 2 OK ---- --- ---
>SHOW FIPS MODE
FIPS Mode is Off
>SHOW OA INFO
Onboard Administrator #1 information:
Product Name : BladeSystem c3000 Onboard Administrator
Part Number : 448589-B21
Spare Part No.: 441832-001
Serial Number : P3059%%9VW909F
UUID : 18P3059%%9VW909F
Manufacturer : HP
Firmware Ver. : 3.71 Dec 07 2012
Hw Board Type : 1
Hw Version : %%
Loader Version: U-Boot 1.1.1 (Aug 21 2007 - 09:51:44)
Serial Port:
Baud Rate : 9600
Parity : None
Data bits : 8
Stop bits : 1
Flow control: None
>SHOW OA NETWORK
Enclosure Network Settings:
- - - - - IPv6 Information - - - - -
IPv6: Disabled
DHCPv6: Disabled
Router Advertisement: Disabled
Onboard Administrator #1 Network Information:
Name: OA-BYGGBLADE
- - - - - IPv4 Information - - - - -
DHCP: Disabled
IPv4 Address: 192.168.16.16
Netmask: 255.255.255.0
Gateway Address: 0.0.0.0
- - - - - IPv6 Information - - - - -
Static Address: Not Set
Static IPv6 DNS 1: Not Set
Static IPv6 DNS 2: Not Set
- - - - - General Information - - - - -
Active DNS Addresses:
Primary: Not Set
Secondary: Not Set
Tertiary: Not Set
MAC Address: 00:1F:29:E7:24:0D
Link Settings: Auto-Negotiation, 10 Mbps, Half Duplex
Link Status: Not Active
Enclosure IP Mode: Not Supported
>SHOW OA STATUS ALL
Onboard Administrator #1 Status:
Name: OA-BYGGBLADE
Role: Active
UID: Off
Status: OK
>SHOW OA UPTIME ALL
Onboard Administrator #1:
Role : Active
Uptime : 0 days, 0 hours, 24 min
CPU Load : 0.12, 0.20, 0.18
>SHOW OA CERTIFICATE
Onboard Administrator #1 Certificate Information:
Issued by: CZC8383004
Valid from: 2006-09-06T00:18:19Z
Valid until: 2016-09-03T00:18:19Z
Serial Number: C8:88:B2:68:A1:8E:2B:CE
Version: 1
MD5 Fingerprint: 09:2B:D0:D4:70:8E:5F:C0:71:D1:B7:37:C9:D2:8A:97
SHA1 Fingerprint: 54:CE:1D:C6:B0:3E:02:CD:06:98:88:BC:93:87:B7:CA:2E:46:7C:29
Public Key: RSA (1024 Bits)
Subject:
Common Name (CN): CZC8383004
Country (C):
State or Province (ST):
City or Locality (L):
Organization Name (0): Hewlett-Packard
Organizational Unit: Onboard Administrator
>SHOW SYSLOG OA 1
Mar 10 13:44:40 OA: Blade 3 is reporting nominal health status.
Mar 10 13:44:40 OA: Blade in bay #3 status changed to OK
Mar 10 13:44:52 Kernel: usb 2-2: device descriptor read/64, error -71
Mar 10 13:44:54 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Mar 10 13:44:56 OA: Internal health status of interconnect in bay 2 changed to OK
Mar 10 13:44:59 OA: Device 3 power delayed until device settings are updated.
Mar 10 13:45:12 OA: Blade removed from bay 3
Mar 10 13:47:41 OA: Blade in bay #6 status changed to OK
Mar 10 13:51:43 OA: Blade in bay #6 status changed to OK
Mar 26 09:00:39 OA: Administrator logged into the Onboard Administrator from 10.0.209.187
Mar 26 09:14:16 OA: Blade in bay 6 has been powered down
Mar 26 09:14:21 OA: Blade removed from bay 6
Mar 26 11:54:05 OA: Administrator logged into the Onboard Administrator from 10.0.209.187
Mar 28 09:10:31 OA: Administrator logged into the Onboard Administrator from 10.0.209.136
Mar 28 09:26:27 OA: Administrator logged into the Onboard Administrator from 10.0.209.136
Mar 28 10:36:18 OA: Administrator logged into the Onboard Administrator from 10.0.209.135
Mar 31 06:32:25 OA: Authentication failure for user admin from 10.0.209.204, requesting web service
Mar 31 06:32:41 OA: Administrator logged into the Onboard Administrator from 10.0.209.204
Apr 15 16:27:39 OA: Blade in bay 1 has been powered down
Apr 15 16:27:39 OA: Blade in bay 2 has been powered down
Apr 15 16:27:48 OA: Blade 2 found a partner device.
Apr 15 16:27:48 OA: Blade 1 found a partner device.
Apr 15 16:27:48 OA: Blade 2 properly partners with its neighbor.
Apr 15 16:27:48 OA: Blade 1 properly partners with its neighbor.
Apr 15 16:27:48 OA: Blade in bay 2 has been powered on
Apr 15 16:27:49 OA: Blade in bay #2 status changed from Degraded to OK
Apr 15 19:01:53 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 640W DC, Present Power: 76W AC.
