View source for INT-firewalld konfiguration

Nedanstående fungerar <font color="red">ej</font>!
=Skapa nya zoner=
When adding a zone, you must add it to the permanent firewall configuration. You can then reload to bring the configuration into your running session. For instance, we could create the two zones we discussed above by typing:

    firewall-cmd --permanent --new-zone=kompisar
    firewall-cmd --permanent --new-zone=allihopa
    firewall-cmd --permanent --zone=drop --change-interface=ens160
  
    firewall-cmd --reload
    firewall-cmd --permanent --get-zones

= Lägg in vilka nät =

  firewall-cmd --permanent --zone=kompisar --add-source=193.10.128.0/17
  firewall-cmd --permanent --zone=kompisar --add-source=212.25.132.0/23
  firewall-cmd --reload

= Lägg till tjänster =
    sudo firewall-cmd --zone=kompisar --add-service=ssh
    sudo firewall-cmd --zone=allihopa --add-service=http
    sudo firewall-cmd --zone=allihopa --add-service=https
   
    firewall-cmd --reload
    
    firewall-cmd --zone=kompisar --list-all
    firewall-cmd --zone=allihopa --list-all
= Överkurs =
 '''firewall-cmd --direct --get-all-rules'''
 ipv4 filter INPUT 0 -m state --state NEW -j LOG '--log-prefix=RobLog '