Apr 15 19:01:53 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Apr 15 19:02:22 OA: PS Status Changed: Bay #1 From: unknown To: failed
Apr 15 19:02:22 OA: PS Status Changed: Bay #2 From: unknown To: failed
Apr 15 19:03:10 NTP: Failed to update time/date using NTP
Apr 15 19:50:33 Kernel: Network link is down
Apr 15 22:09:17 Kernel: Network link is up at 100Mbps - Full Duplex
Apr 15 22:09:21 OA: Time zone changed to GMT+1
Apr 15 22:09:23 OA: Blade in bay #1 status changed to Unknown
Apr 15 22:09:23 OA: Blade in bay #2 status changed to Unknown
Apr 15 22:09:23 OA: LCD Status is: OK.
Apr 15 22:09:24 OA: Blade in bay #2 status changed to OK
Apr 15 22:09:24 OA: Blade 1 is reporting nominal health status.
Apr 15 22:09:24 OA: Blade in bay #1 status changed to OK
Apr 15 22:09:27 Enclosure-Link: Service started
Apr 15 22:09:27 OA: Device 2 power delayed during device discovery.
Apr 15 22:09:28 NTP: Failed to update time/date using NTP
Apr 15 22:09:32 OA: Device 1 power delayed during device discovery.
Apr 15 22:09:33 Enclosure-Link: Initial topology scan completed successfully
Apr 15 22:09:37 OA: Onboard Administrator booted successfully
Apr 15 22:09:44 OA: HTTP server is up
Apr 15 22:10:09 NTP: Successfully updated time/date using NTP
Apr 15 22:10:16 OA: VLAN is disabled
Apr 15 22:10:25 OA: Blade in bay #1 status changed to OK
Apr 15 22:10:28 OA: Blade 2 found a partner device.
Apr 15 22:10:28 OA: Blade 1 found a partner device.
Apr 15 22:10:28 OA: Blade 2 properly partners with its neighbor.
Apr 15 22:10:28 OA: Blade 1 properly partners with its neighbor.
Apr 15 22:10:28 OA: Blade 2 is properly cooled.
Apr 15 22:10:28 OA: Blade in bay 2 has been powered on
Apr 15 22:10:28 OA: Blade 2 is reporting nominal health status.
Apr 15 22:10:41 OA: Blade 1 is properly cooled.
Apr 15 22:10:41 OA: Blade in bay 1 has been powered on
Apr 15 22:11:12 OA: Internal health status of interconnect in bay 2 changed to OK
May 12 12:03:37 Kernel: hub 4-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
May 12 12:03:40 Kernel: hub 4-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
May 12 12:03:43 Kernel: hub 4-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
May 12 12:03:46 Kernel: hub 4-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jul 27 10:22:00 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 956W DC, Present Power: 250W AC.
Jul 27 10:22:00 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Jul 27 10:22:00 OA: PS Subsystem N + N Redundancy - REPAIRED
Jul 27 10:22:00 OA: Enclosure Status changed from Degraded to OK.
Jul 31 20:07:52 Kernel: usb 2-2: device descriptor read/64, error -110
Jul 31 20:07:54 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jul 31 20:07:55 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jul 31 20:07:56 Kernel: usb 2-2: device descriptor read/8, error -71
Jul 31 20:07:56 Kernel: usb 2-2: device descriptor read/8, error -71
Jul 31 20:07:56 Kernel: usb 2-2: device not accepting address 7, error -71
Aug 6 04:44:07 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 6 04:44:12 Kernel: usb 2-2: device descriptor read/64, error -71
Aug 6 04:44:13 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Aug 6 04:44:14 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 6 04:44:14 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 6 04:44:17 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 6 04:44:17 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 6 23:11:54 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 6 23:12:10 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 6 23:12:13 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 6 23:12:28 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 6 23:12:33 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 6 23:12:34 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 6 23:12:37 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 6 23:12:37 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 7 03:25:01 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 956W DC, Present Power: 250W AC.
Aug 7 03:25:01 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Aug 7 03:25:08 OA: PS Subsystem N + N Redundancy - REPAIRED
Aug 7 03:25:08 OA: Enclosure Status changed from Degraded to OK.
Aug 7 03:52:08 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 7 03:52:23 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 7 03:52:26 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 7 03:52:37 Kernel: usb 2-2: device descriptor read/64, error -71
Aug 7 03:52:42 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 7 03:52:47 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 7 03:52:52 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 7 03:52:56 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 8 04:37:49 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 8 04:38:04 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 8 04:38:08 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 8 04:38:23 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 8 04:38:28 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 8 04:38:33 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 8 04:38:39 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 8 04:38:44 Kernel: usb 2-2: device descriptor read/8, error -110
Aug 9 05:54:25 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Aug 9 05:54:28 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Aug 9 05:54:31 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 9 05:54:35 Kernel: hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Aug 9 05:54:38 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 9 05:54:42 Kernel: usb 2-2: device descriptor read/8, error -71
Aug 9 05:54:43 Kernel: usb 2-2: device not accepting address 29, error -71
Aug 9 06:56:39 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 9 06:56:44 Kernel: usb 2-2: device descriptor read/64, error -110
Aug 9 06:56:54 Kernel: usb 2-2: device descriptor read/64, error -71
Aug 9 06:56:59 Kernel: usb 2-2: device descriptor read/64, error -110
Sep 21 12:52:50 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 956W DC, Present Power: 235W AC.
Sep 21 12:52:50 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Sep 21 12:52:57 OA: PS Subsystem N + N Redundancy - REPAIRED
Sep 21 12:52:57 OA: Enclosure Status changed from Degraded to OK.
Oct 9 13:23:42 OA: Authentication failure for user admin from 10.0.209.153, requesting web service
Oct 9 13:23:55 OA: Administrator logged into the Onboard Administrator from 10.0.209.153
Oct 14 06:32:59 OA: Authentication failure for user administrator from 10.0.209.212, requesting web service
Oct 14 06:33:11 OA: Administrator logged into the Onboard Administrator from 10.0.209.212
Nov 13 14:01:14 OA: Authentication failure for user admin from 10.0.209.95, requesting web service
Nov 13 14:01:24 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 16 18:05:02 OA: Administrator logged into the Onboard Administrator from 10.0.210.240
Nov 16 18:20:57 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 16 18:32:57 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 17 11:41:04 OA: Authentication failure for user administrator from 10.0.209.95, requesting web service
Nov 17 12:13:52 OA: Authentication failure for user Administrator from 10.0.209.95, requesting web service
Nov 17 12:14:00 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 19 13:53:33 OA: Authentication failure for user admin from 10.0.210.106, requesting web service
Nov 19 13:53:44 OA: Authentication failure for user Admin from 10.0.210.106, requesting web service
Nov 19 13:53:53 OA: Administrator logged into the Onboard Administrator from 10.0.210.106
Nov 19 15:02:44 OA: Authentication failure for user admin from 10.0.209.95, requesting web service
Nov 19 15:02:56 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 20 19:59:20 OA: Authentication failure for user admin from 10.0.209.95, requesting web service
Nov 20 19:59:34 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 20 20:09:52 OA: Administrator logged out of the Onboard Administrator
Nov 28 08:42:40 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 28 08:45:15 OA: Blade in bay 1 has been powered down
Nov 28 08:45:15 OA: Blade in bay 2 has been powered down
Nov 28 08:45:21 OA: Blade 2 found a partner device.
Nov 28 08:45:21 OA: Blade 1 found a partner device.
Nov 28 08:45:21 OA: Blade 2 properly partners with its neighbor.
Nov 28 08:45:21 OA: Blade 1 properly partners with its neighbor.
Nov 28 08:45:21 OA: Blade in bay 2 has been powered on
Nov 28 08:50:18 OA: Onboard Administrator in bay 1 was restarted by user Administrator.
Nov 28 08:50:24 OA: Onboard Administrator is rebooting
Nov 28 08:51:22 Kernel: Network link is up at 100Mbps - Full Duplex
Nov 28 08:51:25 OA: Time zone changed to GMT+1
Nov 28 08:51:27 OA: Blade in bay #1 status changed to Unknown
Nov 28 08:51:27 OA: Blade in bay #2 status changed to Unknown
Nov 28 08:51:28 OA: LCD Status is: OK.
Nov 28 08:51:28 OA: Blade 1 is reporting nominal health status.
Nov 28 08:51:29 OA: Blade in bay #1 status changed to OK
Nov 28 08:51:31 Enclosure-Link: Service started
Nov 28 08:51:38 NTP: Successfully updated time/date using NTP
Nov 28 08:51:42 Enclosure-Link: Initial topology scan completed successfully
Nov 28 08:51:47 OA: Onboard Administrator booted successfully
Nov 28 08:51:49 OA: Fan Removed: Bay #3
Nov 28 08:51:53 OA: Fan Inserted: Bay #3
Nov 28 08:51:54 OA: HTTP server is up
Nov 28 08:51:59 OA: Blade 2 is reporting nominal health status.
Nov 28 08:52:00 OA: Blade in bay #2 status changed to OK
Nov 28 08:52:03 OA: Blade in bay #1 status changed to OK
Nov 28 08:52:27 OA: VLAN is disabled
Nov 28 08:54:02 OA: Authentication failure for user administrator from 10.0.209.95, requesting web service
Nov 28 08:54:18 OA: Administrator logged into the Onboard Administrator from 10.0.209.95
Nov 28 09:21:38 Kernel: Network link is down
Nov 28 09:28:09 NTP: Failed to update time/date using NTP
Nov 28 09:45:24 OA: PS Removed: Bay #2
Nov 28 09:45:49 OA: Server Power Reduction - Activated
Nov 28 09:45:50 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 640W DC, Present Power: 70W AC.
Nov 28 09:45:50 OA: Enclosure Status changed from OK to Failed. (Power Subsystem)
Nov 28 09:46:14 OA: PS Status Changed: Bay #4 From: unknown To: failed
Nov 28 09:46:14 OA: PS Status Changed: Bay #5 From: unknown To: failed
Oct 15 07:59:39 Kernel: Network link is down
Oct 15 07:59:53 OA: Time zone changed to GMT+1
Oct 15 07:59:55 OA: Blade in bay #2 status changed to Unknown
Oct 15 07:59:56 OA: Device 2 power delayed during device discovery.
Oct 15 07:59:56 OA: LCD Status is: OK.
Oct 15 07:59:57 OA: Blade in bay #2 status changed to OK
Oct 15 07:59:59 Enclosure-Link: Service started
Oct 15 08:00:05 Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:00:06 OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:00:06 OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:00:06 OA: HTTP server is up
Oct 15 08:00:10 OA: Onboard Administrator booted successfully
Oct 15 08:00:16 OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:00:16 OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:00:16 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:00:47 OA: VLAN is disabled
Oct 15 08:01:45 OA: Internal health status of interconnect in bay 2 changed to OK
Oct 15 08:05:30 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 540W DC, Present Power: 118W AC.
Oct 15 08:37:14 Kernel: Network link is down
Oct 15 08:37:28 OA: Time zone changed to GMT+1
Oct 15 08:37:30 OA: Blade in bay #2 status changed to Unknown
Oct 15 08:37:30 OA: Device 2 power delayed during device discovery.
Oct 15 08:37:31 OA: LCD Status is: OK.
Oct 15 08:37:32 OA: Blade in bay #2 status changed to OK
Oct 15 08:37:34 Enclosure-Link: Service started
Oct 15 08:37:40 OA: HTTP server is up
Oct 15 08:37:40 Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:37:41 OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:37:41 OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:37:44 OA: Onboard Administrator booted successfully
Oct 15 08:37:51 OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:37:51 OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:37:51 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:38:24 OA: VLAN is disabled
Oct 15 08:39:19 OA: Internal health status of interconnect in bay 2 changed to OK
Oct 15 08:41:42 OA: Authentication failure for user admin on the OA serial console.
Oct 15 08:50:52 Kernel: Network link is down
Oct 15 08:51:06 OA: Time zone changed to GMT+1
Oct 15 08:51:08 OA: Blade in bay #2 status changed to Unknown
Oct 15 08:51:08 OA: Device 2 power delayed during device discovery.
Oct 15 08:51:09 OA: LCD Status is: OK.
Oct 15 08:51:10 OA: Blade in bay #2 status changed to OK
Oct 15 08:51:12 Enclosure-Link: Service started
Oct 15 08:51:18 Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:51:18 OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:51:18 OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:51:21 OA: HTTP server is up
Oct 15 08:51:24 OA: Onboard Administrator booted successfully
Oct 15 08:51:29 OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:51:29 OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:51:29 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:52:01 OA: VLAN is disabled
Oct 15 09:53:06 OA: Password for `Administrator' changed by system
Oct 15 08:53:29 Kernel: Network link is down
Oct 15 08:53:44 OA: Time zone changed to GMT+1
Oct 15 08:53:45 OA: Blade in bay #2 status changed to Unknown
Oct 15 08:53:46 OA: Device 2 power delayed during device discovery.
Oct 15 08:53:47 OA: LCD Status is: OK.
Oct 15 08:53:48 OA: Blade in bay #2 status changed to OK
Oct 15 08:53:50 Enclosure-Link: Service started
Oct 15 08:53:56 OA: Blade in bay #2 status changed from OK to Degraded
Oct 15 08:53:56 OA: Partner device 2 was denied power because the corresponding device is missing.
Oct 15 08:53:57 Enclosure-Link: Initial topology scan completed successfully
Oct 15 08:53:57 OA: HTTP server is up
Oct 15 08:54:00 OA: Onboard Administrator booted successfully
Oct 15 08:54:07 OA: PS Status Changed: Bay #1 From: unknown To: failed
Oct 15 08:54:07 OA: PS Status Changed: Bay #4 From: unknown To: failed
Oct 15 08:54:07 OA: Enclosure Status changed from OK to Degraded. (Power Subsystem)
Oct 15 08:54:16 OA: Authentication failure for user root on the OA serial console.
Oct 15 08:54:26 OA: Authentication failure for user administrator on the OA serial console.
Oct 15 08:54:37 OA: VLAN is disabled
Oct 15 08:54:40 OA: Authentication failure for user admin on the OA serial console.
Oct 15 09:01:30 OA: Administrator logged into the Onboard Administrator on the OA serial console.
Oct 15 09:03:20 Enclosure-Link: Found new Topology: New enclosure connected (1 total)
Oct 15 09:14:52 Enclosure-Link: Failed to get local address. Will keep retrying
Oct 15 09:15:31 Enclosure-Link: Failed to get local address. Will keep retrying
Oct 15 09:15:47 OA: Static TCP/IP settings were modified by user Administrator.
Oct 15 09:15:52 Kernel: Network link is down
Oct 15 09:16:12 Enclosure-Link: Failed to get local address. Will keep retrying
Oct 15 09:16:52 Enclosure-Link: Failed to get local address. Will keep retrying
>SHOW NETWORK
Enclosure Network Settings:
- - - - - IPv6 Information - - - - -
IPv6: Disabled
DHCPv6: Disabled
Router Advertisement: Disabled
Onboard Administrator Network Settings:
- - - - - IPv4 Information - - - - -
DHCP: Disabled
IPv4 Address: 192.168.16.16
Netmask: 255.255.255.0
Gateway Address: 0.0.0.0
- - - - - IPv6 Information - - - - -
Static Address: Not Set
Static IPv6 DNS 1: Not Set
Static IPv6 DNS 2: Not Set
- - - - - General Information - - - - -
Active DNS Addresses:
Primary: Not Set
Secondary: Not Set
Tertiary: Not Set
MAC Address: 00:1F:29:E7:24:0D
Network Link Settings: Link Auto-negotiation
Onboard Administrator Protocol Status:
Web (HTTP/HTTPS): Enabled
SNMP: Disabled
SecureSH: Enabled
FIPS Mode: Off
Trusted Hosts: Disabled
HPSIM Trust Mode: Disabled
Telnet: Enabled
AlertMail: Disabled
Mailbox: Not Set
SMTP Server: Not Set
Sender Domain: Not Set
XML Reply: Enabled
NTP: Enabled
Primary NTP server: 192.36.144.22
Secondary NTP server: 192.36.143.151
Server Poll-Interval: 720 seconds
Last Update: Update in progress
Link Loss Failover: Not Supported
Link Loss Interval: Not Supported
Enclosure IP Mode: Not Supported
GUI Login Detail: Disabled
Active Health System: Enabled
VLAN: Disabled
>SHOW POWER
Power Mode: Redundant
Dynamic Power: Enabled
Set Power Limit: Not Set
Power Capacity: 1200 Watts DC
Power Available: 660 Watts DC
Power Allocated: 540 Watts DC
Present Power: 181 Watts AC
Power Limit: 1459 Watts AC
>SHOW RACK NAME
Rack Name: ByggBlade
>SHOW RACK INFO
Rack Information:
Location hardware not found (No hardware support)
>SHOW SNMP
SNMP Configuration:
Status: Disabled
System Name: CZC8383004
System Location:
System Contact:
Read Community Name: public
Write Community Name:
No trap receivers specified.
>SHOW SSHFINGERPRINT
1024 sha1:59:89:d2:4f:d4:c1:c5:63:22:c3:9f:44:e7:ec:b5:b3:ae:e3:76:ea /etc/ssh/id_dsa.pub (DSA)
>SHOW SSHKEY
There is no SSH key installed.
>SHOW HPSIM INFO
HPSIM Trust Mode: Disabled
Trusted Server Certificates
No certificates were found.
>SHOW INTERCONNECT INFO ALL
1. Ethernet
Product Name: GbE2c Ethernet Blade Switch
Width: Single
URL to Management interface: http://10.0.209.68
In-Band IPv4 Address: 10.0.209.68
User Assigned Name:
Part Number: 410917-B21
Spare Part Number: 414037-001
Serial Number: MY383221E0
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Absent
Internal Serial Route to OA: Disabled
External Serial Port Interface: Present
External Ethernet Interface: Present
Manufacturer: HP
2. Fibre Channel
Product Name: Brocade 4/12 SAN Switch for HP c-Class BladeSystem
Width: Single
URL to Management interface: http://10.0.209.41
In-Band IPv4 Address: 10.0.209.41
User Assigned Name: BYGGSANSW
Part Number: AE370A
Spare Part Number: 411120-001
Serial Number: CN8820606G
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Present
Internal Serial Route to OA: Enabled
Serial Port Baud Rate: 9600
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: BROCADE
3. <absent>
4. <absent>
>SHOW INTERCONNECT LIST
Bay Interconnect Type Manufacturer Power Health UID Management IP
--- ----------------- -------------------- ------- --------- --- ---------------
1 Ethernet HP On OK Off 10.0.209.68
2 Fibre Channel BROCADE On OK Off 10.0.209.41
3 [Absent]
4 [Absent]
Totals: 2 interconnect modules installed, 2 powered on.
>SHOW INTERCONNECT SESSION
Interconnect Bay User
------------------ --------------
No Interconnect remote console sessions were detected.
>SHOW INTERCONNECT STATUS ALL
Interconnect Module #1 Status:
Status: OK
Thermal: OK
CPU Fault: OK
Health LED: OK
UID: Off
Powered: On
Diagnostic Status:
Internal Data OK
Management Processor OK
Thermal Warning OK
Thermal Danger OK
Power OK
Device Failure OK
Device Degraded OK
Interconnect Module #2 Status:
Status: OK
Thermal: OK
CPU Fault: OK
Health LED: OK
UID: Off
Powered: On
Diagnostic Status:
Internal Data OK
Management Processor OK
Thermal Warning OK
Thermal Danger OK
Power OK
Device Failure OK
Device Degraded OK
Interconnect Module #3 Status:
Interconnect Module Type: No Interconnect Module Installed
Interconnect Module #4 Status:
Interconnect Module Type: No Interconnect Module Installed
>SHOW INTERCONNECT PORT MAP ALL
1: GbE2c Ethernet Blade Switch
Type: Ethernet
Width: Single
Status: No Connection
2: Brocade 4/12 SAN Switch for HP c-Class BladeSystem
Type: Fibre
Width: Single
Status: No Connection
3. <absent>
4. <absent>
>SHOW INTERCONNECT POWERDELAY ALL
Current PowerDelay Status: Not in Progress
Bay Device PowerDelay State Delay (seconds)
--- -------------------------------- ---------------- ---------------
1 GbE2c Ethernet Blade Switch Disabled 0
2 Brocade 4/12 SAN Switch for HP c Disabled 0
3 Absent Disabled 0
4 Absent Disabled 0
>SHOW SERVER LIST
Bay iLO Name iLO IP Address Status Power UID Partner
--- ----------------------------- --------------- -------- ------- --- -------
1 [Absent]
2 Storage Blade N/A Degraded Off Off
3 [Absent]
4 [Absent]
5 [Absent]
6 [Absent]
7 [Absent]
8 [Absent]
Totals: 1 server blades installed, 0 powered on.
>SHOW SERVER NAMES
Bay Server Name Serial Number Status Power UID Partner
--- ----------------------------- --------------- -------- ------- --- -------
1 [Absent]
2 Storage Blade SGI8360058 Degraded Off Off
3 [Absent]
4 [Absent]
5 [Absent]
6 [Absent]
7 [Absent]
8 [Absent]
Totals: 1 server blades installed, 0 powered on.
>SHOW FRU
Enclosure
Model: BladeSystem c3000 Enclosure
Manufacturer: HP
Serial Number: CZC8383004
Part Number: 437502-B21
Enclosure Midplane
Manufacturer: HP
Spare Part Number: 441829-001
Onboard Administrator 1
Model: BladeSystem c3000 Onboard Administrator
Manufacturer: HP
Serial Number: P3059%%9VW909F
Part Number: 448589-B21
Spare Part Number: 441832-001
Firmware Version: 3.71
HwVersion: %%
Blade 2
Model: HP StorageWorks SB40c
Manufacturer: HP
Serial Number: SGI8360058
Part Number: 411243-B21
Spare Part Number: 430798-001
Interconnect 1
Model: GbE2c Ethernet Blade Switch
Manufacturer: HP
Serial Number: MY383221E0
Part Number: 410917-B21
Spare Part Number: 414037-001
Interconnect 2
Model: Brocade 4/12 SAN Switch for HP c-Class BladeSystem
Manufacturer: BROCADE
Serial Number: CN8820606G
Part Number: AE370A
Spare Part Number: 411120-001
Fan 1
Model: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Fan 2
Model: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Fan 3
Model: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Fan 4
Model: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Fan 5
Model: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Fan 6
Model: Active Cool 200 Fan
Part Number: 412140-B21
Spare Part Number: 413996-001
Power Supply 1
Model: HP PROLIANT SERVER PS
Serial Number: 531290A4DW650P
Part Number: 437572-B21
Spare Part Number: 441830-001
Power Supply 2
Model: HP PROLIANT SERVER PS
Serial Number: 531290A4DW96UL
Part Number: 437572-B21
Spare Part Number: 441830-001
Power Supply 4
Model: HP PROLIANT SERVER PS
Serial Number: 531290A4DWJ1NR
Part Number: 437572-B21
Spare Part Number: 441830-001
Power Supply 5
Model: HP PROLIANT SERVER PS
Serial Number: 531290A4DW96UN
Part Number: 437572-B21
Spare Part Number: 441830-001
Insight Display
Model: BladeSystem c3000 Insight Display
Manufacturer: HP
Spare Part Number: 441831-001
Firmware Version: 2.2.2
>SHOW SERVER INFO ALL
Server Blade #1 Information:
Server Blade Type: No Server Blade Installed
Server Blade #2 Information:
Type: Storage Blade
Manufacturer: HP
Product Name: HP StorageWorks SB40c
Part Number: 411243-B21
System Board Spare Part Number: 430798-001
Serial Number: SGI8360058
ROM Version: 1.20
Server Blade #3 Information:
Server Blade Type: No Server Blade Installed
Server Blade #4 Information:
Server Blade Type: No Server Blade Installed
Server Blade #5 Information:
Server Blade Type: No Server Blade Installed
Server Blade #6 Information:
Server Blade Type: No Server Blade Installed
Server Blade #7 Information:
Server Blade Type: No Server Blade Installed
Server Blade #8 Information:
Server Blade Type: No Server Blade Installed
>SHOW SERVER PORT MAP ALL
Mezz
Mezz Mezz Device Port Interconnect Interconnect
Slot Device Port Status Bay Bay Port Device ID
---- ------ ------ ---------- ------------ ------------ ----------------
------------------------------- Blade 001 -------------------------------
<absent>
------------------------------- Blade 002 -------------------------------
No Port Mapping information available for blade 2
------------------------------- Blade 003 -------------------------------
<absent>
------------------------------- Blade 004 -------------------------------
<absent>
------------------------------- Blade 005 -------------------------------
<absent>
------------------------------- Blade 006 -------------------------------
<absent>
------------------------------- Blade 007 -------------------------------
<absent>
------------------------------- Blade 008 -------------------------------
<absent>
>SHOW SERVER STATUS ALL
Blade #1 Status:
Power: No Server Blade Installed
Blade #2 Status:
Power: Off
Current Wattage used: 0
Health: Degraded
Unit Identification LED: Off
Virtual Fan: 0%
Diagnostic Status:
Internal Data OK
Management Processor OK
Missing Device Failed
Blade #3 Status:
Power: No Server Blade Installed
Blade #4 Status:
Power: No Server Blade Installed
Blade #5 Status:
Power: No Server Blade Installed
Blade #6 Status:
Power: No Server Blade Installed
Blade #7 Status:
Power: No Server Blade Installed
Blade #8 Status:
Power: No Server Blade Installed
>SHOW SERVER TEMP ALL
Device Bay #1 Temperature Information
No Server Blade Installed
Device Bay #2 Temperature Information
Blade Power is Off. Cannot retrieve data.
Device Bay #3 Temperature Information
No Server Blade Installed
Device Bay #4 Temperature Information
No Server Blade Installed
Device Bay #5 Temperature Information
No Server Blade Installed
Device Bay #6 Temperature Information
No Server Blade Installed
Device Bay #7 Temperature Information
No Server Blade Installed
Device Bay #8 Temperature Information
No Server Blade Installed
>SHOW SERVER DVD ALL
DVD Drive: Absent
Server DVD connections:
Bay Connected Device or image URL
--- --------- -------------------------------------
1 - [Bay empty]
2 - [Non-server blade]
3 - [Bay empty]
4 - [Bay empty]
5 - [Bay empty]
6 - [Bay empty]
7 - [Bay empty]
8 - [Bay empty]
>SHOW SERVER POWERDELAY ALL
Current PowerDelay Status: Not in Progress
Bay Device PowerDelay State Delay (seconds)
--- -------------------------------- ---------------- ---------------
1 Absent Disabled 0
1A Absent Disabled 0
1B Absent Disabled 0
2 HP StorageWorks SB40c Disabled 0
2A Absent Disabled 0
2B Absent Disabled 0
3 Absent Disabled 0
3A Absent Disabled 0
3B Absent Disabled 0
4 Absent Disabled 0
4A Absent Disabled 0
4B Absent Disabled 0
5 Absent Disabled 0
5A Absent Disabled 0
5B Absent Disabled 0
6 Absent Disabled 0
6A Absent Disabled 0
6B Absent Disabled 0
7 Absent Disabled 0
7A Absent Disabled 0
7B Absent Disabled 0
8 Absent Disabled 0
8A Absent Disabled 0
8B Absent Disabled 0
>SHOW SERVER BOOT ALL
Server Blade #1 Boot Information:
The blade is not present.
Server Blade #2 Boot Information:
One time boot from: None
IPL Devices (Boot Order):
Server Blade #3 Boot Information:
The blade is not present.
Server Blade #4 Boot Information:
The blade is not present.
Server Blade #5 Boot Information:
The blade is not present.
Server Blade #6 Boot Information:
The blade is not present.
Server Blade #7 Boot Information:
The blade is not present.
Server Blade #8 Boot Information:
The blade is not present.
>SHOW SYSLOG SERVER ALL
Retrieving Server syslog(s) ...
Server 1 Syslog:
The blade is not present.
Server 2 Syslog:
Could not determine the ip address of the management processor for blade
Server 3 Syslog:
The blade is not present.
Server 4 Syslog:
The blade is not present.
Server 5 Syslog:
The blade is not present.
Server 6 Syslog:
The blade is not present.
Server 7 Syslog:
The blade is not present.
Server 8 Syslog:
The blade is not present.
>SHOW SYSLOG ILO ALL
Retrieving iLO Event Log ...
Server 1 iLO Event Log:
The blade is not present.
Server 2 iLO Event Log:
Could not determine the ip address of the management processor for blade
Server 3 iLO Event Log:
The blade is not present.
Server 4 iLO Event Log:
The blade is not present.
Server 5 iLO Event Log:
The blade is not present.
Server 6 iLO Event Log:
The blade is not present.
Server 7 iLO Event Log:
The blade is not present.
Server 8 iLO Event Log:
The blade is not present.
>SHOW TOPOLOGY
Detecting linked enclosures .
An error occurred while communicating with the other Onboard Administrator.
!.
Rack Topology (top-down)
Rack UUID: [Unknown]
Rack Name:
Enclosure Name Status Local IP Address UUID
-------------------------------- -------- ----- --------------- --------------
Unknown Yes
>SHOW USBKEY
No USB keys detected in this Onboard Administrator. Note: USB keys can only be used in the Active Onboard Administrator.
>SHOW USER (current user)
Local User "Administrator" Information:
Full name: System Administrator
Contact Info:
User Rights: Admin
Account Status: Enabled
Server Bay Access List: 1 1A 1B 2 2A 2B 3 3A 3B 4 4A 4B 5 5A 5B 6 6A 6B 7 7A 7B 8 8A 8B
Interconnect Bay Access List: 1 2 3 4
OA Access: Yes
>SHOW USER LIST
* denotes current user
Privilege Acct.
User Name Full Name Level Status
---------------------------------------- -------------------- ---------- ---------
* Administrator System Administrator Admin Enabled
>SHOW LDAP INFO
Directory Services (LDAP)
Enabled : Disabled
Local Users Enabled : Enabled
NT Name Mapping : Disabled
Directory Server :
Directory Server SSL Port : 0
Search Context #1 :
Search Context #2 :
Search Context #3 :
Search Context #4 :
Search Context #5 :
Search Context #6 :
>SHOW LDAP CERTIFICATE
No certificates were found.
>SHOW LDAP GROUP LIST
No LDAP groups were detected.
>SHOW CA CERTIFICATE
No CA certificates are imported.
>SHOW TWOFACTOR INFO
Two Factor Authentication:
Enabled : Disabled
Certificate Revocation : Disabled
Certificate Owner Field : Subject
>SHOW PASSWORD SETTINGS
Strong Passwords: Disabled
Minimum Password Length: 3
>SHOW UPDATE
Device Name Location Version NewVersion
-----------------------------------------------------------------------------------
TRAY | BladeSystem c3000 Onboard Administrator | - | 2.10 | 2.10
LCD | BladeSystem c3000 Insight Display | - | 2.2.2 | 2.2.2
BLADE | HP StorageWorks SB40c | 2 | 1.20 | 2.20
FAN | Active Cool 200 Fan | 1 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 2 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 3 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 4 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 5 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 6 | 2.9.4 | 2.9.4
>SHOW SYSLOG SETTINGS
Remote log: Disabled
Address:
Port: 514
>SHOW VCMODE
Virtual Connect Mode: Disabled
>SHOW SESSION TIMEOUT
Session Timeout: Disabled
>SHOW VLAN
VLAN is disabled. OA VLAN ID = 1. Default VLAN ID (untagged) = 1.
VLAN VLAN NAME
---- ---------
1 Default
Device Settings
BAY VLAN
--- ----
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
Interconnect Settings
BAY VLAN
--- ----
1 1
2 1
3 1
4 1
>SHOW URB
Utility Ready Blade (URB) Reporting Settings
URB Reporting: Disabled
Endpoint URL:
Proxy URL:
SMTP Server:
Email Address:
Interval: Daily at hour 0
Last Attempt: HTTP Failed on Wed Dec 31 23:00:00 1969
SMTP Failed on Wed Dec 31 23:00:00 1969
>SHOW FIRMWARE SUMMARY
Enclosure Firmware Summary
Onboard Administrator Firmware Information
Bay Model Firmware Version
--- -------------------------------------------------- ----------------
1 BladeSystem c3000 Onboard Administrator 3.71
Enclosure Component Firmware Information
Device Name Location Version NewVersion
-----------------------------------------------------------------------------------
TRAY | BladeSystem c3000 Onboard Administrator | - | 2.10 | 2.10
LCD | BladeSystem c3000 Insight Display | - | 2.2.2 | 2.2.2
BLADE | HP StorageWorks SB40c | 2 | 1.20 | 2.20
FAN | Active Cool 200 Fan | 1 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 2 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 3 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 4 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 5 | 2.9.4 | 2.9.4
FAN | Active Cool 200 Fan | 6 | 2.9.4 | 2.9.4
Device Firmware Information
Interconnect Firmware Information
Bay Device Model Firmware Version
--- --------------------------------------------------- ----------------
1 GbE2c Ethernet Blade Switch [Not Available]
2 Brocade 4/12 SAN Switch for HP c-Class BladeSystem [Not Available]
>SHOW FIRMWARE SUMMARY CSV
Bay Number, Device Name, Discovered, Firmware Component, Current Version, Firmware ISO Version
>SHOW FIRMWARE MANAGEMENT
Enclosure Firmware Settings
Enclosure: CZC8383004
Firmware Management: Disabled
- Force Downgrade: Disabled
- Firmware ISO URL: Not Set
- Firmware Power Policy: OFF
- Firmware Policy: Manual Only
- Firmware Date: Not Set
- Bays to Include
Server Bays: None
Firmware ISO Information:
- ISO URL Status: N/A
>SHOW FIRMWARE MANAGEMENT LOG
May 29 08:40:32 Enclosure Firmware Management started.
Jun 18 13:22:43 Enclosure Firmware Management started.
Sep 24 11:01:36 Enclosure Firmware Management started.
Dec 19 13:54:43 Enclosure Firmware Management started.
Mar 10 13:43:09 Enclosure Firmware Management started.
Apr 15 22:09:28 Enclosure Firmware Management started.
Nov 28 08:50:29 Enclosure Firmware Management terminated.
Nov 28 08:51:32 Enclosure Firmware Management started.
Oct 15 08:00:01 Enclosure Firmware Management started.
Oct 15 08:37:36 Enclosure Firmware Management started.
Oct 15 08:51:13 Enclosure Firmware Management started.
Oct 15 08:53:52 Enclosure Firmware Management started.
>SHOW FIRMWARE LOG SERVER ALL
There are no firmware logs to display.
>SHOW SERVER FIRMWARE ALL
Device Firmware Information
>SHOW REMOTE_SUPPORT
Status : Disabled
Connection type : None
IRS Hostname :
IRS Port : 0
Last successful registration : 0000-00-00T00:00:00
Last successful unregistration : 0000-00-00T00:00:00
Last successful Data Collection : 0000-00-00T00:00:00
Last successful Service Event : 0000-00-00T00:00:00
Failed Data Collection attempts : 0
Failed Service Event attempts : 0
Maintenance Mode : Disabled
>SHOW REMOTE_SUPPORT EVENT
(No Remote Support Service Events)
>SHOW DEVICE SERIAL_NUMBER BLADE ALL
Blade #1 Information:
The specified bay is empty.
Blade #2 Information:
Serial Number: SGI8360058
Blade #3 Information:
The specified bay is empty.
Blade #4 Information:
The specified bay is empty.
Blade #5 Information:
The specified bay is empty.
Blade #6 Information:
The specified bay is empty.
Blade #7 Information:
The specified bay is empty.
Blade #8 Information:
The specified bay is empty.
>SHOW SOLUTIONSID
0000000000000000
>SHOW LOGIN_BANNER
Login Banner:
Status : Disabled
Login Banner Text :
(* empty *)
OA-BYGGBLADE>
[edit] iDRAC 7 configuration of esxi-f1 (drac-f1.cnap.hv.se)
- username is root password is "MoaHaHaHaa"#¤"#¤" 6 %#&#¤"
- iDRAC7 now supports updating server components using Racadm and Web GUI
- Dell Update Package (DUP) Updating Dell PowerEdge servers via bootable media / ISO
- Dell Repository Manager ,v2.0
- [ http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=9RX9M Dell Repository Manager ,v2.2] allows you to create customized bundles and repositories
- OpenManage VIB for ESXi ???
Power Supply.Slot.1 00.0C.6F Integrated Dell Remote Access Controller 2.41.40.40 Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:60 20.2.17 Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:61 20.2.17 Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:62 20.2.17 Broadcom Gigabit Ethernet BCM5720 - 18:66:DA:86:B2:63 20.2.17 BIOS 2.3.4 PERC H330 Mini 25.5.0.0019 Disk 0 in Backplane 1 of Integrated RAID Controller 1 DS03 BP13G+ 0:1 2.23 Lifecycle Controller 2.41.40.40 Dell 32 Bit uEFI Diagnostics, version 4239, 4239A33, 4239.41 4239A33 Dell OS Driver Pack, 16.10.10, A00 16.10.10 OS COLLECTOR 2.1, A00 2.1 System CPLD 1.0.3 PERC H330 Mini (Embedded) Integrated RAID Controller 1 25.5.0.0019 Information Not Available
